DFS60I-S4PC01024

DFS60I-S4PC01024

Incremental encoders
DFS60

Liên hệ:

SKU: DFS60I-S4PC01024 Danh mục: Thẻ: ,



Show all


Hide all

  • Performance
    Pulses per revolution 1,024 1)
    Measuring step 90°, electric/pulses per revolution
    Measuring step deviation at binary number of lines ± 0.008°
    Error limits ± 0.03°
    • 1) See maximum revolution range.
  • Interfaces
    Communication interface Incremental
    Communication Interface detail TTL / HTL
    Factory setting Factory setting: output level TTL
    Number of signal channels 6-channel
    Programmable/configurable ✔
    Initialization time

    32 ms 1)

    30 ms
    Output frequency ≤ 820 kHz
    Load current ≤ 30 mA
    Operating current 40 mA (without load)
    Power consumption ≤ 0.7 W (without load)
    Load resistance ≥ 120 Ω
    • 1) With mechanical zero pulse width.
  • Electrical data
    Connection type Male connector, M12, 8-pin, radial
    Supply voltage 4.5 … 32 V
    Reference signal, number 1
    Reference signal, position 90°, electric, logically gated with A and B
    Reverse polarity protection ✔
    Short-circuit protection of the outputs ✔ 1) 2)
    MTTFd: mean time to dangerous failure 300 years (EN ISO 13849-1) 3)
    • 1) Programming TTL with ≥ 5.5 V: short-circuit opposite to another channel or GND permissable for maximum 30 s.
    • 2) Programming HTL or TTL with < 5.5 V: short-circuit opposite to another channel, US or GND permissable for maximum 30 s.
    • 3) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
  • Mechanical data
    Mechanical design Solid shaft, face mount flange
    Shaft diameter 10 mm
    Shaft length 19 mm
    Weight + 0.5 kg
    Shaft material Stainless steel V2A
    Flange material Stainless steel V2A
    Housing material Stainless steel V2A
    Start up torque 1 Ncm (+20 °C)
    Operating torque 0.5 Ncm (+20 °C)
    Permissible shaft loading

    80 N (radial)

    40 N (axial)
    Operating speed ≤ 9,000 min⁻¹ 1)
    Moment of inertia of the rotor 6.2 gcm²
    Bearing lifetime 3.6 x 10^10 revolutions
    Angular acceleration ≤ 500,000 rad/s²
    • 1) Allow for self-heating of 3.3 K per 1,000 rpm when designing the operating temperature range.
  • Ambient data
    EMC According to EN 61000-6-2 and EN 61000-6-3
    Enclosure rating

    IP67, housing side (IEC 60529) 1)

    IP67, shaft side (IEC 60529)
    Permissible relative humidity 90 % (Condensation not permitted)
    Operating temperature range

    –40 °C … +100 °C 2)

    –30 °C … +100 °C 3)
    Storage temperature range –40 °C … +100 °C, without package
    Resistance to shocks 100 g, 6 ms (EN 60068-2-27)
    Resistance to vibration 10 g, 10 Hz … 2,000 Hz (EN 60068-2-6)
    • 1) With mating connector fitted.
    • 2) Stationary position of the cable.
    • 3) Flexible position of the cable.
  • Classifications
    eCl@ss 5.0 27270501
    eCl@ss 5.1.4 27270501
    eCl@ss 6.0 27270590
    eCl@ss 6.2 27270590
    eCl@ss 7.0 27270501
    eCl@ss 8.0 27270501
    eCl@ss 8.1 27270501
    eCl@ss 9.0 27270501
    eCl@ss 10.0 27270501
    eCl@ss 11.0 27270501
    eCl@ss 12.0 27270501
    ETIM 5.0 EC001486
    ETIM 6.0 EC001486
    ETIM 7.0 EC001486
    ETIM 8.0 EC001486
    UNSPSC 16.0901 41112113


Show all


Hide all

Technical drawings


DFS60I-S4PC01024

Dimensional drawing Solid shaft, face mount flange


DFS60I-S4PC01024

PIN assignment


DFS60I-S4PC01024

Diagrams Mechanical zero pulse width 1° to 359° programmable. Width of the zero pulse in relation to a mechanical revolution of the shaft.


DFS60I-S4PC01024

Diagrams Electrical zero pulse width can be configured to 90°, 180°, or 270°. Width of the zero pulse in relation to a pulse period.


DFS60I-S4PC01024

maximum revolution range

Sản phẩm tương tự

DBS36E-BBCP02048
Quick View

Incremental encoders

DBS36E-BBCP02048

DBS36E-BBAP02500
Quick View

Incremental encoders

DBS36E-BBAP02500

DBS36E-BBEK02048
Quick View

Incremental encoders

DBS36E-BBEK02048

DBS36E-BBCK01000
Quick View

Incremental encoders

DBS36E-BBCK01000

DBS36E-BBEK00360
Quick View

Incremental encoders

DBS36E-BBEK00360

DBS36E-BBEK00500
Quick View

Incremental encoders

DBS36E-BBEK00500

DBS36E-BBCM02500
Quick View

Incremental encoders

DBS36E-BBCM02500

DBS36E-BBEK00200
Quick View

Incremental encoders

DBS36E-BBEK00200

(+84) 908 556 822
(+84) 938 388 289