-
Mechanics/electronics
Supply voltage Vs DC 12 V (–5 %) … DC 24 V (+10 %) 1) Power consumption ≤ 180 mA Warm-up time ≤ 30 min Housing material Metal (zinc diecast) Window material Plastic (Polycarbonat (PC)) Connection type Female connector, HRS, 12-pin (I/O, power supply) Indication 2 LEDs (operational status, Laser on/off)
Dot matrix display
Weight 300 g Dimensions (W x H x D) 40 mm x 94.5 mm x 60 mm Enclosure rating IP67 Protection class III - 1) When using analog voltage output reduced to 18 V DC (–5%) … 24 V DC (+10%).
-
Performance
Measuring range 75 mm … 125 mm Measuring width (at measuring distance) 17 mm (75 mm)
22 mm (100 mm)
27 mm (125 mm)
Target Natural objects Repeatability 25 µm, x-direction 1) 2)
2 µm, z-direction
Linearity X-direction ± 170 µm … ± 270 µm 3) 4)
Z-direction ± 50 µm
Response time ≥ 5 ms 5) Light source Laser, red
visible red lightLaser class 2, complies with 21 CFR 1040.10 and 1040.11 except for the conformance according to “Laser Notice No. 50” from June 24, 2007 (IEC 60825-1:2014, EN 60825-1:2014) 6) Typ. light spot size (distance) 0.3 mm x 32 mm Additional function Timer (ON-OFF delay, one shot, off), averaging 1 … 1,023, sensitivity (adjustable), Measurement functions (average, peak height, bottom height, width, peak height position, bottom height position, edge position, edge count, tilt, area, length, diameter) - 1) Typical value; actual value depends on settings and environmental conditions. For details see field of view.
- 2) Measurement on 90 % remission (ceramic, white), for OD25-x measurement on mirror; averaging set to: 256; constant ambient conditions.
- 3) Measurement on 90 % remission (ceramic, white).
- 4) Constant ambient conditions.
- 5) Typical value, high-res mode.
- 6) Wavelength: 655 nm, max. output: 1 mW.
-
Interfaces
Serial ✔ , RS-485 Data transmission rate 9.6 kbit/s … 4 Mbit/s, half-duplex Digital output Number 3 Type NPN Maximum output current IA ≤ 100 mA Analog output Number 1 Type Current output Current 4 mA … 20 mA, ≤ 300 Ω 1) External input Selectable from bank, trigger, hold, reset, laser off and offset - 1) 24 mA for measuring out of range.
-
Ambient data
Ambient temperature, operation –10 °C … +40 °C, Operating temperature at VS = 24 V Ambient temperature, storage –20 °C … +60 °C Max. rel. humidity (not condensing) 85 % Temperature drift ± 0.05 % FS/K (FS = Full Scale = Measuring range of sensor) Typ. Ambient light immunity Artificial light: ≤ 3,000 lx
Sunlight: ≤ 10,000 lx
Vibration resistance 10 Hz … 55 Hz (amplitude 1.5 mm, x-, y-, z-axis 2 hours each) Shock resistance 50 G (x, y, z axis 3 times each)
-
Classifications
eCl@ss 5.0 27270801 eCl@ss 5.1.4 27270801 eCl@ss 6.0 27270801 eCl@ss 6.2 27270801 eCl@ss 7.0 27270801 eCl@ss 8.0 27270801 eCl@ss 8.1 27270801 eCl@ss 9.0 27270801 eCl@ss 10.0 27270801 eCl@ss 11.0 27270801 eCl@ss 12.0 27270916 ETIM 5.0 EC001825 ETIM 6.0 EC001825 ETIM 7.0 EC001825 ETIM 8.0 EC001825 UNSPSC 16.0901 41111613