Key Commercial Data
Orderkey | 2900316 |
---|---|
Packing unit | 10 pc |
Catalog page | Page 372 (C-5-2017) |
GTIN | 4046356506984 |
Weight per Piece (excluding packing) | 35.940 g |
Custom tariff number | 85364190 |
Country of origin | DE (Germany) |
Note
Utilization restriction | EMC: class A product, see manufacturer’s declaration in the download area |
---|---|
Note | Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC… or FBST 500…. |
Ambient conditions
Ambient temperature (operation) | -40 °C … 60 °C |
---|---|
Ambient temperature (storage/transport) | -40 °C … 85 °C |
Coil side
Nominal input voltage UN | 12 V DC |
---|---|
Typical input current at UN | 15.3 mA |
Typical response time | 5 ms |
Typical release time | 8 ms |
Protective circuit | Reverse polarity protection Polarity protection diode |
Free-wheeling diode Damping diode | |
Operating voltage display | Yellow LED |
Power dissipation for nominal condition | 0.18 W |
Contact side
Contact type | 1 PDT |
---|---|
Type of switch contact | Single contact |
Contact material | AgSnO |
Maximum switching voltage | 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC… or …FBST 500…) |
Minimum switching voltage | 5 V (at 100 mA) |
Min. switching current | 10 mA (at 12 V) |
Maximum inrush current | 10 A (4 s) |
Limiting continuous current | 6 A |
Interrupting rating (ohmic load) max. | 140 W (at 24 V DC) |
20 W (at 48 V DC) | |
18 W (at 60 V DC) | |
23 W (at 110 V DC) | |
40 W (at 220 V DC) | |
1500 VA (for 250 V AC) | |
Switching capacity | 2 A (at 24 V, DC13) |
0.2 A (at 110 V, DC13) | |
0.1 A (at 220 V, DC13) | |
3 A (at 24 V, AC15) | |
3 A (at 120 V, AC15) | |
3 A (at 230 V, AC15) |