PACT RCP-4000A-1A-D140-3M-UV 1058044 PHOENIX CONTACT Set consisting of one 1 A measuring transducer and one ..

PACT RCP-4000A-1A-D140-3M-UV 1058044 PHOENIX CONTACT Set consisting of one 1 A measuring transducer and one ..

PACT RCP-4000A-1A-D140-3M-UV 1058044 PHOENIX CONTACT Set consisting of one 1 A measuring transducer and one ..

Set consisting of one 1 A measuring transducer and one UV-resistant Rogowski coil with signal line. Length of Rogowski coil: 600 mm, diameter: 140 mm. Length of signal line: 3 m. The Rogowski coil measures the AC current of busbars and power lines.

sản phẩm chính hãng, MỚI 100% CHƯA SỬ DỤNG
SẢN PHẨM LUÔN ĐƯỢC KIỂM TRA TRƯỚC KHI XUẤT KHO
BẢO HÀNH 12 THÁNG ĐỐI VỚI LỖI CỦA NHÀ SẢN XUẤT / HOẶC THEO CHÍNH SÁCH CỦA SẢN PHẨM DO TRƯỜNG THỊNH PHÂN PHỐI
HỖ TRỢ KỸ THUẬT 24/7
MIỄN PHÍ GIAO HÀNG ĐỐI VỚI CÁC ĐƠN HÀNG TỪ 8,000,000VNĐ

Liên hệ:

SKU: 1058044 Danh mục: INTERFACE Components (IF) Thẻ: 1058044, PACT RCP-4000A-1A-D140-3M-UV, PHOENIX_CONTACT

Mô tả

Key Commercial Data

Orderkey	1058044
Packing unit	1
Catalog page	Page 224 (C-5-2019)
GTIN	4055626702261
Custom tariff number	85437090

Dimensions
Measuring transducer supply
Measuring transducer input data
Measuring coil signal output
General data, measuring coil
General data
Standards and Regulations
Classifications

Ambient conditions
Measuring coil input data
Measuring transducer signal input
Measuring transducer signal output
General data for measuring transducer
Connection data
Environmental Product Compliance

Dimensions

Width	22.5 mm
Height	85 mm
Depth	70.4 mm

Ambient conditions

Ambient temperature (operation)	-30 °C … 80 °C (Measuring coil)
	-20 °C … 70 °C (Measuring transducer)
Ambient temperature (storage/transport)	-40 °C … 80 °C (Measuring coil)
	-25 °C … 85 °C (Measuring transducer)
Maximum altitude	< 2000 m
Permissible humidity (operation)	5 % … 95 % (non-condensing)
Measuring coil degree of protection	IP67 (not assessed by UL)
Measuring transducer degree of protection	IP20

Measuring transducer supply

Nominal supply voltage	24 V DC -20 % … +25 %
Nominal supply voltage range	19.2 V DC … 30 V DC
Max. current consumption	190 mA
Power consumption	4 W

Measuring coil input data

Frequency measuring range	40 Hz … 20000 Hz
Position error	< 1 %
Linearity error	0.1 %

Measuring transducer input data

Measuring ranges (current)	100 A 250 A 400 A 630 A 1000 A 1500 A 2000 A 4000 A
Configurable/programmable	Via DIP switches
Phase angle	< 1 °
Rated power	1.5 VA
Max. distances for copper cables at P_{N max}	32 m (0.75 mm² (AWG 20))
	64 m (1.5 mm² (AWG 16))
	107 m (2.5 mm² (AWG 14))

Measuring transducer signal input

Input signal (at 50 Hz)	100 mV (1000 A)
Input impedance	27 kΩ (smallest measuring range)

Measuring coil signal output

Output signal (at 50 Hz)	100 mV (no load, at 1,000 A)
Output voltage (in no-load operation)	V_OUT= M * dI/dt
Output voltage (sinusoidal, in no-load operation)	100 mV (V_OUT= 2 * π * M * f * I (M = 0.318 μH; example: At 50 Hz; I = 1,000 A))

Measuring transducer signal output

Current output signal	0 A AC … 1 A
Load	0 Ω … 1.5 Ω

General data, measuring coil

Length of measuring coil	450 mm
Diameter of measuring coil	8.3 mm ±0.2 mm
Length of signal cable	3000 mm
Conductor structure signal line	2x 0.22 mm (Signal (tinned))
	1x 0.22 mm (Shielding (tinned))
Coil material	Elastollan
Housing material	PC
Insulation	double insulation
Rated insulation voltage	1000 V AC (rms CAT III)
	600 V AC (rms CAT IV)
Test voltage	10.45 kV (DC / 1 min.)
Basic accuracy

General data for measuring transducer

Linearity error	< 0.5 % (From the range end value)
Maximum transmission error	≤ 0.5 % (From the range end value)
Frequency range	45 Hz … 65 Hz
Max. detectable harmonics	< 2 kHz
Current consumption	< 190 mA (at 19.2 V)
Housing material	Polyamide
Test voltage	1.5 kV AC (Supply/input and output: 50 Hz, 1 min)
Operating voltage display	Green LED
UL, USA/Canada	UL 508 Listed

General data

Standards/regulations	IEC 61010-1
	IEC 61010-2-032
Insulation	double insulation
Temperature coefficients	0.005 %/K (+10°C … +70°C; both components have the same ambient temperature)
	0.07 %/K (-20°C … +10°C; both components have the same ambient temperature)
Typical measuring error	< 1 %

Connection data

Connection name	Measuring transducer side
Connection method	Screw connection
Stripping length	7 mm
Screw thread	M3
Conductor cross section solid	0.2 mm² … 2.5 mm²
Conductor cross section flexible	0.2 mm² … 2.5 mm²
Conductor cross section AWG	24 … 14
Torque	0.5 Nm … 0.6 Nm

Standards and Regulations

Standards/regulations	IEC 61010-1
	IEC 61010-2-032
Insulation	double insulation
Pollution degree	2
Overvoltage category	III (1000 V, to neutral conductor)
	IV (600 V, to neutral conductor)

Environmental Product Compliance

REACh SVHC	Lead 7439-92-1
China RoHS	Environmentally Friendly Use Period = 50
	For details about hazardous substances go to tab “Downloads”, Category “Manufacturer’s declaration”

Classifications

[email protected]

[email protected] 4.0	27210900
[email protected] 4.1	27210900
[email protected] 5.0	27210900
[email protected] 5.1	27210900
[email protected] 6.0	27210900
[email protected] 7.0	27210902
[email protected] 9.0	27210902

ETIM

ETIM 6.0	EC002048
ETIM 7.0	EC002048

Dimensions
Measuring transducer supply
Measuring transducer input data
Measuring coil signal output
General data, measuring coil
General data
Standards and Regulations
Classifications

Ambient conditions
Measuring coil input data
Measuring transducer signal input
Measuring transducer signal output
General data for measuring transducer
Connection data
Environmental Product Compliance

Dimensions

Width	22.5 mm
Height	85 mm
Depth	70.4 mm

Measuring coil input data

Frequency measuring range	40 Hz … 20000 Hz
Position error	< 1 %
Linearity error	0.1 %

(+84) 908 556 822

(+84) 938 388 289