Key Commercial Data
Orderkey | 0916606 |
---|---|
Packing unit | 6 pc |
Catalog page | Page 332 (C-4-2017) |
GTIN | 4046356449021 |
Weight per Piece (excluding packing) | 63.330 g |
Custom tariff number | 85362010 |
Country of origin | CZ (Czech Republic) |
General
Number of levels | 1 |
---|---|
Number of connections | 2 |
Mounting type | DIN rail: 35 mm |
Color | gray |
Number of positions | 1 |
Overvoltage category_GRP | II |
Insulating material | PA66 |
Flammability rating according to UL 94 | V0 |
Electrical data
Fuse type | Automatic device |
---|---|
Rated surge voltage | 2.8 kV |
Rated voltage | 240 V AC (50/60 Hz) |
28 V DC | |
240 V AC (50/60 Hz) | |
28 V DC | |
Operating voltage | 50 V AC … 264 V AC (48 – 62 Hz) |
5 V DC … 30.8 V DC | |
Rated current IN | 4 A |
Rated insulation voltage Ui | 440 V AC |
Insulation resistance Riso | > 100 MΩ (main contact) |
Required backup fuse | 16 A |
Rated short-circuit switching capacity Icn | 200 A (240 V AC) |
400 A (28 V DC) | |
Dielectric strength | 2000 V |
Switching cycles, max. | 6000 (at 1 x In) |
50 (at 1.5 x In) | |
40 (at 6 x In) | |
Degree of pollution | 2 |
Overvoltage category_GRP | II |
Ambient conditions
Ambient temperature (operation) | -30 °C … 60 °C |
---|---|
Altitude | 2000 m (acc. to EN 60934) |
Degree of protection | IP40 (Actuation area) |
IP20 (Connection area) |
Connection data
Conductor cross section solid min. | 0.2 mm² |
---|---|
Conductor cross section solid max. | 10 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 10 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 8 |
Conductor cross section flexible, with ferrule without plastic sleeve min. | 0.25 mm² |
Conductor cross section flexible, with ferrule without plastic sleeve max. | 6 mm² |
Conductor cross section flexible, with ferrule with plastic sleeve min. | 0.25 mm² |
Conductor cross section flexible, with ferrule with plastic sleeve max. | 6 mm² |
2 conductors with same cross section, solid min. | 0.2 mm² |
2 conductors with same cross section, solid max. | 2.5 mm² |
2 conductors with same cross section, stranded min. | 0.2 mm² |
2 conductors with same cross section, stranded max. | 2.5 mm² |
2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. | 0.25 mm² |
2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. | 1.5 mm² |
2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, min. | 0.5 mm² |
2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, max. | 4 mm² |
Connection method | Screw connection |
Stripping length | 10 mm |
Screw thread | M4 |
Tightening torque, min | 1.5 Nm |
Tightening torque max | 1.8 Nm |