PSR-MC42-2NO-1DO-24DC-SP 2702902 PHOENIX CONTACT Safety relay with IO-Link for emergency stop, safety doors ..

Safety relay with IO-Link for emergency stop, safety doors and light grids, up to SILCL 3, Cat. 4, PL e, 2 sensor circuits, automatic or manual, monitored start, 2 enabling current paths, 1 signal output, U

sản phẩm chính hãng, MỚI 100% CHƯA SỬ DỤNG
SẢN PHẨM LUÔN ĐƯỢC KIỂM TRA TRƯỚC KHI XUẤT KHO
BẢO HÀNH 12 THÁNG ĐỐI VỚI LỖI CỦA NHÀ SẢN XUẤT / HOẶC THEO CHÍNH SÁCH CỦA SẢN PHẨM DO TRƯỜNG THỊNH PHÂN PHỐI
HỖ TRỢ KỸ THUẬT 24/7
MIỄN PHÍ GIAO HÀNG ĐỐI VỚI CÁC ĐƠN HÀNG TỪ 8,000,000VNĐ

Liên hệ:

SKU: 2702902 Danh mục: Safety Thẻ: 2702902, PHOENIX_CONTACT, PSR-MC42-2NO-1DO-24DC-SP

Mô tả

Key Commercial Data

Orderkey	2702902
Packing unit	1 pc
Catalog page	Page 224 (C-6-2019)
GTIN	4055626458564
Weight per Piece (excluding packing)	180.000 g
Custom tariff number	85371098
Country of origin	DE (Germany)

Drawings
Dimensions
Power supply
Digital inputs
Relay outputs: enabling current path
Times
Connection capacity
Standards and Regulations
Classifications

Note
Ambient conditions
Supply of the IO-Link ports
IO-Link inputs
Alarm outputs
General
Safety-related characteristic data
Environmental Product Compliance

Drawings


Block diagram		Circuit diagram

Note

Utilization restriction	EMC: class A product, see manufacturer’s declaration in the download area

Dimensions

Width	17.5 mm
Height	116.6 mm
Depth	114.5 mm

Ambient conditions

Ambient temperature (operation)	-25 °C … 60 °C (observe derating)
Ambient temperature (storage/transport)	-40 °C … 85 °C
Max. permissible relative humidity (operation)	75 % (on average, 85% infrequently, non-condensing)
Max. permissible humidity (storage/transport)	75 % (on average, 85% infrequently, non-condensing)
Maximum altitude	≤ 2000 m (Above sea level)

Power supply

Designation	A1/A2
Rated control circuit supply voltage U_S	24 V DC -20 % / +25 % (provide external protection)
Rated control supply current I_S	typ. 60 mA
Power consumption at U_S	typ. 1.44 W
Inrush current	typ. 2.5 A (Δt = 500 µs at U_s)
Filter time	1 ms (at A1 in the event of voltage dips at U_s)
Protective circuit	Serial protection against polarity reversal Suppressor diode

Supply of the IO-Link ports

Designation	L+/L-
Nominal voltage for I/O supply	24 V DC -20 % / +25 % (is provided via the IO-Link interface of the IO-Link master.)
Current consumption	typ. 16 mA
Type of protection	Serial protection against polarity reversal
Protective circuit/component	Suppressor diode

Digital inputs

Input name	Sensor circuit S0
	S12, S22
Description of the input	safety-related sensor inputs
	NPN (S12), NPN/PNP (S22)
Number of inputs	2
Input voltage range “0” signal	0 V DC … 5 V DC (S12)
	For S22, see note in “Signal generator connection versions” section.
Input voltage range “1” signal	11 V DC … 30 V DC
Input current range “0” signal	0 mA … 2 mA (S12, S22)
Inrush current	< 5 mA (typ. with U_Sat S12, Δt = 150 ms)
	< 5 mA (typically with U_Sat S22/24 V, Δt = 500 µs)
	> -5 mA (typically with U_Sat S22/0 V, Δt = 500 µs)
Current consumption	< 5 mA (Typically with U_Sat S12)
	< 5 mA (typically with U_Sat S22/24 V)
	> -5 mA (typically with U_Sat S22/0 V)
Filter time	1.5 ms (Test pulse width of low test pulses)
	Test pulse rate = 5 x Test pulse width
	Deactivate switch-on pulses/light tests for safety applications.
Max. permissible overall conductor resistance	150 Ω
Concurrence input 1/2	∞
Protective circuit/component	Suppressor diode
Input name	Sensor circuit S1
	S32, S42
Description of the input	safety-related sensor inputs
	NPN
Number of inputs	2
Input voltage range “0” signal	0 V DC … 5 V DC
Input voltage range “1” signal	11 V DC … 30 V DC
Input current range “0” signal	0 mA … 2 mA
Inrush current	< 20 mA (typically with U_S)
Current consumption	< 5 mA (typically with U_S)
Filter time	max. 1.5 ms (Test pulse width of low test pulses)
	Test pulse rate = 5 x Test pulse width
	Deactivate switch-on pulses/light tests for safety applications.
Max. permissible overall conductor resistance	150 Ω
Concurrence input 1/2	∞
Protective circuit/component	Suppressor diode
Input name	Diagnostic input
	DGN
Description of the input	non-safety-related
Number of inputs	1
Input voltage range	0 V DC … 30 V DC
Current consumption	typ. 30 mA
Protective circuit/component	Suppressor diode
Input name	Start circuit
	S34
Description of the input	NPN (manual start), PNP (autostart)
Number of inputs	1
Input voltage range “1” signal	19.2 V DC … 30 V DC (manual start, autostart: 0 V)
Inrush current	< 10 mA (typically with U_S, Δt = 100 ms)
Current consumption	< 5 mA (typically with U_Sat S34/24 V)
	> -5 mA (typically with U_Sat S34/0 V)
Max. permissible overall conductor resistance	150 Ω
Protective circuit/component	Suppressor diode

IO-Link inputs

Designation	IO-Link
Specification	Version 1.1
Transmission speed	230 kbps (COM3)
Cycle Time	5 ms
Process data update	5 ms
Amount of process data	max. 31 Byte (Input data)
	max. 16 Byte (Output data)
Number of ports	1
Connection method	Spring-cage connection
Connection technology	3-wire
Port type	Class A
Input name	C/Q
Description of the input	IO-Link switching and communication cable
Number of inputs	1

Relay outputs: enabling current path

Output name	Enabling current path
	13/14, 23/24
Output description	safety-related N/O contacts
	2 NO contacts each in series, without delay, floating
Number of outputs	2 (undelayed)
Contact type	2 enabling current paths
Contact material	AgSnO₂
Switching voltage	min. 12 V AC/DC
	max. 250 V AC/DC (Observe the load curve)
Limiting continuous current	6 A
Inrush current	min. 3 mA
	max. 6 A
Sq. Total current	72 A²(observe derating)
Switching capacity	min. 60 mW
Switching frequency	0.5 Hz
Mechanical service life	10x 10⁶cycles
Switching capacity according to IEC 60947-5-1	4 A (24 V (DC13))
	5 A (250 V (AC15))
Output fuse	6 A gL/gG
	4 A gL/gG (for low-demand applications)

Alarm outputs

Designation	M1
Output description	PNP
	non-safety-related
Number of outputs	1
Voltage	approx. 22 V DC (U_s– 2 V)
Current	max. 100 mA
Maximum inrush current	500 mA (Δt = 1 ms at U_s)
Protective circuit/component	Suppressor diode

Times

Typical pickup time at US	< 250 ms (when controlled via A1)
Typical response time at US	< 220 ms (automatic start)
	< 175 ms (manual, monitored start)
Typical release time at US	< 20 ms (on demand via the sensor circuit)
	< 20 ms (on demand via A1)
Restart time	< 1 s (Boot time)
Recovery time	< 500 ms

General

Relay type	Electromechanical relay with forcibly guided contacts in accordance with IEC/EN 61810-3 (EN 50205)
Nominal operating mode	100% operating factor
Net weight	150.98 g
Mounting position	vertical or horizontal
Mounting type	DIN rail mounting
Assembly instructions	See derating curve
Degree of protection	IP20
Min. degree of protection of inst. location	IP54
Housing material	PBT
Housing color	yellow
Operating voltage display	1 x green, yellow, red LED
Status display	5x LED green

Connection capacity

Connection method	Push-in spring connection
pluggable	Yes
Conductor cross section solid	0.2 mm² … 1.5 mm²
Conductor cross section flexible	0.2 mm² … 1.5 mm²
Conductor cross section AWG / kcmil	24 … 16
Conductor cross section flexible, with ferrule without plastic sleeve	0.25 mm² … 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.25 mm² … 1.5 mm² (only together with CRIMPFOX 6)
Stripping length	8 mm

Safety-related characteristic data

Stop category	0
Designation	IEC 61508 – High demand
Safety Integrity Level (SIL)	3
Designation	IEC 61508 – Low demand
Safety Integrity Level (SIL)	3
Designation	EN ISO 13849
Performance level (PL)	e (4 A DC13; 5 A AC15; 8760 switching cycles/year)
Category	4
Designation	EN 62061
Safety Integrity Level Claim Limit (SIL CL)	3

Standards and Regulations

Designation	Air clearances and creepage distances between the power circuits
Standards/regulations	DIN EN 60947-1
Rated insulation voltage	320 V
	320 V
Rated surge voltage/insulation	Basic insulation 4 kV between all current paths and housing
	Safe isolation, reinforced insulation 4 kV between input circuit and enabling current path (13/14) and enabling current path (23/24)
Degree of pollution	2
Overvoltage category	II
Shock	15g
Vibration (operation)	10 Hz … 150 Hz, 2g
Conformance	CE-compliant

Environmental Product Compliance

REACh SVHC	Lead 7439-92-1
China RoHS	Environmentally Friendly Use Period = 50
	For details about hazardous substances go to tab “Downloads”, Category “Manufacturer’s declaration”

Classifications

[email protected]

[email protected] 5.1	27371901
[email protected] 6.0	27371819
[email protected] 8.0	27371819
[email protected] 9.0	27371819

ETIM

ETIM 5.0	EC001449
ETIM 6.0	EC001449
ETIM 7.0	EC001449

Drawings
Dimensions
Power supply
Digital inputs
Relay outputs: enabling current path
Times
Connection capacity
Standards and Regulations
Classifications

Note
Ambient conditions
Supply of the IO-Link ports
IO-Link inputs
Alarm outputs
General
Safety-related characteristic data
Environmental Product Compliance

Drawings


Block diagram		Circuit diagram

Dimensions

Width	17.5 mm
Height	116.6 mm
Depth	114.5 mm

MÁY IN CÔNG NGHIỆP

MÁY SẢN XUẤT KHÍ NI-TƠ

MÁY ĐÓNG GÓI

DỊCH VỤ TƯ VẤN

Dịch vụ tư vấn - Khảo sát miễn phí duy nhất tại Trường Thịnh Tech

thi công lắp đặt

Trường Thịnh Tech cung cấp và lắp đặt hoàn thiện dự án

bảo dưỡng định kỳ

Bảo hành - bảo dưỡng với các sản phẩm, dịch vụ do Trường Thịnh Tech cấp ra

THIẾT BỊ

Trường Thịnh cung cấp thiết bị và máy móc trọn gói, đúng chuẩn cho Quý doanh nghiệp