-
Features
Application Explosive areas Ex-approvals ATEX for gas: II 3G Ex ec op is IIC T4 Gc
ATEX for dust: II 3D Ex tc IIIC T135°C Dc
System part Receiver Resolution 30 mm Scanning range 30 m Protective field height 1,950 mm Response time 14 ms (Uncoded)
25 ms (code 1 or code 2)
No blind zones Yes Synchronization Optical synchronisation Items supplied Receiver
Test rod with diameter corresponding to the resolution of the safety light curtain
“Notes for explosion protection” label(s)
Safety instruction
Mounting instructions
Operating instructions for download
-
Safety-related parameters
Type Type 4 (IEC 61496-1) Safety integrity level SIL3 (IEC 61508) Category Category 4 (ISO 13849-1) Performance level PL e (ISO 13849-1) PFHD (mean probability of a dangerous failure per hour) Single device 15.3 x 10-9 Cascade with one guest 30.5 x 10-9 Cascade with two guest devices 45.6 x 10-9 TM (mission time) 20 years (ISO 13849-1) Safe state in the event of a fault At least one OSSD is in the OFF state.
-
Functions
Protective operation ✔ Automatic calibration of the protective field width ✔ Beam coding ✔ Restart interlock ✔ External device monitoring (EDM) ✔ Cascading ✔ Smart presence detection ✔ Reduced resolution ✔ Dynamic protective field width during operation ✔ Differentiation between person and material 2-signal muting ✔
-
Interfaces
System connection Depending on system plug (M12 male connector, 5-pin or 8-pin) Extension connection Depending on system plug (without extension connection or with M12 female connector, 5-pin) Configuration method DIP switch on system plug Display elements LEDs Display of the synchronization status of the upper and lower beams ✔ Application diagnostic output (ADO) ✔ IO-Link ✔ Near Field Communication (NFC) ✔
-
Electrical data
Protection class III (IEC 61140) Supply voltage VS 24 V DC (19.2 V … 28.8 V) Ripple ≤ 10 % Power consumption typical 3.96 W (DC) Output signal switching devices (OSSDs) Type of output 2 PNP semiconductors, short-circuit protected, cross-circuit monitored 1) ON state, switching voltage HIGH 24 V DC (VS – 2.25 V DC … VS) OFF state, switching voltage LOW ≤ 2 V DC Current-carrying capacity per OSSD ≤ 500 mA Application diagnostic output (ADO) Type of output PNP semiconductor, short-circuit protected 1) Output voltage HIGH (active) ≥ Vs – 3 V Output voltage LOW (deactivated) High resistance Output current HIGH (active) ≤ 100 mA - 1) Applies to the voltage range between –30 V and +30 V.
-
Mechanical data
Dimensions See dimensional drawing Housing material Aluminum extruded profile
-
Ambient data
Enclosure rating IP65 (IEC 60529) Ambient operating temperature 0 °C … +55 °C Storage temperature –30 °C … +70 °C Air humidity 15 % … 95 %, Non-condensing Vibration resistance 5 g, 10 Hz … 55 Hz (IEC 60068-2-6) Shock resistance 10 g, 16 ms (IEC 60068-2-27)
-
Classifications
eCl@ss 5.0 27272704 eCl@ss 5.1.4 27272704 eCl@ss 6.0 27272704 eCl@ss 6.2 27272704 eCl@ss 7.0 27272704 eCl@ss 8.0 27272704 eCl@ss 8.1 27272704 eCl@ss 9.0 27272704 eCl@ss 10.0 27272704 eCl@ss 11.0 27272704 eCl@ss 12.0 27272704 ETIM 5.0 EC002549 ETIM 6.0 EC002549 ETIM 7.0 EC002549 ETIM 8.0 EC002549 UNSPSC 16.0901 46171620