Key Commercial Data
Orderkey | 1411592 |
---|---|
Packing unit | 1 pc |
Note | Made to Order (non-returnable) |
Catalog page | Page 45 (C-2-2017) |
GTIN | 4046356935869 |
Weight per Piece (excluding packing) | 26.600 g |
Custom tariff number | 85366990 |
Country of origin | DE (Germany) |
Ambient conditions
Ambient temperature (operation) | -25 °C … 85 °C (Plug / socket) |
---|---|
Degree of protection | IP67 |
General
Note | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
---|---|
This product corresponds to the PROFINET Cabling and Interconnection Technology Guideline for PROFINET regulations, version 2.00, order no: 2.252, Chapter 8.2 Connectors for Outside Environment (Balanced cabling) | |
Rated current at 40°C | 4 A |
Rated voltage | 250 V |
Rated surge voltage | 2.5 kV |
Number of positions | 4 |
Insulation resistance | ≥ 100 MΩ |
Coding | D – data |
Standards/regulations | M12 connector IEC 61076-2-101 |
Status display | No |
Overvoltage category | II |
Degree of pollution | 3 |
Connection method | Individual wires |
Insertion/withdrawal cycles | > 100 |
Torque | 0.8 Nm … 1.3 Nm (Installation-side) |
Mounting type | Rear mounting M16 x 1.5 With flat nut |
Assembly instructions | Tightening limitation |
Material
Flammability rating according to UL 94 | V0 |
---|---|
Contact material | CuZn |
Contact surface material | Au |
Contact carrier material | PA 6.6 |
Material, knurls | Zinc die-cast, nickel-plated |
Sealing material | FKM |
Cable
Cable type | TPE litz wire |
---|---|
Conductor cross section | 0.34 mm² |
AWG signal line | 22 |
Conductor structure signal line | 7x 0.25 mm |
Core diameter including insulation | 1.2 mm ±0.07 mm |
Thickness, insulation | 0.21 mm |
Wire colors | Yellow, orange, white, blue |
Material conductor insulation | TPE |
Conductor material | Tin-plated Cu litz wires |
Standards/specifications | M12 connector IEC 61076-2-101 |
Insulation resistance | ≥ 20 MΩ*km |
Conductor resistance | ≤ 57.6 mΩ/m |
Transmission characteristics (category) | CAT5 (IEC 11801:2002) |
Nominal voltage, cable | 300 V |
Test voltage, cable | 2000 V AC |
Ambient temperature (operation) | -40 °C … 85 °C (cable, fixed installation) |
-25 °C … 85 °C (cable, flexible installation) |