PRO2-P100B25A1

PRO2-P100B25A1

Displacement measurement sensors
Profiler / Profiler2

sản phẩm chính hãng, MỚI 100% CHƯA SỬ DỤNG
SẢN PHẨM LUÔN ĐƯỢC KIỂM TRA TRƯỚC KHI XUẤT KHO
BẢO HÀNH 12 THÁNG ĐỐI VỚI LỖI CỦA NHÀ SẢN XUẤT / HOẶC THEO CHÍNH SÁCH CỦA SẢN PHẨM DO TRƯỜNG THỊNH PHÂN PHỐI
HỖ TRỢ KỸ THUẬT 24/7
MIỄN PHÍ GIAO HÀNG ĐỐI VỚI CÁC ĐƠN HÀNG TỪ 8,000,000VNĐ

Liên hệ:

SKU: PRO2-P100B25A1 Danh mục: Displacement measurement sensors Thẻ: 6052873, PRO2-P100B25A1

Mô tả

Mechanics/electronics

Supply voltage V_s	DC 12 V (–5 %) … DC 24 V (+10 %) ¹⁾
Power consumption	≤ 180 mA
Warm-up time	≤ 30 min
Housing material	Metal (zinc diecast)
Window material	Plastic (Polycarbonat (PC))
Connection type	Female connector, HRS, 12-pin (I/O, power supply)
Indication	2 LEDs (operational status, Laser on/off) Dot matrix display
Weight	300 g
Dimensions (W x H x D)	40 mm x 94.5 mm x 60 mm
Enclosure rating	IP67
Protection class	III

¹⁾ When using analog voltage output reduced to 18 V DC (–5%) … 24 V DC (+10%).

Performance

Measuring range	75 mm … 125 mm
Measuring width (at measuring distance)	17 mm (75 mm) 22 mm (100 mm) 27 mm (125 mm)
Target	Natural objects
Repeatability	25 µm, x-direction ¹⁾ ²⁾ 2 µm, z-direction
Linearity	X-direction ± 170 µm … ± 270 µm ³⁾ ⁴⁾ Z-direction ± 50 µm
Response time	≥ 5 ms ⁵⁾
Light source	Laser, red visible red light
Laser class	2, complies with 21 CFR 1040.10 and 1040.11 except for the conformance according to “Laser Notice No. 50” from June 24, 2007 (IEC 60825-1:2014, EN 60825-1:2014) ⁶⁾
Typ. light spot size (distance)	0.3 mm x 32 mm
Additional function	Timer (ON-OFF delay, one shot, off), averaging 1 … 1,023, sensitivity (adjustable), Measurement functions (average, peak height, bottom height, width, peak height position, bottom height position, edge position, edge count, tilt, area, length, diameter)

¹⁾ Typical value; actual value depends on settings and environmental conditions. For details see field of view.
²⁾ Measurement on 90 % remission (ceramic, white), for OD25-x measurement on mirror; averaging set to: 256; constant ambient conditions.
³⁾ Measurement on 90 % remission (ceramic, white).
⁴⁾ Constant ambient conditions.
⁵⁾ Typical value, high-res mode.
⁶⁾ Wavelength: 655 nm, max. output: 1 mW.

Interfaces

Serial	✔ , RS-485
Data transmission rate	9.6 kbit/s … 4 Mbit/s, half-duplex

Digital output
Number	3
Type	PNP
Maximum output current I_A	≤ 100 mA

Analog output
Number	1
Type	Current output
Current	4 mA … 20 mA, ≤ 300 Ω ¹⁾

External input

Selectable from bank, trigger, hold, reset, laser off and offset

¹⁾ 24 mA for measuring out of range.

Ambient data

Ambient temperature, operation	–10 °C … +40 °C, Operating temperature at V_S = 24 V
Ambient temperature, storage	–20 °C … +60 °C
Max. rel. humidity (not condensing)	85 %
Temperature drift	± 0.05 % FS/K (FS = Full Scale = Measuring range of sensor)
Typ. Ambient light immunity	Artificial light: ≤ 3,000 lx Sunlight: ≤ 10,000 lx
Vibration resistance	10 Hz … 55 Hz (amplitude 1.5 mm, x-, y-, z-axis 2 hours each)
Shock resistance	50 G (x, y, z axis 3 times each)

Classifications

eCl@ss 5.0	27270801
eCl@ss 5.1.4	27270801
eCl@ss 6.0	27270801
eCl@ss 6.2	27270801
eCl@ss 7.0	27270801
eCl@ss 8.0	27270801
eCl@ss 8.1	27270801
eCl@ss 9.0	27270801
eCl@ss 10.0	27270801
eCl@ss 11.0	27270801
eCl@ss 12.0	27270916
ETIM 5.0	EC001825
ETIM 6.0	EC001825
ETIM 7.0	EC001825
ETIM 8.0	EC001825
UNSPSC 16.0901	41111613

Technical drawings

Dimensional drawing

Field of view: sending area

Field of view: receiving area

Connection type

Connection diagram

(+84) 908 556 822

(+84) 938 388 289