Đặc tính
| Housing | Cylindrical thread design |
| Thread size | M12 x 1 |
| Diameter | Ø 12 mm |
| Sensing range Sn | 5 mm … 90 mm 1) |
| Safe sensing range Sa | 72.9 mm |
| Magnetic sensitivity | ≤ 0.6 mT |
| Switching frequency | 1,000 Hz |
| Connection type | Cable with connector M9, 5-pin, with knurled nuts, 0.8 m |
| Switching output | NAMUR |
| Output characteristic | Control current depending on switching state according to NAMUR EN 60947-5-6 |
| Electrical wiring | DC 2-wire |
| Magnetic alignment | Axial |
| Enclosure rating | IP67 2) |
Cơ khí/ Điện tử
| Ripple | ≤ 5 % 1) |
| Time delay before availability | ≤ 2 ms |
| Hysteresis | ≤ 25 % |
| Reproducibility | ≤ 1 % 2) |
| Temperature drift (of Sr) | ± 10 % |
| EMC | According to EN 60947-5-2 |
| Current consumption, sensor is activated | ≥ 2.5 mA |
| Current consumption, sensor is not activated | ≤ 1 mA |
| Cable material | PUR |
| Conductor size | 0.25 mm² |
| Cable resistance | ≤ 50 Ω |
| Wire-break protection | ✔ |
| Short-circuit protection | ✔ |
| Reverse polarity protection | ✔ |
| Shock and vibration resistance | 30 g, 11 ms / 10 … 55 Hz, 1 mm |
| Ambient operating temperature | –25 °C … +70 °C |
| Housing material | Metal, Nickel-plated brass |
| Housing length | 50 mm |
| Thread length | 40 mm |
| Tightening torque, max. | ≤ 7 Nm |
| Items supplied | Mounting nut, brass, nickel-plated (2x) |
| EC Approval Certificate | TÜV 19 ATEX 241335 |
| ATEX marking | EX II 1G Ex ia IIC T6 Ga EX II 1D Ex ia IIIC T85 °C Da Ta: –25 °C … +70 °C |
| Ex area category | 1G, 1D |
| Input voltage Ui max. | 16 V 3) |
| Input power Pi max. | 100 mW 3) |
| Input current Ii max. | 30 mA 3) |
| Internal capacitance Ci max. | 130 nF 3) |
| Internal inductance Li max. | 10 µH 3) |
| Nominal voltage | 8.2 V DC |
