Key Commercial Data
Orderkey | 1146339 |
---|---|
Packing unit | 1 |
GTIN | 4063151137373 |
Custom tariff number | 85444290 |
General
Rated voltage | 24 V DC |
---|---|
Max. operating voltage Umax | 30 V DC |
Current carrying capacity per I/O signal | 2 A |
Current carrying capacity per slot | 4 A |
Total rated current | 12 A |
Number of positions | 5 |
Number of slots | 6 |
Note | NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. |
Unused slots are to be sealed off prior to commissioning. Suitable sealing elements are to be found under “Accessories”. |
Ambient conditions
Degree of protection | IP65 |
---|---|
IP67 | |
Ambient temperature (operation) | -25 °C … 80 °C |
-40 °C … 90 °C (for fixed installation) | |
-5 °C … 80 °C (for flexible installation) |
Master cable connection data
Connection method | Fixed connection |
---|---|
Length of cable | 20 m |
Tightening torque slot sensor/actuator cable | 0.4 Nm |
Tightening torque of mounting screw for fixing the housing | 0.5 Nm |
Insulation material
Housing material | PBT |
---|---|
Material of the moulding mass | PUR |
Contact material | Cu alloy |
Contact surface material | gold-plated |
Contact carrier material | PA |
Material of threaded sleeve | PBT |
O-ring material | NBR |
Pin assignment
Slot/position = Wire color or connection | 1 / 4 (A) = WH |
---|---|
1 / 2 (B) = GY/PK | |
2 / 4 (A) = GN | |
2 / 2 (B) = RD/BU | |
3 / 4 (A) = YE | |
3 / 2 (B) = WH/GN | |
4 / 4 (A) = GY | |
4 / 2 (B) = BN/GN | |
5 / 4 (A) = PK | |
5 / 2 (B) = WH/YE | |
6 / 4 (A) = RD | |
6 / 2 (B) = YE/BN | |
1-6 / 1 (+ 24 V) = BN | |
1-6 / 3 (0 V) = BU | |
1-6 / 5 (PE) = GN/YE |
Cable
Cable type | PUR/PVC black |
---|---|
Cable type (abbreviation) | PUR |
Cable abbreviation | LiYY11Y-HF |
UL AWM style | 20549 |
Conductor cross section | 12x 0.5 mm² (Signal line) |
3x 1 mm² (power line) | |
AWG signal line | 20 |
AWG power supply | 17 |
Conductor structure signal line | 28x 0.15 mm |
Conductor structure, voltage supply | 56x 0.15 mm |
Core diameter including insulation | 1.5 mm ±0.1 mm (Signal line) |
2.1 mm ±0.1 mm (power line) | |
Thickness, insulation | ≥ 0.15 mm (Inner sheath) |
≥ 0.76 mm (Outer cable sheath) | |
Wire colors | brown, blue, green/yellow, white, green, yellow, gray, pink, red, gray/pink, red/blue, white/green, brown/green, white/yellow, yellow/brown |
Overall twist | Wires twisted in layers |
External sheath, color | black RAL 9005 |
External cable diameter D | 9.4 mm ±0.2 mm |
Minimum bending radius, fixed installation | 7.5 x D |
Minimum bending radius, flexible installation | 10 x D |
Number of bending cycles | 1500000 |
Bending radius | 94 mm |
Traversing path | 2 m |
Traversing rate | 2 m/s |
Cable weight | 150.9 kg/km |
Outer sheath, material | PUR |
Material, inner sheath | PVC |
Material conductor insulation | PVC |
Conductor material | Bare Cu litz wires |
Nominal voltage, cable | 300 V |
Test voltage, cable | 2000 V |
Special properties | Silicone-free |
Flame resistance | DIN EN 50265 |
Resistance to oil | according to VDE 0472 Part 803 |
Other resistance | Highly resistant to acids, alkaline solutions and solvents |
Ambient temperature (operation) | -40 °C … 90 °C (cable, fixed installation) |
-5 °C … 80 °C (cable, flexible installation) |