MultiTask photoelectric sensorsRoller Sensor Bar

Type:RSB1-0614D106148HKAHZZZZZZ

Part no.:
1130384

sản phẩm chính hãng, MỚI 100% CHƯA SỬ DỤNG
SẢN PHẨM LUÔN ĐƯỢC KIỂM TRA TRƯỚC KHI XUẤT KHO
BẢO HÀNH 12 THÁNG ĐỐI VỚI LỖI CỦA NHÀ SẢN XUẤT / HOẶC THEO CHÍNH SÁCH CỦA SẢN PHẨM DO TRƯỜNG THỊNH PHÂN PHỐI
HỖ TRỢ KỸ THUẬT 24/7
MIỄN PHÍ GIAO HÀNG ĐỐI VỚI CÁC ĐƠN HÀNG TỪ 8,000,000VNĐ

Liên hệ:

Mô tả

Show all

Hide all

Features

Functional principle

Photoelectric proximity sensor

Functional principle detail

Energetic

Sensing range
Sensing range min.	2 mm
Sensing range max.	300 mm
Reference object	Object with 90% remission (based on standard white, DIN 5033)
Recommended sensing range for the best performance	2 mm … 45 mm

Emitted beam
Light source	LED
Type of light	Infrared light
Shape of light spot	Point-shaped
Light spot size (distance)	27 mm x 29 mm (45 mm)
Maximum dispersion of the emitted beam around the standardized transmission axis (squint angle)	< +/- 4° (at Ta = +23 °C)

Key LED figures
LED risk group marking	Free group
Wave length	850 nm
Average service life	100,000 h at T_a = +25 °C

Number of beams

Beam separation

106 mm

Distance from 1st beam to leading edge of housing (including end cap)

148 mm

Smallest detectable object (MDO) typ.
	148 mm (Dependent on distance between beams)

Adjustment
None	–

Indication
LED green	Operating indicator Static on: power on Flashing: IO-Link mode
LED yellow	Status of received light beam Static on: object present Static off: object not present

Special applications

Detecting flat objects, Detecting perforated objects, Detecting objects with position tolerances, Detecting uneven, shiny objects

Electrical data

Supply voltage U_B

10 V DC … 30 V DC

Ripple

≤ 5 V_pp

Usage category

DC-12 (According to EN 60947-5-2)

DC-13 (According to EN 60947-5-2)

Current consumption

17 mA, without load. At U_B = 24 V

Protection class

III

Digital output
Number	1
Type	PNP: open collector
Signal voltage PNP HIGH/LOW	Approx. U_B-2.5 V / 0 V
Output current I_max.	≤ 100 mA
Circuit protection outputs	Reverse polarity protected
	Overcurrent protected
	Short-circuit protected
Response time	≤ 1 ms ¹⁾
Repeatability (response time)	1 ms
Switching frequency	500 Hz ²⁾

Pin/Wire assignment
— 1	Not connected
BN 2	+ (L+)
BK 3	Q₁
WH 4	Q₂
BU 5	– (M)
— 6	Not connected
Function of pin 4/black (BK)	Digital output, dark switching, object present → output LOW
Function of pin 3/black (BK)	Digital output, light switching, object present → output HIGH

¹⁾ Signal transit time with resistive load.
²⁾ With light/dark ratio 1:1.

Mechanical data

Dimensions (W x H x D)

614 mm x 20.3 mm x 17 mm ¹⁾

Connection

Cable with connector RJ12, 6-pin ²⁾

Connection detail
Deep-freeze property	Do not bend below 0 °C
Conductor size	0.13 mm²
Cable diameter	Ø 3.6 mm
Length of cable (L)	2,500 mm ²⁾

Material
Housing	Metal, Aluminum (anodised)
Front screen	Plastic, PMMA
Cable	Plastic, PVC
Male connector	Plastic, polycarbonate

Weight

Approx. 222.9 g

Mounting system type

None

¹⁾ W = length of Roller Sensor Bar (in the installed state).
²⁾ Due to the manufacturing process, the cable can be a little longer.

Ambient data

Enclosure rating	IP67 (EN 60529)
Ambient operating temperature	–40 °C … +60 °C
Ambient temperature, storage	–40 °C … +75 °C
Shock resistance	30 g, 11 ms (3 positive and 3 negative shocks along X, Y, Z axes, 18 total shocks (EN60068-2-27))
Vibration resistance	10 Hz … 55 Hz (Amplitude 1 mm, 3 x 30 min (EN60068-2-6))
Air humidity	15 % … 95 %, Relative humidity (no condensation) As per IEC 60947-5-2
Electromagnetic compatibility (EMC)	EN 60947-5-2
UL File No.	NRKH.E189383 & NRKH7.E189383