-
Features
Functional principle Photoelectric retro-reflective sensor Dimensions (W x H x D) 18 mm x 18 mm x 69 mm Housing design (light emission) Cylindrical Housing length 69 mm Thread diameter (housing) M18 x 1 Optical axis Axial Sensing range max. 0.05 m … 1 m 1) Sensing range 0.05 m … 1 m 1) Type of light Visible red light Light source LED 2) Light spot size (distance) Ø 50 mm (1 m) Wave length 680 nm Adjustment None Special features Cable DSL-1204-G02MC pre-assembled - 1) Reflector P250.
- 2) Average service life: 100,000 h at TU = +25 °C.
-
Mechanics/electronics
Supply voltage 10 V DC … 30 V DC 1) Ripple < 5 Vpp 2) Current consumption 30 mA 3) Switching output PNP 4) Switching mode Light/dark switching 4) Switching mode selector Selectable via L/D control cable Signal voltage PNP HIGH/LOW Approx. VS – 1.0 V / 0 V Output current Imax. ≤ 100 mA Response time ≤ 1.5 ms 5) Switching frequency 333 Hz 6) Connection type Male connector M12, 4-pin Circuit protection A 7)
C 8)
D 9)
Protection class III Weight 65 g Polarisation filter ✔ Special device ✔ Housing material Metal, Nickel-plated brass, PBT/PC Optics material Plastic, PMMA Enclosure rating IP66 Items supplied Reflector P250, fastening nuts (2 x) Ambient operating temperature –25 °C … +55 °C Ambient temperature, storage –40 °C … +70 °C UL File No. NRNT2.E128350 & NRNT8.E128350 - 1) Limit values.
- 2) May not exceed or fall below Uv tolerances.
- 3) Without load.
- 4) Control wire open: dark switching D.ON.
- 5) Signal transit time with resistive load.
- 6) With light/dark ratio 1:1.
- 7) A = VS connections reverse-polarity protected.
- 8) C = interference suppression.
- 9) D = outputs overcurrent and short-circuit protected.
-
Classifications
eCl@ss 5.0 27270902 eCl@ss 5.1.4 27270902 eCl@ss 6.0 27270902 eCl@ss 6.2 27270902 eCl@ss 7.0 27270902 eCl@ss 8.0 27270902 eCl@ss 8.1 27270902 eCl@ss 9.0 27270902 eCl@ss 10.0 27270902 eCl@ss 11.0 27270902 eCl@ss 12.0 27270902 ETIM 5.0 EC002717 ETIM 6.0 EC002717 ETIM 7.0 EC002717 ETIM 8.0 EC002717 UNSPSC 16.0901 39121528