Key Commercial Data
| Orderkey | 1437245 |
|---|---|
| Packing unit | 1 pc |
| Note | Made to Order (non-returnable) |
| Catalog page | Page 271 (C-2-2017) |
| GTIN | 4046356455619 |
| Weight per Piece (excluding packing) | 444.100 g |
| Custom tariff number | 85444290 |
| Country of origin | PL (Poland) |
General
| Rated voltage | 24 V DC |
|---|---|
| Max. operating voltage Umax | 30 V DC |
| Current carrying capacity per I/O signal | 2 A |
| Current carrying capacity per slot | 4 A |
| Total rated current | 12 A |
| Number of positions | 4 |
| Number of slots | 8 |
| Sensor/actuator connection system | M12-SPEEDCON-socket |
Ambient conditions
| Degree of protection | IP54 (with sealed mounting holes) |
|---|---|
| Ambient temperature (operation) | -30 °C … 80 °C |
| Ambient temperature (storage/transport) | -30 °C … 90 °C |
| Ambient temperature (operation) | -40 °C … 90 °C (for fixed installation) |
| -5 °C … 80 °C (for flexible installation) |
Master cable data/connection data
| Connection method | Rear master cable connection |
|---|---|
| Length of cable | 1.5 m |
| Signal line cross section | 8x 0.34 mm² |
| AWG signal line | 22 |
| Conductor structure signal line | 42x 0.10 mm |
| Power supply cross section | 3x 0.75 mm² |
| AWG power supply | 19 |
| Conductor structure, voltage supply | 96x 0.10 mm |
| Tightening torque slot sensor/actuator cable | 0.4 Nm |
| Tightening torque of mounting screw for fixing the housing | 0.5 Nm |
Insulation material
| Housing material | PBT |
|---|---|
| Material of the moulding mass | PUR |
| Contact material | Cu alloy |
| Contact surface material | gold-plated |
| Contact carrier material | PA |
| Material of threaded sleeve | Zinc die-cast |
| Material of threaded sleeve surface | Nickel-plated |
| O-ring material | NBR |
| Sealing material | CR (flat gasket on the back) |




