-
Features
Functional principle Photoelectric retro-reflective sensor Functional principle detail Autocollimation Dimensions (W x H x D) 7.7 mm x 21.8 mm x 13.5 mm Housing design (light emission) Rectangular Sensing range max. 0 m … 1.2 m 1) Sensing range 0 m … 0.55 m 1) Type of light Visible red light Light source PinPoint LED 2) Light spot size (distance) Ø 12 mm (250 mm) Wave length 640 nm Adjustment IO-Link Pin 2 configuration External input, Teach-in input, Sender off input, Detection output, logic output, Device contamination alarm output AutoAdapt ✔ Special applications Detecting transparent objects Special features Detecting transparent objects - 1) Reflector P250F.
- 2) Average service life: 100,000 h at TU = +25 °C.
-
Mechanics/electronics
Supply voltage 10 V DC … 30 V DC 1) Ripple < 5 Vpp 2) Current consumption 20 mA 3) Switching output PNP Switching mode Light/dark switching Output current Imax. ≤ 50 mA Response time < 0.5 ms 4) Response time Q/ on Pin 2 300 µs … 450 µs 4) 5) Switching frequency 1,000 Hz Switching frequency Q / to pin 2 1,000 Hz 5) 6) Connection type Cable with M8 male connector, 4-pin, 200 mm 7) Cable material PVC Cable diameter Ø 3 mm Circuit protection A 8)
B 9)
D 10)
Protection class III Polarisation filter ✔ Housing material Plastic, ABS/PC Optics material Plastic, PMMA Enclosure rating IP67 Special feature Detecting transparent objects Ambient operating temperature –20 °C … +50 °C Ambient temperature, storage –40 °C … +75 °C UL File No. NRKH.E181493 Repeatability Q/ on Pin 2: 150 µs - 1) Limit values.
- 2) May not exceed or fall below Uv tolerances.
- 3) Without load.
- 4) Signal transit time with resistive load.
- 5) Valid for Q on Pin2, if configured with software.
- 6) With light/dark ratio 1:1.
- 7) Do not bend below 0 °C.
- 8) A = VS connections reverse-polarity protected.
- 9) B = output reverse-polarity protected.
- 10) D = outputs overcurrent and short-circuit protected.
-
Safety-related parameters
MTTFD 1,987 years DCavg 0 %
-
Communication interface
Communication interface IO-Link V1.1 Communication Interface detail COM2 (38,4 kBaud) Cycle time 2.3 ms Process data length 16 Bit Process data structure Bit 0 = switching signal QL1
Bit 1 = switching signal QL2
Bit 2 … 15 = empty
VendorID 26 DeviceID HEX 0x800124 DeviceID DEC 8388900
-
Smart Task
Smart Task name Base logics Logic function Direct
AND
OR
WINDOW
Hysteresis
Timer function Deactivated
On delay
Off delay
ON and OFF delay
Impulse (one shot)
Inverter Yes Switching frequency SIO Direct: 1000 Hz
SIO Logic: 1000 Hz
IOL: 900 Hz
Response time SIO Direct: 300 µs … 450 µs 1)
SIO Logic: 500 µs … 600 µs 2)
IOL: 500 µs … 900 µs 3)
Repeatability SIO Direct: 150 µs 1)
SIO Logic: 150 µs 2)
IOL: 400 µs 3)
Switching signal Switching signal QL1 Switching output Switching signal QL2 Switching output - 1) SIO Direct: sensor operation in standard I/O mode without IO-Link communication and without using internal sensor logic or time parameters (set to “direct”/”deactivated”).
- 2) SIO Logic: Sensor operation in standard I/O mode without IO-Link communication. Sensor-internal logic or timing parameters plus Automation Functions used.
- 3) IOL: Sensor operation with full IO-Link communication and usage of logic, timing and Automation Function parameters.
-
Diagnosis
Device status Yes Quality of teach Yes Quality of run Yes, Contamination display
-
Classifications
eCl@ss 5.0 27270902 eCl@ss 5.1.4 27270902 eCl@ss 6.0 27270902 eCl@ss 6.2 27270902 eCl@ss 7.0 27270902 eCl@ss 8.0 27270902 eCl@ss 8.1 27270902 eCl@ss 9.0 27270902 eCl@ss 10.0 27270902 eCl@ss 11.0 27270902 eCl@ss 12.0 27270902 ETIM 5.0 EC002717 ETIM 6.0 EC002717 ETIM 7.0 EC002717 ETIM 8.0 EC002717 UNSPSC 16.0901 39121528