-
Features
Functional principle Photoelectric retro-reflective sensor Functional principle detail Dual lens Sensing range Sensing range min. 0.25 m Sensing range max. 3 m Maximum distance range from reflector to sensor (operating reserve 1) 0.25 m … 19 m Recommended distance range from reflector to sensor (operating reserve 3,75) 0.2 m … 14 m Reference reflector Reflector PL80A Recommended sensing range for the best performance 0.25 m … 14 m Polarisation filters Yes Emitted beam Light source PinPoint LED Type of light Visible red light Shape of light spot Point-shaped Light spot size (distance) Ø 8 mm (1 m) Maximum dispersion of the emitted beam around the standardized transmission axis (squint angle) < +/- 1.0° (at Ta = +23 °C) Key LED figures Normative reference EN 62471:2008-09 | IEC 62471:2006, modified LED risk group marking Free group Wave length 635 nm Average service life 100,000 h at Ta = +25 °C Adjustment None – Indication LED green Operating indicator
Static on: power onLED yellow Status of received light beam
Static on: object not present
Static off: object present
Flashing: Below the 1.5 function reserve
-
Safety-related parameters
MTTFD 2,039 years DCavg 0 % TM (mission time) 20 years (EN ISO 13849)
Rate of use: 60 %
-
Electrical data
Supply voltage UB 10 V DC … 30 V DC 1) Ripple ≤ 5 Vpp Usage category DC-12 (According to EN 60947-5-2)
DC-13 (According to EN 60947-5-2)
Current consumption ≤ 30 mA, without load. At UB = 24 V Protection class III Digital output Number 2 (Complementary) Type Push-pull: PNP/NPN Signal voltage PNP HIGH/LOW Approx. UB-2.5 V / 0 V Signal voltage NPN HIGH/LOW Approx. UB / < 2.5 V Output current Imax. ≤ 100 mA Circuit protection outputs Reverse polarity protected Overcurrent and short-circuit protected Response time ≤ 500 µs 2) Repeatability (response time) 150 µs Switching frequency 1,000 Hz 3) Pin/Wire assignment Function of pin 4/black (BK) Digital output, light switching, object present → output Q LOW Function of pin 2/white (WH) Digital output, dark switching, object present → output Ǭ HIGH Output function Factory setting: Pin 2 / white: NPN normally closed (light switching), PNP normally open (dark switching), Pin 4 / black: NPN normally open (dark switching), PNP normally closed (light switching) - 1) Limit values.
- 2) Signal transit time with resistive load in switching mode.
- 3) With light/dark ratio 1:1.
-
Mechanical data
Housing Rectangular Dimensions (W x H x D) 24.6 mm x 82.5 mm x 53.3 mm Connection Male connector M12, 4-pin Material Housing Plastic, VISTAL® Front screen Plastic, PMMA Male connector Plastic, VISTAL® Weight Approx. 80 g Maximum tightening torque of the fixing screws 1.3 Nm
-
Ambient data
Enclosure rating IP66 (EN 60529)
IP67 (EN 60529)
IP69 (EN 60529) 1)
Ambient operating temperature –40 °C … +60 °C Ambient temperature, storage –40 °C … +75 °C Shock resistance 50 g, 11 ms (25 positive and 25 negative shocks per axis, for X, Y, Z axes, 150 shocks in total (EN60068-2-27))
50 g, 6 ms (5,000 positive and 5,000 negative shocks per axis, for X, Y, Z axes, 30,000 shocks in total (EN60068-2-27))
Vibration resistance 10 Hz … 2,000 Hz (Amplitude 0.5 mm / 10 g, 20 sweeps per axis, for X, Y, Z axes, 1 octave/min, (EN60068-2-6)) Air humidity 35 % … 95 %, Relative humidity (no condensation) Electromagnetic compatibility (EMC) EN 60947-5-2 Resistance to cleaning agent ECOLAB UL File No. NRKH.E181493 & NRKH7.E181493 - 1) Replaces IP69K with ISO 20653: 2013-03.
-
Classifications
eCl@ss 5.0 27270902 eCl@ss 5.1.4 27270902 eCl@ss 6.0 27270902 eCl@ss 6.2 27270902 eCl@ss 7.0 27270902 eCl@ss 8.0 27270902 eCl@ss 8.1 27270902 eCl@ss 9.0 27270902 eCl@ss 10.0 27270902 eCl@ss 11.0 27270902 eCl@ss 12.0 27270902 ETIM 5.0 EC002717 ETIM 6.0 EC002717 ETIM 7.0 EC002717 ETIM 8.0 EC002717 UNSPSC 16.0901 39121528