-
Features
Functional principle Photoelectric retro-reflective sensor Functional principle detail Autocollimation, Reflex Array Dimensions (W x H x D) 24.6 mm x 82.5 mm x 53.3 mm Housing design (light emission) Rectangular Minimum object size 2 mm, position-independent detection within the light array Detection height 10 mm Sensing range max. 0 m … 1.5 m 1) 2) Distance of the sensor to reflector ≥ 0 m Type of light Visible red light Light source PinPoint LED 3) Light spot size (distance) 10 mm x 9 mm (1 m) Wave length 635 nm Adjustment BluePilot: Teach-in AutoAdapt ✔ Special applications Detecting objects with position tolerances, Detecting perforated objects, Detecting uneven, shiny objects, Detecting transparent objects, Detecting flat objects - 1) Reflector PL80A.
- 2) At minimum object size 10 mm.
- 3) Average service life: 100,000 h at TU = +25 °C.
-
Mechanics/electronics
Supply voltage 10 V DC … 30 V DC 1) Ripple < 5 Vpp Current consumption 25 mA 2)
40 mA 3)
Switching output Push-pull: PNP/NPN Output function Factory setting: Pin 2 / white: NPN normally closed (light switching), PNP normally open (dark switching), Pin 4 / black: NPN normally open (dark switching), PNP normally closed (light switching) Switching mode Light/dark switching Signal voltage PNP HIGH/LOW Approx. VS – 2.5 V / 0 V Signal voltage NPN HIGH/LOW Approx. VS / < 2.5 V Output current Imax. ≤ 100 mA Response time ≤ 500 µs 4) Switching frequency 1,000 Hz 5) Connection type Cable with M12 male connector, 4-pin, 270 mm 6) Cable material PVC Circuit protection A 7)
B 8)
C 9)
D 10)
Protection class III Weight 100 g Housing material Plastic, VISTAL® Optics material Plastic, PMMA Enclosure rating IP66
IP67
Ambient operating temperature –40 °C … +60 °C 11) 12) Ambient temperature, storage –40 °C … +75 °C UL File No. NRKH.E181493 & NRKH7.E181493 - 1) Limit values.
- 2) 16 V DC … 30 V DC, without load.
- 3) 10 V DC … 16 V DC, without load.
- 4) Signal transit time with resistive load in switching mode.
- 5) With light/dark ratio 1:1 in switching mode.
- 6) Do not bend below 0 °C.
- 7) A = VS connections reverse-polarity protected.
- 8) B = inputs and output reverse-polarity protected.
- 9) C = interference suppression.
- 10) D = outputs overcurrent and short-circuit protected.
- 11) Avoid condensation on the front screen of the sensor and on the reflector.
- 12) Allowed temperature change after Teach +/- 20 K.
-
Safety-related parameters
MTTFD 709 years DCavg 0 %
-
Classifications
eCl@ss 5.0 27270902 eCl@ss 5.1.4 27270902 eCl@ss 6.0 27270902 eCl@ss 6.2 27270902 eCl@ss 7.0 27270902 eCl@ss 8.0 27270902 eCl@ss 8.1 27270902 eCl@ss 9.0 27270902 eCl@ss 10.0 27270902 eCl@ss 11.0 27270902 eCl@ss 12.0 27270902 ETIM 5.0 EC002717 ETIM 6.0 EC002717 ETIM 7.0 EC002717 ETIM 8.0 EC002717 UNSPSC 16.0901 39121528