-
Features
System part Receiver Resolution 14 mm Scanning range 10 m Protective field height 1,200 mm Synchronization Optical synchronisation
-
Safety-related parameters
Type Type 4 (IEC 61496-1) Safety integrity level SIL3 (IEC 61508) Category Category 4 (EN ISO 13849) Performance level PL e (EN ISO 13849) PFHD (mean probability of a dangerous failure per hour) 28 * 10-9 (EN ISO 13849) TM (mission time) 20 years (EN ISO 13849) Safe state in the event of a fault At least one OSSD is in the OFF state.
-
Functions
Functions Delivery status Restart interlock ✔ Internal External device monitoring (EDM) ✔ Activated Beam coding ✔ Uncoded Configurable status output (ADO) ✔ Contamination (OWS) Sender test ✔ Deactivated Configurable scanning range ✔ Low scanning range
-
Interfaces
System connection Connection type Male connector M12, 8-pin Permitted cable length ≤ 15 m 1) Permitted cross-section ≥ 0.25 mm² Extension connection Female connector M12, 5-pin Configuration method Configuration buttons Display elements 7-segment display, LEDs Status display LEDs End cap with integrated LED on the receiver ✔ - 1) Depending on load, power supply and wire cross-section. The technical specifications must be observed.
-
Electrical data
Protection class III (IEC 61140) Supply voltage VS 24 V DC (19.2 V … 28.8 V) Residual ripple ≤ 10 % 1) Power consumption ≤ 0.8 A 2) Output signal switching devices (OSSDs) Type of output 2 PNP semiconductors, short-circuit protected, cross-circuit monitored 3) ON state, switching voltage HIGH 24 V DC (VS – 2.25 V DC … VS) OFF state, switching voltage LOW ≤ 2 V DC Current-carrying capacity per OSSD ≤ 500 mA Application diagnostic outputs Type of output PNP semiconductor, short-circuit protected 3) ON state, switching voltage HIGH 24 V DC (VS – 4.2 V DC … VS) OFF state, switching voltage LOW High resistance Current-carrying capacity per OSSD ≤ 100 mA - 1) Within the limits of VS.
- 2) Without OSSDs, without ADO, without reset required and without UE403.
- 3) Applies to the voltage range between –30 V and +30 V.
-
Mechanical data
Housing cross-section 52 mm x 55.5 mm Housing material Aluminum alloy ALMGSI 0.5 Surface treatment Powder coated Front screen material Polycarbonate, scratch-resistant coating
-
Ambient data
Enclosure rating IP65 (EN 60529) Ambient operating temperature –30 °C … +55 °C Storage temperature –30 °C … +70 °C Air humidity 15 % … 95 %, Non-condensing Vibration resistance 5 g, 10 Hz … 55 Hz (IEC 60068-2-6) Shock resistance 10 g, 16 ms (EN 60068-2-29)
-
Other information
Wave length 950 nm
-
Classifications
eCl@ss 5.0 27272704 eCl@ss 5.1.4 27272704 eCl@ss 6.0 27272704 eCl@ss 6.2 27272704 eCl@ss 7.0 27272704 eCl@ss 8.0 27272704 eCl@ss 8.1 27272704 eCl@ss 9.0 27272704 eCl@ss 10.0 27272704 eCl@ss 11.0 27272704 eCl@ss 12.0 27272704 ETIM 5.0 EC002549 ETIM 6.0 EC002549 ETIM 7.0 EC002549 ETIM 8.0 EC002549 UNSPSC 16.0901 46171620