WSE26P-39112102ZZZ

Compact photoelectric sensors
W26

sản phẩm chính hãng, MỚI 100% CHƯA SỬ DỤNG
SẢN PHẨM LUÔN ĐƯỢC KIỂM TRA TRƯỚC KHI XUẤT KHO
BẢO HÀNH 12 THÁNG ĐỐI VỚI LỖI CỦA NHÀ SẢN XUẤT / HOẶC THEO CHÍNH SÁCH CỦA SẢN PHẨM DO TRƯỜNG THỊNH PHÂN PHỐI
HỖ TRỢ KỸ THUẬT 24/7
MIỄN PHÍ GIAO HÀNG ĐỐI VỚI CÁC ĐƠN HÀNG TỪ 8,000,000VNĐ

Liên hệ:

SKU: WSE26P-39112102ZZZ Danh mục: Photoelectric sensors Thẻ: 1102912, WSE26P-39112102ZZZ

Mô tả

Show all

Hide all

Features

Functional principle

Through-beam photoelectric sensor

Sensing range
Sensing range min.	0 m
Sensing range max.	60 m
Maximum distance range from receiver to sender (operating reserve 1)	0 m … 60 m
Recommended distance range from receiver to sender (operating reserve 2)	0 m … 50 m
Recommended sensing range for the best performance	0 m … 50 m

Emitted beam
Light source	PinPoint LED
Type of light	Visible red light
Shape of light spot	Point-shaped
Light spot size (distance)	Ø 115 mm (15 m)
Maximum dispersion of the emitted beam around the standardized transmission axis (squint angle)	< +/- 1.0° (at Ta = +23 °C)

Key LED figures
Normative reference	EN 62471:2008-09 \| IEC 62471:2006, modified
LED risk group marking	Free group
Wave length	635 nm
Average service life	100,000 h at T_a = +25 °C

Adjustment
Teach-Turn adjustment	BluePilot: for configuring the time function
Wire/pin	For activating the test input

Indication
LED blue 1	BluePilot: Alignment aid
LED blue 2	BluePilot: Time function display
LED green	Operating indicator Static on: power on
LED yellow	Status of received light beam Static on: object not present Static off: object present Flashing: Below the 1.5 function reserve

Safety-related parameters

MTTF_D 438 years

DC_avg 0 %

T_M (mission time)
20 years (EN ISO 13849)

Rate of use: 60 %

Electrical data

Supply voltage U_B

10 V DC … 30 V DC ¹⁾

Ripple

≤ 5 V_pp

Usage category

DC-12 (According to EN 60947-5-2)

DC-13 (According to EN 60947-5-2)

Current consumption, sender

≤ 30 mA, without load. At U_B = 24 V

< 50 mA ²⁾

Current consumption, receiver

≤ 30 mA, without load. At U_B = 24 V

< 50 mA ²⁾

Protection class

III

Digital output
Number	2 (Complementary)
Type	Push-pull: PNP/NPN
Signal voltage PNP HIGH/LOW	Approx. U_B-2.5 V / 0 V
Signal voltage NPN HIGH/LOW	Approx. U_B / < 2.5 V
Output current I_max.	≤ 100 mA
Circuit protection outputs	Reverse polarity protected
	Overcurrent and short-circuit protected
Response time	≤ 500 µs ³⁾
Repeatability (response time)	150 µs
Switching frequency	1,000 Hz ⁴⁾
Time functions	Deactivated (factory setting)
	On delay
	Off delay
	ON and OFF delay
	Impulse (one shot)
Delay time	Teach-turn adjustment, 0 ms … 30,000 ms, 0 ms (factory setting)

Pin/Wire assignment, sender
Pin 6 function/gray (GY)	Test at 0 V

Pin/Wire assignment, receiver
Function of pin 4/black (BK)	Digital output, light switching, object present → output Q_L1 LOW
Pin 5 function/white (WH)	Digital output, dark switching, object present → output Ǭ_L1 HIGH

Output function

Factory setting: Pin 5 / black: NPN normally closed (light switching), PNP normally open (dark switching), Pin 4 / black: NPN normally open (dark switching), PNP normally closed (light switching)

¹⁾ Limit values.
²⁾ 10 V DC … 16 V DC, without load.
³⁾ Signal transit time with resistive load in switching mode.
⁴⁾ With light/dark ratio 1:1.

Mechanical data

Housing

Rectangular

Dimensions (W x H x D)

24.6 mm x 82.5 mm x 53.3 mm

Connection

Cable with connector Q6, 6-pin, DC-coding, 298 mm

Connection detail
Deep-freeze property	Do not bend below 0 °C
Conductor size	0.14 mm²
Cable diameter	Ø 4.8 mm
Length of cable (L)	270 mm
Bending radius	For flexible use > 12 x cable diameter
Bending cycles	1,000,000

Material
Housing	Plastic, VISTAL®
Front screen	Plastic, PMMA
Cable	PVC
Male connector	Plastic, VISTAL®

Weight

Approx. 200 g

Maximum tightening torque of the fixing screws

1.3 Nm

Ambient data

Enclosure rating	IP65 (EN 60529)
Ambient operating temperature	–40 °C … +60 °C
Ambient temperature, storage	–40 °C … +75 °C
Shock resistance	50 g, 11 ms (25 positive and 25 negative shocks per axis, for X, Y, Z axes, 150 shocks in total (EN60068-2-27)) 50 g, 6 ms (5,000 positive and 5,000 negative shocks per axis, for X, Y, Z axes, 30,000 shocks in total (EN60068-2-27))
Vibration resistance	10 Hz … 2,000 Hz (Amplitude 0.5 mm / 10 g, 20 sweeps per axis, for X, Y, Z axes, 1 octave/min, (EN60068-2-6))
Air humidity	35 % … 95 %, Relative humidity (no condensation)
Electromagnetic compatibility (EMC)	EN 60947-5-2
UL File No.	NRKH.E181493 & NRKH7.E181493

Classifications

eCl@ss 5.0	27270901
eCl@ss 5.1.4	27270901
eCl@ss 6.0	27270901
eCl@ss 6.2	27270901
eCl@ss 7.0	27270901
eCl@ss 8.0	27270901
eCl@ss 8.1	27270901
eCl@ss 9.0	27270901
eCl@ss 10.0	27270901
eCl@ss 11.0	27270901
eCl@ss 12.0	27270901
ETIM 5.0	EC002716
ETIM 6.0	EC002716
ETIM 7.0	EC002716
ETIM 8.0	EC002716
UNSPSC 16.0901	39121528