-
Features
Functional principle Photoelectric retro-reflective sensor Dimensions (W x H x D) 18 mm x 18 mm x 36.8 mm Housing design (light emission) Cylindrical Housing length 36.8 mm Thread diameter (housing) M18 x 1 Optical axis Axial Sensing range max. 0.035 m … 5 m 1) Sensing range 0.035 m … 3.5 m 1) Focus Approx. 1.5° Type of light Visible red light Light source LED 2) Light spot size (distance) Ø 80 mm (3.5 m) Angle of dispersion Approx. 1.5° Wave length 650 nm Adjustment None Special features Health output - 1) Reflector PL80A.
- 2) Average service life: 100,000 h at TU = +25 °C.
-
Mechanics/electronics
Supply voltage 10 V DC … 30 V DC 1) Ripple < 5 Vpp 2) Current consumption 30 mA 3) Switching output NPN Switching mode Light switching Signal voltage NPN HIGH/LOW Uv / < 2,9 V Output current Imax. ≤ 100 mA Response time ≤ 1.25 ms 4) Switching frequency 400 Hz 5) Connection type Male connector M12, 4-pin Circuit protection A 6)
C 7)
D 8)
Protection class III Weight 7 g Polarisation filter ✔ Special device ✔ Housing material Plastic, ABS Optics material Plastic, PMMA Enclosure rating IP67
IP69K
Ambient operating temperature –25 °C … +55 °C Ambient temperature, storage –25 °C … +70 °C UL File No. NRKH.E189383 & NRKH7.E189383 - 1) Limit values.
- 2) May not exceed or fall below Uv tolerances.
- 3) Without load.
- 4) Signal transit time with resistive load.
- 5) With light/dark ratio 1:1.
- 6) A = VS connections reverse-polarity protected.
- 7) C = interference suppression.
- 8) D = outputs overcurrent and short-circuit protected.
-
Classifications
eCl@ss 5.0 27270902 eCl@ss 5.1.4 27270902 eCl@ss 6.0 27270902 eCl@ss 6.2 27270902 eCl@ss 7.0 27270902 eCl@ss 8.0 27270902 eCl@ss 8.1 27270902 eCl@ss 9.0 27270902 eCl@ss 10.0 27270902 eCl@ss 11.0 27270902 eCl@ss 12.0 27270902 ETIM 5.0 EC002717 ETIM 6.0 EC002717 ETIM 7.0 EC002717 ETIM 8.0 EC002717 UNSPSC 16.0901 39121528







