TIM771S-2174104

Safety laser scanners
TiM-S / TiM

sản phẩm chính hãng, MỚI 100% CHƯA SỬ DỤNG
SẢN PHẨM LUÔN ĐƯỢC KIỂM TRA TRƯỚC KHI XUẤT KHO
BẢO HÀNH 12 THÁNG ĐỐI VỚI LỖI CỦA NHÀ SẢN XUẤT / HOẶC THEO CHÍNH SÁCH CỦA SẢN PHẨM DO TRƯỜNG THỊNH PHÂN PHỐI
HỖ TRỢ KỸ THUẬT 24/7
MIỄN PHÍ GIAO HÀNG ĐỐI VỚI CÁC ĐƠN HÀNG TỪ 8,000,000VNĐ

Liên hệ:

Mã sản phẩm: TIM771S-2174104 Danh mục: Safety laser scanners Thẻ: 1105052, TIM771S-2174104

Mô tả

Show all

Hide all

Features

System part

Sensor

Measurement principle

HDDM

Application

Indoor

Light source

Infrared (850 nm)

Laser class

1 (IEC 60825-1:2014, EN 60825-1:2014)

Aperture angle
Horizontal	270°

Scanning frequency

15 Hz

Angular resolution

0.33°

Scan field flatness

± 1.5°

Working range

0.05 m … 25 m (> 90% remission)

Safety-related working range

0.05 m … 5 m (At 5% remission)

Blind zone

0 m … 0.05 m

Scanning range
At 10% remission	8 m

Mechanics/electronics

Connection type	1 x “Ethernet” connection, 4-pin M12 female connector 1 x connection “Power”, 12-pin, M12 male connector 1 x Micro USB female connector, type B
Supply voltage	9 V DC … 28 V DC
Power consumption	Typ. 4 W, 16 W with 4 max. loaded digital outputs
Output current	≤ 100 mA
Housing color	Yellow
Enclosure rating	IP67, applies only when the plastic cover of the “Aux interface” is closed (IEC 60529:1989+AMD1:1999+AMD2:2013)
Protection class	III (IEC 61140:2016-1)
Weight	250 g, without connecting cables
Dimensions (L x W x H)	60 mm x 60 mm x 86 mm

Safety-related parameters

Category	B (EN ISO 13849-1:2015)
Performance level	PL b (EN ISO 13849-1:2015)
Performance class SRS/SRSS	B (IEC TS 62998-1:2019)
T_M (mission time)	20 years (EN ISO 13849-1:2015)
Conformities	EN ISO 13849-1:2015, ANSI/ITSDF B56.5:2012, IEC TS 62998-1:2019, EN ISO 13482:2014, EN ISO 13855:2010
MTBF	> 100 years
MTTF_D	100 years, at 25 °C ambient temperature (EN ISO 13849-1:2015)

Performance

Response time	1 scan, typ. 67 ms 2 scans, ≤ 134 ms ¹⁾
Detectable object shape	Almost any
Systematic error	± 60 mm ²⁾
Statistical error	< 20 mm ²⁾ < 10 mm ³⁾
Safety-related statistical error	< 60 mm (4,4 σ)
Integrated application	Protective field evaluation with flexible fields Output of measurement data
Protective field tolerance	100 mm, 0.66° (DIN CLC/TS 62046:2009, 5% remission)
Number of field sets	16 field triples (48 protective fields)
Simultaneous evaluation cases	3 simultaneous protective fields (per field set)

¹⁾ At +45° to +225° of the working range; max. 150 ms at –45° to +45° of the working range.
²⁾ Typical value at 90% remission up to maximum scanning range; real value depends on ambient conditions.
³⁾ Typical value at 10% remission up to 6 m scanning range; real value depends on ambient conditions.

Interfaces

Ethernet

✔ , TCP/IP

USB	✔
Remark	Micro USB
Function	Parameterization

Digital inputs

4 (PNP, for field set switching)

Digital outputs

3 (PNP, to display a protective field violation, additional 1 x “Device Ready”)

Delay time

67 ms … 30,000 ms (configurable)

Dwell time

67 ms … 600,052 ms (configurable)

Optical indicators

2 LEDs (ON, “device ready”)

Ambient data

Object remission

≥ 5 % (reflectors) ¹⁾

Electromagnetic compatibility (EMC)
Emitted radiation	Residential area (IEC 61000-6-3:2006+AMD1:2010)
Electromagnetic immunity	Industrial environment (IEC 61000-6-2:2005)

Vibration resistance
Sine resonance scan	10 Hz … 1,000 Hz ²⁾
Sine test	10 Hz … 500 Hz, 5 g, 10 frequency cycles ²⁾
Noise test	10 Hz … 250 Hz, 4.24 g RMS, 5 h ³⁾

Shock resistance

50 g, 11 ms, ± 3 single shocks/axis ⁴⁾

25 g, 6 ms, ± 1,000 continuous shocks/axis ⁴⁾

50 g, 3 ms, ± 5,000 continuous shocks/axis ⁴⁾

Ambient operating temperature

–25 °C … +50 °C ⁵⁾

Storage temperature

–40 °C … +75 °C ⁵⁾

Switch-on temperature

–10 °C … +50 °C

Temperature change

–25 °C … +50 °C, 10 cycles ⁶⁾

Damp heat

+25 °C … +55 °C, 95 % RH, 6 cycles ⁷⁾

Permissible relative humidity
Operation	< 80 %, Non-condensing (EN 60068-2-30:2005)
Storage	≤ 90 %, Non-condensing (EN 60068-2-30:2005)

Ambient light immunity

80,000 lx

3,000 lx, With direct light

¹⁾ When using reflectors, observe notes in the operating instructions.
²⁾ IEC 60068-2-6:2007.
³⁾ IEC 60068-2-64:2008.
⁴⁾ IEC 60068-2-27:2008.
⁵⁾ IEC 60068-2-14:2009.
⁶⁾ EN 60068-2-14:2009.
⁷⁾ EN 60068-2-30:2005.

General notes

Note on use

The TiM771S is a safety-related sensor that is suitable for use in the following applications: Hazardous area, hazardous point, and access protection as well as mobile hazardous area protection (protection of automated guided vehicles and mobile platforms). The sensor must only ever be used within the limits of the prescribed and specified technical data and operating conditions.

Classifications

eCl@ss 5.0	27270990
eCl@ss 5.1.4	27270990
eCl@ss 6.0	27270913
eCl@ss 6.2	27270913
eCl@ss 7.0	27270913
eCl@ss 8.0	27270913
eCl@ss 8.1	27270913
eCl@ss 9.0	27270913
eCl@ss 10.0	27270913
eCl@ss 11.0	27270913
eCl@ss 12.0	27270913
ETIM 5.0	EC002550
ETIM 6.0	EC002550
ETIM 7.0	EC002550
ETIM 8.0	EC002550
UNSPSC 16.0901	41111615