Key Commercial Data
Orderkey | 2903659 |
---|---|
Packing unit | 10 pc |
Minimum order quantity | 10 pc |
Catalog page | Page 314 (C-5-2017) |
GTIN | 4046356758123 |
Weight per Piece (excluding packing) | 35.230 g |
Custom tariff number | 85364190 |
Country of origin | PL (Poland) |
Ambient conditions
Ambient temperature (operation) | -40 °C … 70 °C |
---|---|
Ambient temperature (storage/transport) | -40 °C … 85 °C |
Degree of protection | RT I |
Coil side
Nominal input voltage UN | 12 V DC |
---|---|
Input voltage range in reference to UN | see diagram |
Typical input current at UN | 78 mA |
Typical response time | 13 ms |
Typical release time | 14 ms |
Protective circuit | Damping diode |
Status display | Yellow LED |
Power dissipation for nominal condition | 0.94 W |
Contact side
Contact type | 2 PDT |
---|---|
Type of switch contact | Single contact |
Contact material | AgNi |
Maximum switching voltage | 250 V AC/DC |
Minimum switching voltage | 5 V (At 24 mA) |
Min. switching current | 5 mA (at 24 V) |
Maximum inrush current | 30 A (20 ms, N/O contact) |
Limiting continuous current | 12 A |
Interrupting rating (ohmic load) max. | 288 W (at 24 V DC) |
124 W (at 48 V DC) | |
108 W (at 60 V DC) | |
52 W (at 110 V DC) | |
48 W (at 220 V DC) | |
3000 VA (for 250 V AC) | |
Switching capacity min. | 0.12 W |
Motor load according to UL 508 | 1/2 HP, 240 V AC |
General
Test voltage relay winding/relay contact | 2.5 kVrms(50 Hz, 1 min.) |
---|---|
Test voltage relay contact/relay contact | 2.5 kVrms(50 Hz, 1 min.) |
Test voltage PDT/PDT | 2.5 kVrms(50 Hz, 1 min.) |
Operating mode | 100% operating factor |
Degree of protection | RT I |
Mechanical service life | approx. 2x 107cycles |
Service life, electrical | see diagram |
Mounting position | any |
Net weight (SAP) | 35.23 g |