-
Mechanics/electronics
Supply voltage Vs DC 18 V … 24 V, ± 10%, including residual ripple 1) Power consumption 1.5 W, At 24 V DC 2) Warm-up time < 30 min Housing material Plastic (PBT) Window material Plastic (PMMA) Connection type Cable with male connector, M12, 5-pin, A-coded, 30 cm Indication OLED display, status LEDs Control elements 4 buttons Weight 90 g Dimensions (W x H x D) 27 mm x 60 mm x 50 mm Enclosure rating IP67 Protection class III (EN 50178) Electrical safety IEC 61010-1 AMD 1:2016-12 - 1) Limit values, reverse-polarity protected.
- 2) Without load, at +20 °C.
-
Performance
Measuring range 40 mm … 60 mm 1) Target Natural objects Repeatability 0.2 µm 2) 3) 4) Linearity ± 20 µm 2) 4) 5) Response time ≥ 0.533 ms 6) Measuring frequency ≤ 7.5 kHz Output time ≥ 0.1333 ms Light source Laser, red
visible red lightLaser class 1 (IEC 60825-1:2014, EN 60825-1:2014) 7) Typ. light spot size (distance) Ø 70 µm (50 mm) Additional function Adjustable average value or media filter, Switching mode: Distance to Object (DtO) / switching window / object between sensor and background (ObSB), teach-in of digital output, invertable digital output, teach-in of analog output, Invertable analog output, Switchable analog output (mA / V), Multifunctional input: sender off/hold functions/deactivated, switch-off display, lock user interface, Display can be rotated by 180°, Alarm function, Edge height jump, Time functions (ON/OFF delay, 1 shot), region of interest - 1) 6 % … 90 % remission; at default settings.
- 2) Measurement on 60 % remission (ceramic, white).
- 3) Average value setting: 512, median: 31, measuring frequency: 5 kHz, in the middle of the measuring range, for static measurement.
- 4) Observe min. warm-up time of 30 minutes.
- 5) At T = +25 °C, under constant general conditions.
- 6) Dependent on the set average or sensitivity.
- 7) Visible, wavelength: 655 nm, max. average power: 0.39 mW, max. pulse power: 0.39 mW, max. pulse duration: 5 ms.
-
Interfaces
IO-Link ✔ , IO-Link V1.1 Function Process data, parameterization, diagnosis, data storage Data transmission rate 230,4 kbit/s (COM3), Process data length 6 bytes, min. cycle time 0.7 ms Digital input In1
Can be used as sender off, trigger for hold functions, or deactivatedDigital output Number 2 1) Type PNP/NPN, selectable Analog output Number 1 Type Current output / voltage output Function Selectable Current 4 mA … 20 mA, ≤ 300 Ω Voltage 0 V … 10 V, > 10,000 Ω Resolution 16 bit - 1) PNP/PP: HIGH = UV > 13.5 V/LOW = UV < 8 V; NPN: HIGH = UV < 8 V/LOW = UV > 13.5 V.
-
Ambient data
Ambient temperature, operation –10 °C … +50 °C, Operating temperature at VS = 24 V Ambient temperature, storage –20 °C … +60 °C Relative air humidity (non-condensing) 35 % … 85 % Temperature drift 12 µm/K Typ. Ambient light immunity Artificial light: ≤ 3,000 lx 1)
Sunlight: ≤ 10,000 lx
Vibration resistance EN 60068-2-6, EN 60068-2-64 Shock resistance EN 60068-2-27 - 1) With constant object movement in the measuring range.
-
Classifications
eCl@ss 5.0 27270801 eCl@ss 5.1.4 27270801 eCl@ss 6.0 27270801 eCl@ss 6.2 27270801 eCl@ss 7.0 27270801 eCl@ss 8.0 27270801 eCl@ss 8.1 27270801 eCl@ss 9.0 27270801 eCl@ss 10.0 27270801 eCl@ss 11.0 27270801 eCl@ss 12.0 27270916 ETIM 5.0 EC001825 ETIM 6.0 EC001825 ETIM 7.0 EC001825 ETIM 8.0 EC001825 UNSPSC 16.0901 41111613