Key Commercial Data
Orderkey | 1408992 |
---|---|
Packing unit | 1 pc |
Catalog page | Page 21 (C-2-2017) |
GTIN | 4046356885126 |
Weight per Piece (excluding packing) | 27.150 g |
Custom tariff number | 85366990 |
Country of origin | DE (Germany) |
Dimensions
Diameter housing | 20.2 mm |
---|---|
Length | 44 mm |
External cable diameter | 8 mm … 10 mm |
Stripping length of the sheath | 20 mm |
Stripping length of the individual wire | 5 mm |
Ambient conditions
Ambient temperature (operation) | -40 °C … 85 °C (Plug / socket) |
---|---|
Degree of protection | IP67 |
General
Note | Strip 22 mm off the cable sheath, shorten conductor for the fifth position by 10 mm. Strip 7 mm off the conductor insulation, crimp the ferrule, then shorten this to 5 mm. Length of conductors with shortened ferrule: 20 mm. Connect conductors and tighten the mounting screws with 0.2 Nm. |
---|---|
Rated current at 40°C | 8 A (Contact 5: 2 A) |
when using 1.5 mm² conductors | |
Rated voltage | 60 V DC |
48 V AC | |
Number of positions | 5 |
Color handle area | black |
Insulation resistance | > 10 GΩ |
Coding | A – standard |
Standards/regulations | M12 connector IEC 61076-2-101 |
Status display | No |
Overvoltage category | II |
Degree of pollution | 3 |
Connection method | Screw connection |
Conductor cross section | 0.75 mm² … 1.5 mm² (without ferrule) |
0.75 mm² … 1.5 mm² (with ferrule) | |
0.75 mm² … 1.5 mm² (solid) | |
Conductor cross section AWG | 18 … 16 (without ferrule) |
16 … 18 (with ferrule) | |
Insertion/withdrawal cycles | > 100 |
Torque | 0.4 Nm (M12 knurl) |
1.5 Nm … 2 Nm (Pressure screw with sleeve housing) | |
0.4 Nm (Screw plug insert with sleeve housing as far it will go) | |
0.2 Nm (Screw terminal blocks) | |
Assembly instructions | The wires can be connected both with ferrules and without ferrules |
The connector pin assignment can be rotated 90° to the cable outlet |
Material
Flammability rating according to UL 94 | V0 |
---|---|
Contact material | CuZn |
Contact surface material | Ni/Au |
Contact carrier material | PA |
Material of grip body | PA |
Material, knurls | Zinc die-cast, nickel-plated |
Sealing material | NBR (Cable clamping) |
Standards and Regulations
Standard designation | M12 connector |
---|---|
Standards/regulations | IEC 61076-2-101 |
Flammability rating according to UL 94 | V0 |