Displacement measurement sensorsOD2000

Type:OD2000-7002T15

Part no.:
6074385

sản phẩm chính hãng, MỚI 100% CHƯA SỬ DỤNG
SẢN PHẨM LUÔN ĐƯỢC KIỂM TRA TRƯỚC KHI XUẤT KHO
BẢO HÀNH 12 THÁNG ĐỐI VỚI LỖI CỦA NHÀ SẢN XUẤT / HOẶC THEO CHÍNH SÁCH CỦA SẢN PHẨM DO TRƯỜNG THỊNH PHÂN PHỐI
HỖ TRỢ KỸ THUẬT 24/7
MIỄN PHÍ GIAO HÀNG ĐỐI VỚI CÁC ĐƠN HÀNG TỪ 8,000,000VNĐ

Mã sản phẩm: OD2000-7002T15 Danh mục: Displacement measurement sensors Thẻ: Part no.: 6074385, Type:OD2000-7002T15

Mechanics/electronics

Supply voltage V_s	DC 18 V … 24 V, ± 10%, including residual ripple ¹⁾
Power consumption	1.5 W, At 24 V DC ²⁾
Warm-up time	< 30 min
Housing material	Plastic (PBT)
Window material	Plastic (PMMA)
Connection type	Cable with male connector, M12, 5-pin, A-coded, 30 cm
Indication	OLED display, status LEDs
Control elements	4 buttons
Weight	90 g
Dimensions (W x H x D)	27 mm x 60 mm x 50 mm
Enclosure rating	IP67
Protection class	III (EN 50178)
Electrical safety	IEC 61010-1 AMD 1:2016-12

Performance

Measuring range	200 mm … 1,200 mm ¹⁾
Target	Natural objects
Repeatability	100 µm ²⁾ ³⁾ ⁴⁾
Linearity	± 1 mm, 200 mm … 700 mm ²⁾ ⁴⁾ ⁵⁾ ± 3 mm, 700 mm … 1,200 mm ²⁾ ⁴⁾ ⁵⁾
Response time	≥ 0.533 ms ⁶⁾
Measuring frequency	≤ 7.5 kHz
Output time	≥ 0.1333 ms
Light source	Laser, red visible red light
Laser class	2 (IEC 60825-1:2014, EN 60825-1:2014) ⁷⁾
Typ. light spot size (distance)	Ø 1 mm (700 mm)
Additional function	Adjustable average value or media filter, Switching mode: Distance to Object (DtO) / switching window / object between sensor and background (ObSB), teach-in of digital output, invertable digital output, teach-in of analog output, Invertable analog output, Switchable analog output (mA / V), Multifunctional input: sender off/hold functions/deactivated, switch-off display, lock user interface, Display can be rotated by 180°, Alarm function, Edge height jump, Time functions (ON/OFF delay, 1 shot), region of interest

¹⁾ 6 % … 90 % remission; at default settings.
²⁾ Measurement on 60 % remission (ceramic, white).
³⁾ Average value setting: 512, median: 31, measuring frequency: 7.5 kHz, at T = 25 °C, in the middle of the measuring range, at constant basic conditions.
⁴⁾ At T = +25 °C, under constant general conditions.
⁵⁾ Observe min. warm-up time of 30 minutes.
⁶⁾ Dependent on the set average or sensitivity.
⁷⁾ Visible, wavelength: 655 nm, max. average power: 1 mW, max. pulse power: 1 mW, max. pulse duration: 5 ms.

Interfaces

IO-Link	✔ , IO-Link V1.1
Function	Process data, parameterization, diagnosis, data storage
Data transmission rate	230,4 kbit/s (COM3), Process data length 6 bytes, min. cycle time 0.7 ms

Digital input

In₁
Can be used as sender off, trigger for hold functions, or deactivated

Analog output
Number	1
Type	Current output / voltage output
Function	Selectable
Current	4 mA … 20 mA, ≤ 300 Ω
Voltage	0 V … 10 V, > 10,000 Ω
Resolution	16 bit

¹⁾ PNP/PP: HIGH = UV > 13.5 V/LOW = UV < 8 V; NPN: HIGH = UV < 8 V/LOW = UV > 13.5 V.

Ambient data

Ambient temperature, operation	–10 °C … +50 °C, Operating temperature at V_S = 24 V
Ambient temperature, storage	–20 °C … +60 °C
Relative air humidity (non-condensing)	35 % … 85 %
Temperature drift	600 µm/K
Typ. Ambient light immunity	Artificial light: ≤ 3,000 lx ¹⁾ Sunlight: ≤ 10,000 lx
Vibration resistance	EN 60068-2-6, EN 60068-2-64
Shock resistance	EN 60068-2-27

Classifications