Key Commercial Data
Orderkey | 1521258 |
---|---|
Packing unit | 1 pc |
Catalog page | Page 236 (C-4-2013) |
GTIN | 4017918968601 |
Weight per Piece (excluding packing) | 48.000 g |
Custom tariff number | 85366990 |
Country of origin | DE (Germany) |
Dimensions
Diameter housing | 20 mm |
---|---|
Length | 62 mm |
External cable diameter | 4 mm … 6 mm |
Stripping length of the sheath | 35 mm |
Stripping length of the individual wire | 5 mm |
Ambient conditions
Ambient temperature (operation) | -40 °C … 85 °C (Plug / socket) |
---|---|
Degree of protection | IP67 |
General
Note | This product corresponds to the PROFINET Cabling and Interconnection Technology Guideline for PROFINET regulations, version 2.00, order no: 2.252, Chapter 8.2 Connectors for Outside Environment (Balanced cabling) |
---|---|
Rated current at 40°C | 4 A |
Rated voltage | 60 V DC |
48 V AC | |
Number of positions | 4 |
Insulation resistance | ≥ 100 MΩ |
Coding | D – data |
Standards/regulations | M12 connector IEC 61076-2-101 |
Signal type/category | Ethernet/PROFINET CAT5 (on the basis of IEC 11801), 100 Mbps |
Status display | No |
Overvoltage category | II |
Degree of pollution | 3 |
Connection method | Screw connection |
Conductor cross section | 0.25 mm² … 0.75 mm² (without ferrule) |
0.14 mm² … 0.75 mm² (with ferrule) | |
0.25 mm² … 0.75 mm² (solid) | |
Conductor cross section AWG | 24 … 18 (without ferrule) |
26 … 20 (with ferrule) | |
Insertion/withdrawal cycles | ≥ 100 |
Torque | 0.4 Nm (M12 knurl) |
0.2 Nm (Screw terminal blocks) | |
0.8 Nm … 1 Nm (Pressure nut with coupling sleeve) | |
Tightening torque | Screw plug insert with sleeve housing as far it will go |
Assembly instructions | The wires can be connected both with ferrules and without ferrules |
Material
Flammability rating according to UL 94 | HB |
---|---|
Contact material | CuZn |
Contact surface material | Au |
Contact carrier material | PA |
Material of grip body | Zinc die-cast, nickel-plated |
Material, knurls | Zinc die-cast, nickel-plated |
Sealing material | NBR |
Standards and Regulations
Standard designation | M12 connector |
---|---|
Standards/regulations | IEC 61076-2-101 |
Connection in acc. with standard | CUL |
Flammability rating according to UL 94 | HB |