-
Performance
Measuring range 0.15 m … 60 m, on “diamond grade” reflective tape Target Reflector Resolution 0.1 mm, 0.125 mm, 1 mm, 10 mm, 100 mm Repeatability 1.5 mm, at dead time 10 ms 1)
0.75 mm, at dead time 30 ms 1)
Accuracy ± 3 mm 2) Response time 2 ms Measurement cycle time 1 ms Output time 1 ms Light source Laser, red 3)
visible red lightLaser class 2, complies with 21 CFR 1040.10 and 1040.11 except for the conformance according to “Laser Notice No. 50” from June 24, 2007 (IEC 60825-1:2014, EN 60825-1:2014) Typ. light spot size (distance) 5 mm + (2 mm x distance in m) Max. movement speed 10 m/s Heating 
- 1) Statistical error 1 σ, environmental conditions constant, depending on operating mode.
- 2) From 150 mm … 180 mm measuring range the accuracy can reach ± 4 mm.
- 3) Average service life: 100,000 h at TU = +25 °C.
-
Interfaces
PROFINET Digital output Number 2 1) Type Push-pull: PNP/NPN Function Distance: Distance switching output Speed; Speed output Service: Warning message as the sensor ages, if the damping value is exceeded (for example when contaminated, if the permitted interior device temperature is exceeded or undercut, if the measured value has a plausibility error, if the laser is not ready for operation, if the heating is switched on Laser off Preset Maximum output current IA ≤ 100 mA 2) Multifunctional input (MF) 1 x MF1 3) - 1) HIGH = > VS – 3 V / LOW = < 2 V.
- 2) Max. 100 nF/20 mH.
- 3) HIGH > 12 V / LOW < 3 V.
Technical drawings
Dimensional drawing
Ethernet connection type
Voltage supply connection type
PROFINET port 1, port 2 connection type
Ethernet connection diagram
Adjustment possible DL100-xxxxxx12
Sản phẩm tương tự
Long range distance sensors
Long range distance sensors
Long range distance sensors
Long range distance sensors
Long range distance sensors
Long range distance sensors
Long range distance sensors
Long range distance sensors
