WTD20E-W1114

MultiTask photoelectric sensors
DeltaPac

sản phẩm chính hãng, MỚI 100% CHƯA SỬ DỤNG
SẢN PHẨM LUÔN ĐƯỢC KIỂM TRA TRƯỚC KHI XUẤT KHO
BẢO HÀNH 12 THÁNG ĐỐI VỚI LỖI CỦA NHÀ SẢN XUẤT / HOẶC THEO CHÍNH SÁCH CỦA SẢN PHẨM DO TRƯỜNG THỊNH PHÂN PHỐI
HỖ TRỢ KỸ THUẬT 24/7
MIỄN PHÍ GIAO HÀNG ĐỐI VỚI CÁC ĐƠN HÀNG TỪ 8,000,000VNĐ

Features

Functional principle	Photoelectric proximity sensor
Dimensions (W x H x D)	42 mm x 42 mm x 45 mm
Housing design (light emission)	Rectangular
Sensing range max.	30 mm … 35 mm ¹⁾
Sensing range	30 mm … 40 mm
Type of light	Visible red light
Light source	PinPoint LED ²⁾
Light spot size (distance)	Ø 1 mm (30 mm) ³⁾
Wave length	635 nm
Adjustment	None
Special applications	Zero gap detection
Background suppression	≥ 80 mm
Key feature of the object	Smoothed edges, rounded out body and prism shaped

¹⁾ The sensing range max. refers to the object leading edge. The individual object leading edges must be within the operating range.
²⁾ Average service life: 100,000 h at T_U = +25 °C.
³⁾ 4 x.

Mechanics/electronics

Supply voltage	10 V DC … 30 V DC ¹⁾
Ripple	< 5 V_pp ²⁾
Current consumption	70 mA ³⁾
Switching output	NPN
Output current I_max.	≤ 100 mA ⁴⁾
Connection type	Cable, 4-wire, 2 m ⁵⁾
Cable material	PVC
Conductor cross section	0.14 mm²
Circuit protection	A ⁶⁾ B ⁷⁾ C ⁸⁾
Protection class	III
Weight	130 g
Housing material	Plastic, Novodur
Enclosure rating	IP67
Ambient operating temperature	–40 °C … +55 °C
Ambient temperature, storage	–40 °C … +75 °C
Productivity max.	≤ 54,000 pcs./h
Object speed max.	≤ 1.2 m/s
Radius of the object contour	5 mm … 20 mm
Switching accuracy	≤ 2 x radius
Repeatability (T_a not constant)	typ. < 1 mm
Switch on delay Q₁ & Q₂	≤ 60 ms
Time delay off Q₁	≤ 60 ms
Object width min.	≥ 30 mm
Object height min.	≥ 50 mm

¹⁾ Limit values, reverse-polarity protected, operation in short-circuit protected network: max. 8 A.
²⁾ May not exceed or fall below U_v tolerances.
³⁾ At 24 V.
⁴⁾ 2 switching outputs with Imax = 100 mA.
⁵⁾ Do not bend below 0 °C.
⁶⁾ A = V_S connections reverse-polarity protected.
⁷⁾ B = inputs and output reverse-polarity protected.
⁸⁾ C = interference suppression.

Classifications