Key Commercial Data
Orderkey | 0903023 |
---|---|
Packing unit | 6 pc |
Catalog page | Page 326 (C-4-2017) |
GTIN | 4046356327992 |
Weight per Piece (excluding packing) | 68.250 g |
Custom tariff number | 85362010 |
Country of origin | DE (Germany) |
General
Installation instructions | When mounted in rows without convection cooling, the nominal device current should only be led to a maximum of 80% due to the thermal effect during continuous operation (100% operating factor). Special precautionary measures must be taken in systems or machines, to prevent components from restarting (e.g., use of a safety PLC). Parallel connection of multiple circuit breakers is not permitted. |
---|---|
Mounting type | DIN rail: 35 mm |
Color | black |
Flammability rating according to UL 94 | V0 |
Electrical data
Fuse | electronic |
---|---|
Fuse type | Automatic device |
Rated surge voltage | 0.5 kV |
Operating voltage | 24 V DC |
18 V DC … 32 V DC | |
Nominal current IN | 1 A |
Required backup fuse | not required, integrated failsafe element |
Dielectric strength | max. 32 V DC (Load circuit) |
Degree of pollution | 2 |
Switching capacity ICN | Active current limitation |
Closed-circuit current range I0 | typ. 25 mA ±5 mA (When switched on) |
Ambient conditions
Degree of protection | IP20 (Housing) |
---|---|
Ambient temperature (operation) | 0 °C … 50 °C (non-condensing) |
Connection data
Conductor cross section solid min. | 0.5 mm² |
---|---|
Conductor cross section solid max. | 16 mm² |
Conductor cross section flexible min. | 0.5 mm² |
Conductor cross section flexible max. | 16 mm² |
Conductor cross section AWG min. | 20 |
Conductor cross section AWG max. | 6 |
Conductor cross section flexible, with ferrule without plastic sleeve min. | 0.5 mm² |
Conductor cross section flexible, with ferrule without plastic sleeve max. | 10 mm² |
Conductor cross section flexible, with ferrule with plastic sleeve min. | 0.5 mm² |
Conductor cross section flexible, with ferrule with plastic sleeve max. | 10 mm² |
2 conductors with same cross section, solid min. | 0.5 mm² |
2 conductors with same cross section, solid max. | 4 mm² |
2 conductors with same cross section, stranded min. | 0.5 mm² |
2 conductors with same cross section, stranded max. | 4 mm² |
2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. | 0.5 mm² |
2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. | 2.5 mm² |
2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, min. | 0.5 mm² |
2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, max. | 6 mm² |
Connection method | Screw connection |
Stripping length | 10 mm |
Screw thread | M4 |
Tightening torque max | 1.2 Nm |