-
Features
Application Normal industrial environment System part Set Resolution 30 mm Scanning range 30 m Protective field height 1,800 mm Response time 13 ms (Uncoded)
24 ms (code 1 or code 2)
Synchronization Optical synchronisation Integrated laser alignment aid ✔ End cap with integrated LED ✔ Items supplied Sender
Receiver
FlexFix brackets
Test rod with diameter corresponding to the resolution of the safety light curtain
Safety instruction
Mounting instructions
Operating instructions for download
-
Safety-related parameters
Type Type 4 (IEC 61496-1) Safety integrity level SIL3 (IEC 61508) Category Category 4 (ISO 13849-1) Performance level PL e (ISO 13849-1) PFHD (mean probability of a dangerous failure per hour) Single device 15.3 x 10-9 Cascade with one guest 30.5 x 10-9 Cascade with two guest devices 45.6 x 10-9 TM (mission time) 20 years (ISO 13849-1) Safe state in the event of a fault At least one OSSD is in the OFF state.
-
Functions
Protective operation ✔ Automatic calibration of the protective field width ✔ Beam coding ✔ Restart interlock ✔ External device monitoring (EDM) ✔ Cascading ✔ Smart presence detection ✔ Reduced resolution ✔ Dynamic protective field width during operation ✔ Differentiation between person and material 2-signal muting ✔
-
Interfaces
System connection Depending on system plug (M12 male connector, 5-pin or 8-pin) Extension connection Depending on system plug (without extension connection or with M12 female connector, 5-pin) Configuration method DIP switch on system plug Display elements LEDs Display of the synchronization status of the upper and lower beams ✔ LEDs ✔ Application diagnostic output (ADO) ✔ IO-Link ✔ Near Field Communication (NFC) ✔
-
Electrical data
Protection class III (IEC 61140) Supply voltage VS 24 V DC (19.2 V … 28.8 V) Ripple ≤ 10 % Output signal switching devices (OSSDs) Type of output 2 PNP semiconductors, short-circuit protected, cross-circuit monitored 1) ON state, switching voltage HIGH 24 V DC (VS – 2.25 V DC … VS) OFF state, switching voltage LOW ≤ 2 V DC Current-carrying capacity per OSSD ≤ 500 mA Application diagnostic output (ADO) Type of output PNP semiconductor, short-circuit protected 1) Output voltage HIGH (active) ≥ Vs – 3 V Output voltage LOW (deactivated) High resistance Output current HIGH (active) ≤ 100 mA - 1) Applies to the voltage range between –30 V and +30 V.
-
Mechanical data
Dimensions See dimensional drawing Housing material Aluminum extruded profile
-
Ambient data
Enclosure rating IP65 (IEC 60529)
IP67 (IEC 60529)
Ambient operating temperature –30 °C … +55 °C Storage temperature –30 °C … +70 °C Air humidity 15 % … 95 %, Non-condensing Vibration resistance 5 g, 10 Hz … 55 Hz (IEC 60068-2-6) Shock resistance 10 g, 16 ms (IEC 60068-2-27)
-
Other information
Wave length 850 nm Type of light Near-infrared (NIR), invisible Integrated laser alignment aid ✔ Laser class 1 Wave length 650 nm Type of light Visible red light
-
Classifications
eCl@ss 5.0 27272704 eCl@ss 5.1.4 27272704 eCl@ss 6.0 27272704 eCl@ss 6.2 27272704 eCl@ss 7.0 27272704 eCl@ss 8.0 27272704 eCl@ss 8.1 27272704 eCl@ss 9.0 27272704 eCl@ss 10.0 27272704 eCl@ss 11.0 27272704 eCl@ss 12.0 27272704 ETIM 5.0 EC002549 ETIM 6.0 EC002549 ETIM 7.0 EC002549 ETIM 8.0 EC002549 UNSPSC 16.0901 46171620