OD5-30W05

Displacement measurement sensors
OD Precision

sản phẩm chính hãng, MỚI 100% CHƯA SỬ DỤNG
SẢN PHẨM LUÔN ĐƯỢC KIỂM TRA TRƯỚC KHI XUẤT KHO
BẢO HÀNH 12 THÁNG ĐỐI VỚI LỖI CỦA NHÀ SẢN XUẤT / HOẶC THEO CHÍNH SÁCH CỦA SẢN PHẨM DO TRƯỜNG THỊNH PHÂN PHỐI
HỖ TRỢ KỸ THUẬT 24/7
MIỄN PHÍ GIAO HÀNG ĐỐI VỚI CÁC ĐƠN HÀNG TỪ 8,000,000VNĐ

Mechanics/electronics

Supply voltage V_s	DC 12 V … 24 V ¹⁾
Warm-up time	≤ 5 min
Housing material	Metal (Aluminum)
Window material	Glass
Connection type	0.5 m cable with connector ²⁾
Indication	LEDs, 4” color display on optional evaluation unit
Weight	250 g ³⁾
Dimensions (W x H x D)	29 mm x 78 mm x 75 mm
Enclosure rating	IP67
Protection class	III

Performance

Measuring range	25 mm … 35 mm ¹⁾ ²⁾
Target	Natural objects
Repeatability	0.2 µm ³⁾
Linearity	Diffuse ± 8 µm ³⁾ Specular ± 4 µm ³⁾
Response time	≥ 0.1 ms ⁴⁾ ⁵⁾
Measuring frequency	≤ 10 kHz ¹⁾ ⁵⁾
Output time	≥ 0.1 ms
Light source	Laser, red visible red light
Laser class	2 (IEC 60825-1:2014, EN 60825-1:2014) ⁶⁾
Typ. light spot size (distance)	260 µm x 1,000 µm (30 mm)
Special task	Thickness measurement of transparent material
Additional function	Mean-value setting 1 … 4,096x, selectable measuring frequency (automatic / 0.1 ms … 3.2 ms), automatic sensitivity adjustment, manual sensitivity adjustment, Mutual interference, Glass thickness measurement
Thickness measurement of transparent material	0.9 mm … 5 mm

¹⁾ 6 % … 90 % remission; at default settings.
²⁾ If there are reflections, the measuring range is reduced to 23.6 mm … 28.6 mm.
³⁾ Measurement at 90% remission (ceramic, white), or mirror for OD5-25x; averaging set to: 256 or 4096 for OD5-25x; constant ambient conditions.
⁴⁾ Time needed for automatic sensitivity adjustment is calculated as: sampling period x 20. At default setting 100 µs (10kHz) this is <= 2ms.
⁵⁾ Default setting for OD5-350×100 and OD5-500×200 = 0.8 ms, or 1.25 kHz, all others = 0.1 ms/10 kHz.
⁶⁾ Wavelength: 658 nm, max. output: 1 mW.

Interfaces

Serial	✔ , RS-422
Remark	RS-232 optional via external evaluation unit AOD5

Analog output
Number	3 ¹⁾ ²⁾
Type	Current output / voltage output
Current	4 mA … 20 mA, ≤ 300 Ω
Voltage	0 V … 10 V ³⁾

Laser-off input

1 x laser-off

¹⁾ Optional over evaluation unit AOD5.
²⁾ A maximum of three current and three voltage outputs are possible via the AOD5 evaluation unit.
³⁾ Output resistance 100 Ω, min. load 10 k Ω.

Ambient data

Ambient temperature, operation	–10 °C … +50 °C
Ambient temperature, storage	–20 °C … +60 °C
Relative air humidity (non-condensing)	35 % … 85 %
Temperature drift	± 0.01 % FS/K (FS = Full Scale = Measuring range of sensor)
Typ. Ambient light immunity	Artificial light: ≤ 3,000 lx Sunlight: ≤ 10,000 lx
Vibration resistance	10 Hz … 55 Hz (amplitude 1.5 mm, x-, y-, z-axis 2 hours each)
Shock resistance	50 G (x, y, z axis 3 times each)

General notes

Note on use OD Precision sensor head can be used in combination with AOD5-P/N1 or stand-alone via RS-422

Classifications