-
Features
Minimum detectable object (MDO) Parallel beam, 35 mm 1) Beam separation 30 mm Number of beams 70 Detection height 2,070 mm Configuration Standard (switching) - 1) MDO min. detectable object.
-
Mechanics/electronics
Light source Infrared light Wave length 880 nm Supply voltage Vs DC 18 V … 30 V 1) Power consumption sender 280 mA 2) Power consumption receiver 310 mA 2) Ripple < 5 Vpp Output current Imax. ≤ 100 mA 3) Output load capacitive 100 nF Output load inductive 1 H Initialization time 1 s Dimensions (W x H x D) 34 mm x 2,164 mm x 29 mm Connection type Male connector M12, 5-pin Housing material Aluminum Indication 7-segment display, 7-segment display Synchronization Cable Enclosure rating IP65
4)Circuit protection UV connections, reverse polarity protected
Output Q short-circuit protected
Interference pulse suppression
Protection class III Weight 5.261 kg Front screen PMMA Switching output 1 x PNP - 1) Without load.
- 2) , Without load with 24 V.
- 3) Typical value.
- 4) Operating in outdoor condition only with a external protection housing.
-
Performance
Maximum range 7 m 1) Minimum range Parallel beam: ≥ 0 mm Operating range 5 m Response time Parallel beam, 11.5 ms 2) - 1) No reserve for environmental issue and deterioration of the diode.
- 2) With resistive load.
-
Ambient data
EMC EN 60947-5-2 Ambient operating temperature –25 °C +55 °C Ambient storage temperature –40 °C +70 °C Ambient light immunity Direct: 12,500 lx 1)
Indirect: 50,000 lx 1)
Vibration resistance 5 g, 10 Hz … 55 Hz (IEC 68-2-6) Shock load 10 g / IEC 68-2-29 / 16 ms - 1) Sunlight.
-
Classifications
ECl@ss 5.0 27270910 ECl@ss 5.1.4 27270910 ECl@ss 6.0 27270910 ECl@ss 6.2 27270910 ECl@ss 7.0 27270910 ECl@ss 8.0 27270910 ECl@ss 8.1 27270910 ECl@ss 9.0 27270910 ECl@ss 10.0 27270910 ECl@ss 11.0 27270910 ETIM 5.0 EC002549 ETIM 6.0 EC002549 ETIM 7.0 EC002549 UNSPSC 16.0901 39121528







