Key Commercial Data
| Orderkey | 2866802 |
|---|---|
| Packing unit | 1 pc |
| Catalog page | Page 211 (C-4-2017) |
| GTIN | 4046356152877 |
| Weight per Piece (excluding packing) | 2,954.000 g |
| Custom tariff number | 85044030 |
| Country of origin | TH (Thailand) |
Dimensions
| Width | 96 mm |
|---|---|
| Height | 130 mm |
| Depth | 176 mm |
| Width with alternative assembly | 176 mm |
| Height with alternative assembly | 130 mm |
| Depth with alternative assembly | 99 mm |
Ambient conditions
| Degree of protection | IP20 |
|---|---|
| Ambient temperature (operation) | -25 °C … 70 °C (> 60 °C Derating: 2.5 %/K) |
| Ambient temperature (start-up type tested) | -40 °C |
| Ambient temperature (storage/transport) | -40 °C … 85 °C |
| Max. permissible relative humidity (operation) | ≤ 95 % (at 25 °C, non-condensing) |
| Climatic class | 3K3 (in acc. with EN 60721) |
| Degree of pollution | 2 |
| Installation height | 4000 m |
Input data
| Nominal input voltage range | 3x 400 V AC … 500 V AC |
|---|---|
| Input voltage range | 3x 320 V AC … 575 V AC |
| 2x 360 V AC … 575 V AC | |
| 450 V DC … 800 V DC | |
| AC frequency range | 45 Hz … 65 Hz |
| Frequency range DC | 0 Hz |
| Discharge current to PE | < 3.5 mA |
| Current consumption | 3x 2.1 A (400 V AC) |
| 3x 1.7 A (500 V AC) | |
| 1.7 A (600 V DC) | |
| Nominal power consumption | 1342 VA |
| Inrush surge current | < 15 A |
| Mains buffering | > 25 ms (400 V AC) |
| > 35 ms (500 V AC) | |
| Choice of suitable circuit breakers | 6 A … 16 A (AC: Characteristics B, C, D, K) |
| Type of protection | Transient surge protection |
| Protective circuit/component | Varistor, gas-filled surge arrester |
Output data
| Nominal output voltage | 24 V DC ±1 % |
|---|---|
| Setting range of the output voltage (USet) | 18 V DC … 29.5 V DC (> 24 V DC, constant capacity restricted) |
| Nominal output current (IN) | 40 A (-25 °C … 60 °C, UOUT= 24 V DC) |
| POWER BOOST (IBoost) | 45 A (-25°C … 40°C permanent, UOUT= 24 V DC ) |
| Selective Fuse Breaking (ISFB) | 215 A (12 ms) |
| Derating | 60 °C … 70 °C (2.5%/K) |
| Connection in parallel | Yes, for redundancy and increased capacity |
| Connection in series | yes |
| Feedback resistance | max. 35 V DC |
| Output overvoltage protection | < 35 V DC |
| Control deviation | < 1 % (change in load, static 10 % … 90 %) |
| < 3 % (change in load, dynamic 10 % … 90 %) | |
| < 0.1 % (change in input voltage ±10 %) | |
| Residual ripple | < 40 mVPP(with nominal values) |
| Output power | 960 W |
| Typical response time | < 0.5 s |
| Peak switching voltages nominal load | < 5 mVPP(at nominal values, 20 MHz) |
| Maximum power dissipation in no-load condition | 18 W |
| Power loss nominal load max. | 63 W |
General
| Net weight | 2.5 kg |
|---|---|
| Operating voltage display | Green LED |
| Efficiency | > 94 % (at 400 V AC and nominal values) |
| Insulation voltage input/output | 4 kV AC (type test) |
| 2 kV AC (routine test) | |
| Insulation voltage input / PE | 3.5 kV AC (type test) |
| 2 kV AC (routine test) | |
| Insulation voltage output / PE | 500 V DC (routine test) |
| Protection class | I |
| Degree of protection | IP20 |
| MTBF (IEC 61709, SN 29500) | > 880000 h (25 °C) |
| > 500000 h (40 °C) | |
| > 216000 s (60 °C) | |
| Mounting position | horizontal DIN rail NS 35, EN 60715 |
| Assembly instructions | alignable: PN≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm vertically alignable: PN<50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom |
Sản phẩm tương tự
Industrial Relays
Industrial Relays
Industrial Relays
Industrial Relays
Industrial Relays
REL-MR-110DC/21-21AU/MS 1013727 PHOENIX CONTACT Single relay
Industrial Relays
EMG 22-REL/KSR-G 24/TRN24/SO62 2944407 PHOENIX CONTACT Relay Module
Industrial Relays
Industrial Relays
