WTB9LC-3P3492A00

Small photoelectric sensors
W9

sản phẩm chính hãng, MỚI 100% CHƯA SỬ DỤNG
SẢN PHẨM LUÔN ĐƯỢC KIỂM TRA TRƯỚC KHI XUẤT KHO
BẢO HÀNH 12 THÁNG ĐỐI VỚI LỖI CỦA NHÀ SẢN XUẤT / HOẶC THEO CHÍNH SÁCH CỦA SẢN PHẨM DO TRƯỜNG THỊNH PHÂN PHỐI
HỖ TRỢ KỸ THUẬT 24/7
MIỄN PHÍ GIAO HÀNG ĐỐI VỚI CÁC ĐƠN HÀNG TỪ 8,000,000VNĐ

SKU: WTB9LC-3P3492A00 Danh mục: Photoelectric sensors Thẻ: 1125677, WTB9LC-3P3492A00

Features

Functional principle	Photoelectric proximity sensor
Functional principle detail	Background suppression
Dimensions (W x H x D)	12.2 mm x 52.2 mm x 23.6 mm
Housing design (light emission)	Rectangular
Mounting hole	M3
Sensing range max.	25 mm … 400 mm ¹⁾
Sensing range	25 mm … 400 mm ¹⁾
Type of light	Visible red light
Light source	Laser ²⁾
Light spot size (distance)	Ø 0.9 mm (230 mm)
Wave length	650 nm
Laser class	2 (IEC 60825-1 / CDRH 21 CFR 1040.10 & 1040.11)
Adjustment	IO-Link Single teach-in button
Pin 2 configuration	External input, Teach-in input, Sender off input, Detection output, logic output
Special applications	Detecting small objects

Mechanics/electronics

Supply voltage	10 V DC … 30 V DC ¹⁾
Ripple	< 5 V_pp ²⁾
Current consumption	30 mA ³⁾
Switching output	PNP ⁴⁾
Output function	Complementary
Switching mode	Light/dark switching ⁴⁾
Output current I_max.	≤ 100 mA
Response time	≤ 1 ms ⁵⁾
Response time Q/ on Pin 2	700 µs … 850 µs ⁵⁾ ⁶⁾
Switching frequency	500 Hz ⁷⁾
Switching frequency Q / to pin 2	≤ 500 Hz ⁸⁾
Connection type	Cable with M12 male connector, 4-pin, 120 mm ⁹⁾
Cable material	PVC
Circuit protection	A ¹⁰⁾ B ¹¹⁾ C ¹²⁾
Protection class	III
Weight	80 g
Housing material	Plastic, VISTAL®
Optics material	Plastic, PMMA
Enclosure rating	IP66 IP67 IP69K
Ambient operating temperature	–10 °C … +50 °C
Ambient operating temperature extended	–30 °C … +55 °C ¹³⁾ ¹⁴⁾
Ambient temperature, storage	–30 °C … +70 °C
UL File No.	NRKH.E181493
Repeatability Q/ on Pin 2:	150 µs ⁶⁾

¹⁾ Limit values when operated in short-circuit protected network: max. 8 A.
²⁾ May not exceed or fall below U_v tolerances.
³⁾ Without load.
⁴⁾ Q = light switching.
⁵⁾ Signal transit time with resistive load.
⁶⁾ Valid for Q on Pin2, if configured with software.
⁷⁾ With light/dark ratio 1:1.
⁸⁾ With light / dark ratio 1:1, valid for Q on Pin2, if configured with software.
⁹⁾ Do not bend below 0 °C.
¹⁰⁾ A = V_S connections reverse-polarity protected.
¹¹⁾ B = inputs and output reverse-polarity protected.
¹²⁾ C = interference suppression.
¹³⁾ As of T_a = 50 °C, a max. supply voltage V_max. = 24 V and a max. load current I_max. = 50 mA is permitted.
¹⁴⁾ Operation below Tu –10 °C is possible if the sensor is already switched on at Tu > –10 °C, then cools down, and the supply voltage is subsequently not switched off. Switching on below Tu –10 °C is not permissible.

Communication interface

Communication interface	IO-Link V1.1
Communication Interface detail	COM2 (38,4 kBaud)
Cycle time	2.3 ms
Process data length	16 Bit
Process data structure	Bit 0 = switching signal Q_L1 Bit 1 = switching signal Q_L2 Bit 2 … 15 = empty
VendorID	26
DeviceID HEX	0x80010C
DeviceID DEC	8388876

Smart Task

Smart Task name

Base logics

Logic function

Direct

AND

WINDOW

Hysteresis

Timer function

Deactivated

On delay

Off delay

ON and OFF delay

Impulse (one shot)

Inverter

Yes

Switching frequency

SIO Direct: 500 Hz ¹⁾

SIO Logic: 350 Hz ²⁾

IOL: 300 Hz ³⁾

Response time

SIO Direct: 700 µs … 850 µs ¹⁾

SIO Logic: 1150 µs … 1300 µs ²⁾

IOL: 1200 µs … 1600 µs ³⁾

Repeatability

SIO Direct: 150 µs ¹⁾

SIO Logic: 150 µs ²⁾

IOL: 400 µs ³⁾

Switching signal
Switching signal Q_L1	Output type (dependant on the adjusted threshold)
Switching signal Q_L2	Output type (dependant on the adjusted threshold)

¹⁾ SIO Direct: sensor operation in standard I/O mode without IO-Link communication and without using internal sensor logic or time parameters (set to “direct”/”deactivated”).
²⁾ SIO Logic: Sensor operation in standard I/O mode without IO-Link communication. Sensor-internal logic or timing parameters plus Automation Functions used.
³⁾ IOL: Sensor operation with full IO-Link communication and usage of logic, timing and Automation Function parameters.

Classifications