DL1000-S11102

Long range distance sensors
Dx1000 / DL1000

sản phẩm chính hãng, MỚI 100% CHƯA SỬ DỤNG
SẢN PHẨM LUÔN ĐƯỢC KIỂM TRA TRƯỚC KHI XUẤT KHO
BẢO HÀNH 12 THÁNG ĐỐI VỚI LỖI CỦA NHÀ SẢN XUẤT / HOẶC THEO CHÍNH SÁCH CỦA SẢN PHẨM DO TRƯỜNG THỊNH PHÂN PHỐI
HỖ TRỢ KỸ THUẬT 24/7
MIỄN PHÍ GIAO HÀNG ĐỐI VỚI CÁC ĐƠN HÀNG TỪ 8,000,000VNĐ

Mã: DL1000-S11102 Danh mục: Long range distance sensors Từ khóa: 1075439, DL1000-S11102

Mechanics/electronics

Supply voltage V_s	DC 18 V … 30 V, reverse polarity protected
Ripple	≤ 5 V_pp ¹⁾
Power consumption	≤ 22 W, With heating switched off ²⁾ ≤ 35 W, With heating switched on ²⁾
Initialization time	> 30 s
Housing material	Metal (Aluminum alloy (AlSi12))
Window material	Glass
Connection type	Round connector M12 x 1
Indication	Graphical, resistive touch display, status LEDs
Weight	1,000 g
Dimensions (W x H x D)	84 mm x 104.4 mm x 140.5 mm
Enclosure rating	IP65 ³⁾ IP67 ³⁾
Protection class	III (EN 61140)

Performance

Measurement principle	HDDM⁺
Measuring range	0.2 m … 1,500 m, on “diamond grade” reflective tape ¹⁾ ²⁾ ³⁾
Target	Reflector
Resolution	0.001 mm … 100 mm, adjustable ⁴⁾
Repeatability	≥ 1 mm, See repeatability characteristic lines ¹⁾ ⁵⁾ ⁶⁾ ⁷⁾
Accuracy	Typ. ± 15 mm, See measurement accuracy diagram ⁸⁾
Response time	3 ms … 384 ms ⁷⁾
Measurement cycle time	1 ms 4 ms 16 ms
Output time	≥ 1 ms ⁹⁾
Light source	Infrared light (905 nm, measuring laser) Visible red light (650 nm, Adjustment aid)
Laser class	1, even with simultaneous operation of measurement and alignment laser (IEC 60825-1:2014, EN 60825-1:2014)
Typ. light spot size (distance)	5 mm x 20 mm (at 1 m) ¹⁰⁾ 20 mm x 20 mm (at 5 m) ¹⁰⁾ 35 mm x 25 mm (at 10 m) ¹⁰⁾ 150 mm x 50 mm (at 50 m) ¹⁰⁾ 290 mm x 80 mm (at 100 m) ¹⁰⁾ 570 mm x 140 mm (at 200 m) ¹⁰⁾ 4,200 mm x 920 mm (at 1,500 m) ¹⁰⁾
Filter	Rain and snow filter Fog filter Moving average distance value Kalman filter Moving average speed value
Additional function	Selection of relevant distance and signal level range, Selection of first or last echo in selected distance and signal level range
Average laser service life (at 25 °C)	100,000 h ¹¹⁾
Max. movement speed	128 m/s

¹⁾ With max. ambient light 100 kLux sunlight.
²⁾ See measuring range diagram.
³⁾ Dependent on reflector size and measuring cycle time.
⁴⁾ Data interface resolution.
⁵⁾ Statistical error 1 σ, environmental conditions constant, min. warm-up time > about 15 min.
⁶⁾ On “diamond grade” reflective tape.
⁷⁾ Dependent on selected filter settings and measuring cycle time.
⁸⁾ At T = +23 °C and after warm-up time > about 15 min.
⁹⁾ Depending on interface used.
¹⁰⁾ See light spot size diagram.
¹¹⁾ Measuring laser.

Interfaces

Ethernet	✔ , TCP/IP
Function	Parameterization, output of measurement data
Data transmission rate	10/100 MBit/s

PROFIBUS DP	✔
Function	Parameterization, output of measurement data
Data transmission rate	9.6 kBaud … 12 MBaud, Automatic detection

Serial	✔ , RS-422
Remark	Switchable to SSI
Function	Parameterization, output of measurement data

Inputs/outputs
In1/Q1	Digital input, digital output (Switchable)
QA/Q2	Analog output, digital output (Switchable)

Digital input

Internal pull-down circuit
HIGH switching voltage: min. 13 V … max. supply voltage

LOW switching voltage: max. 5 V

Switching functions: deactivate measuring laser, activate alignment laser, preset

¹⁾ Short-circuit protected, switching voltage U_V – 4 V.
²⁾ Internal pull-down switching, switching voltage HIGH: min. 13 V … max. supply voltage, switching voltage LOW: max. 5 V.
³⁾ Max. load = (U_v– 7 V) / 21.5 mA.

Ambient data

Ambient temperature, operation	–40 °C … +55 °C ¹⁾ –40 °C … +95 °C, operation with cooling case
Ambient temperature, storage	–40 °C … +75 °C
Max. rel. humidity (not condensing)	≤ 95 %
Effect of air pressure	0.3 ppm/hPa
Effect of air temperature	–1 ppm/K
Temperature drift	Typ. 0.25 mm/K
Typ. Ambient light immunity	≤ 100,000 lx
Mechanical load	Shock: 30 g / 6 ms according to DIN EN 60068-2-27 (Ea), 6 axes Continuous shock: 25 g / 6 ms according to DIN EN 60068-2-27 (fatigue), 500 shocks, 6 axes

¹⁾ At a temperature of –40 °C, a warm-up time of typ. 20 minutes is required (when supply voltage V_s = 24 V).

Classifications