-
Mechanics/electronics
Supply voltage Vs 12 V DC … 24 V DC, ± 10%, including residual ripple Power consumption ≤ 0.96 W, sender 1)
≤ 0.24 W, receiver 1)
Warm-up time ≤ 10 min Housing material Metal (Aluminum die cast) Window material Glass Connection type Cable with M8 male connector, 4-pin, Y cable for connection to AOD1 evaluation unit Indication 1 Status LED (sender)
2 status LEDs (receiver)
Weight 30 g (sender)
30 g (receiver)
Dimensions (W x H x D) 9.6 mm x 61 mm x 21 mm Enclosure rating IP50 Protection class III - 1) Without load.
-
Performance
Measuring range 10 mm Installation distance 0 mm … 300 mm, Sender/receiver Minimum detectable object 0.2 mm Repeatability 10 µm Linearity ± 40 µm Response time ≥ 0.5 ms Measuring frequency ≤ 2 kHz Light source Laser, red
visible red lightLaser class 1 (IEC 60825-1:2014, EN 60825-1:2014) Typ. light spot size (distance) 3 mm x 14 mm Additional function Measurement modes: Edge detection or diameter/width measurement, adjustable average filter, sensitivity adjustment for measuring transparent objects
-
Interfaces
Serial ✔ Remark For communication with AOD1 evaluation unit Digital output Number 3 1) Type PNP/NPN, selectable Analog output Number 1 1) Type Current output Current 4 mA … 20 mA, ≤ 300 Ω - 1) Optional over evaluation unit AOD1.
-
Ambient data
Ambient temperature, operation –10 °C … +50 °C 1) Ambient temperature, storage –20 °C … +60 °C Relative air humidity (non-condensing) 35 % … 85 % Temperature drift ± 2 µm/K Typ. Ambient light immunity Artificial light: ≤ 3,000 lx
Sunlight: ≤ 10,000 lx
Vibration resistance EN 60068-2-6 Shock resistance EN 60068-2-27 - 1) Operating temperature at VS = 24 V.
-
Classifications
eCl@ss 5.0 27270801 eCl@ss 5.1.4 27270801 eCl@ss 6.0 27270801 eCl@ss 6.2 27270801 eCl@ss 7.0 27270801 eCl@ss 8.0 27270801 eCl@ss 8.1 27270801 eCl@ss 9.0 27270801 eCl@ss 10.0 27270801 eCl@ss 11.0 27270801 eCl@ss 12.0 27270916 ETIM 5.0 EC001825 ETIM 6.0 EC001825 ETIM 7.0 EC001825 ETIM 8.0 EC001825 UNSPSC 16.0901 41111613