Key Commercial Data
Orderkey | 2910360 |
---|---|
Packing unit | 1 pc |
GTIN | 4055626445007 |
Weight per Piece (excluding packing) | 523.000 g |
Custom tariff number | 85363030 |
Country of origin | US (United States) |
Ambient conditions
Degree of protection | IP20 (only when all terminal points are used) |
---|---|
Ambient temperature (operation) | -40 °C … 80 °C |
Ambient temperature (storage/transport) | -40 °C … 80 °C |
Altitude | ≤ 2000 m (amsl (above mean sea level)) |
Permissible humidity (operation) | 5 % … 95 % |
Shock (operation) | 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
Vibration (operation) | 7.5g (10 … 500 Hz / 2.5 h / X, Y, Z) |
General
IEC test classification | I / II |
---|---|
T1 / T2 | |
EN type | T1 / T2 |
IEC power supply system | TN-S |
TT | |
Mode of protection | L-N |
L-PE | |
N-PE | |
Mounting type | DIN rail: 35 mm |
Color | jet black RAL 9005 |
Housing material | PA 6.6 |
PBT | |
Degree of pollution | 2 |
Flammability rating according to UL 94 | V-0 |
Type | DIN rail module, two-section, divisible |
Number of positions | 4 |
Surge protection fault message | Optical, remote indicator contact |
Protective circuit
Nominal voltage UN | 120/208 V AC (TN-S) |
---|---|
120/208 V AC (TT) | |
Nominal frequency fN | 50 Hz (60 Hz) |
Maximum continuous operating voltage UC(L-N) | 175 V AC |
Maximum continuous voltage UC(N-PE) | 264 V AC |
Rated load current IL | 80 A |
Residual current IPE | ≤ 5 µA |
Nominal discharge current In(8/20) µs (L-N) | 12.5 kA |
Nominal discharge current In(8/20) µs (L-PE) | 12.5 kA |
Nominal discharge current In(8/20) µs (N-PE) | 50 kA |
Total discharge current Itotal(10/350) µs | 50 kA |
Follow current interrupt rating Ifi(N-PE) | 100 A (264 V AC) |
Short-circuit current rating ISCCR | 25 kA |
Voltage protection level Up(L-N) | ≤ 0.8 kV |
Voltage protection level Up(L-PE) | ≤ 2 kV |
Voltage protection level Up(N-PE) | ≤ 1.7 kV |
Residual voltage Ures(L-N) | ≤ 0.8 kV (at In) |
≤ 0.75 kV (at 10 kA) | |
≤ 0.65 kV (at 5 kA) | |
≤ 0.6 kV (at 3 kA) | |
Residual voltage Ures(L-PE) | ≤ 2 kV (at In) |
≤ 1.5 kV (at 10 kA) | |
≤ 1.4 kV (at 5 kA) | |
≤ 1.3 kV (at 3 kA) | |
Residual voltage Ures(N-PE) | ≤ 0.6 kV (at In) |
≤ 0.5 kV (at 10 kA) | |
≤ 0.5 kV (at 5 kA) | |
≤ 0.4 kV (at 3 kA) | |
TOV behavior at UT(L-N) | 208 V AC (5 s / withstand mode) |
240 V AC (120 min / safe failure mode) | |
TOV behavior at UT(N-PE) | 1200 V AC (200 ms / withstand mode) |
Response time tA(L-N) | ≤ 25 ns |
Response time tA(L-PE) | ≤ 100 ns |
Response time tA(N-PE) | ≤ 100 ns |
Max. backup fuse with V-type through wiring | 80 A (gG) |
Max. backup fuse with branch wiring | 160 A (gG) |
Indicator/remote signaling
Switching function | PDT contact |
---|---|
Operating voltage | 5 V AC … 250 V AC |
30 V DC | |
Operating current | 5 mA AC … 1.5 A AC |
1 A DC | |
Connection method | Screw connection |
Screw thread | M2 |
Tightening torque | 0.25 Nm |
Stripping length | 7 mm |
Conductor cross section flexible | 0.14 mm² … 1.5 mm² |
Conductor cross section solid | 0.14 mm² … 1.5 mm² |
Conductor cross section AWG | 28 … 16 |