-
Features
Functional principle Photoelectric proximity sensor Functional principle detail Background suppression Actuator Pneumatic, valve on board Max. number of sensors Approx. 30 1) Logical principle of operation Single accumulation, single release, block (slug) release Dimensions (W x H x D) 18 mm x 99.5 mm x 46 mm Sensing range max. 300 mm … 900 mm Sensing range 300 mm … 900 mm Type of light Infrared light Light source LED 2) Light spot size (distance) Ø 40 mm (900 mm) Adjustment Potentiometer Special applications ZoneControl - 1) Maximum per individual incoming power supply at 27.6 V DC as well as being dependent on solenoid valve (1 W)/motor or isolated power supply for motor-driven rollers.
- 2) Average service life: 100,000 h at TU = +25 °C.
-
Mechanics/electronics
Supply voltage 10 V DC … 30 V DC 1) Ripple < 5 Vpp 2) Current consumption 25 mA 3) Switching output PNP Switching mode Dark switching Signal voltage PNP HIGH/LOW Approx. UV – < 2.0 V/0 V Output current Imax. ≤ 100 mA Switching frequency 250 Hz Connection type Male connector M12, 4-pin Connection type for daisy chain Cable with female connector, M12, 4-pin, 2 m Circuit protection A 4)
C 5)
D 6)
Protection class II 7) Weight 110 g Housing material Plastic, ABS Enclosure rating IP54 Ambient operating temperature –40 °C … +60 °C Ambient temperature, storage –40 °C … +75 °C UL File No. NRKH.E181493 & NRKH7.E181493 - 1) Limit values.
- 2) May not exceed or fall below Uv tolerances.
- 3) Without load and valve deenergized.
- 4) A = VS connections reverse-polarity protected.
- 5) C = interference suppression.
- 6) D = outputs overcurrent and short-circuit protected.
- 7) Reference voltage: 50 V DC.
-
Classifications
eCl@ss 5.0 27270904 eCl@ss 5.1.4 27270904 eCl@ss 6.0 27270904 eCl@ss 6.2 27270904 eCl@ss 7.0 27270904 eCl@ss 8.0 27270904 eCl@ss 8.1 27270904 eCl@ss 9.0 27270904 eCl@ss 10.0 27270904 eCl@ss 11.0 27270904 eCl@ss 12.0 27270903 ETIM 5.0 EC002719 ETIM 6.0 EC002719 ETIM 7.0 EC002719 ETIM 8.0 EC002719 UNSPSC 16.0901 39121528