DGS34-1H402048

Incremental encoders
DGS3x

sản phẩm chính hãng, MỚI 100% CHƯA SỬ DỤNG
SẢN PHẨM LUÔN ĐƯỢC KIỂM TRA TRƯỚC KHI XUẤT KHO
BẢO HÀNH 12 THÁNG ĐỐI VỚI LỖI CỦA NHÀ SẢN XUẤT / HOẶC THEO CHÍNH SÁCH CỦA SẢN PHẨM DO TRƯỜNG THỊNH PHÂN PHỐI
HỖ TRỢ KỸ THUẬT 24/7
MIỄN PHÍ GIAO HÀNG ĐỐI VỚI CÁC ĐƠN HÀNG TỪ 8,000,000VNĐ

Liên hệ:

SKU: DGS34-1H402048 Danh mục: Incremental encoders Thẻ: 7101714, DGS34-1H402048

Mô tả

Performance

Pulses per revolution 2,048

Measuring step 90° electric/pulses per revolution

Measuring step deviation ± 45° / pulses per revolution

Error limits ± 45° / pulses per revolution

Interfaces

Communication interface Incremental

Communication Interface detail TTL / RS-422

Output frequency 300 kHz

Load current 40 mA

Operating current 120 mA (without load)

Electrical data

Connection type	Male connector, MS, 10-pin, radial
Supply voltage	4.5 … 5.5 V
Reference signal, number	1
Reference signal, position	180°, electronically, gated with B negative
Reverse polarity protection	✔

Mechanical data

Mechanical design	Blind hollow shaft
Shaft diameter	1″ ¹⁾
Flange type / stator coupling	T1 stator coupling
Weight	1.1 kg ²⁾
Shaft material	Brass
Flange material	Aluminum
Housing material	Aluminum
Start up torque	9 Ncm (+20 °C)
Operating torque	7 Ncm (+20 °C)
Operating speed	3,000 min⁻¹
Moment of inertia of the rotor	490 gcm²
Bearing lifetime	4.5 x 10^9 revolutions
Angular acceleration	≤ 100,000 rad/s²

¹⁾ Separately order collets for 1/2″, 3/4”, 5/8”, 7/8”, 10 mm, 12 mm, 14 mm, 15 mm, 18 mm, 20 mm, 22 mm, 24 mm and 25 mm as accessories.
²⁾ Based on devices with male connector.

Ambient data

EMC	EN 61000-6-2, EN 61000-6-3
Enclosure rating	IP66 ¹⁾
Permissible relative humidity	95 % (Condensation not permitted)
Operating temperature range	–20 °C … +70 °C
Storage temperature range	–30 °C … +85 °C, without package
Resistance to shocks	50 g, 11 ms
Resistance to vibration	20 g, 5 Hz … 2,000 Hz

¹⁾ With mating connector fitted.

Classifications

eCl@ss 5.0	27270501
eCl@ss 5.1.4	27270501
eCl@ss 6.0	27270590
eCl@ss 6.2	27270590
eCl@ss 7.0	27270501
eCl@ss 8.0	27270501
eCl@ss 8.1	27270501
eCl@ss 9.0	27270501
eCl@ss 10.0	27270501
eCl@ss 11.0	27270501
eCl@ss 12.0	27270501
ETIM 5.0	EC001486
ETIM 6.0	EC001486
ETIM 7.0	EC001486
ETIM 8.0	EC001486
UNSPSC 16.0901	41112113

Technical drawings

Dimensional drawing T1 stator coupling

Dimensional drawing

PIN assignment

Diagrams

(+84) 908 556 822

(+84) 938 388 289