-
Features
Functional principle Photoelectric retro-reflective sensor Functional principle detail Autocollimation Sensing range max. 0 m … 5 m 1) Sensing range 0 m … 3 m 1) Polarisation filters Yes Emitted beam Light source PinPoint LED 2) Type of light Visible red light Light spot size (distance) Ø 45 mm (1.5 m) Key LED figures Wave length 650 nm Adjustment IO-Link
Single teach-in button
Pin 2 configuration External input, Teach-in input, Sender off input, Detection output, logic output, Device contamination alarm output - 1) Reflector PL80A.
- 2) Average service life: 100,000 h at TU = +25 °C.
-
Safety-related parameters
MTTFD 1,222 years DCavg 0 %
-
Communication interface
IO-Link ✔ , COM2 (38,4 kBaud) Data transmission rate COM2 (38,4 kBaud) Cycle time 2.3 ms Process data length 16 Bit Process data structure Bit 0 = switching signal QL1 Bit 1 = switching signal QL2 Bit 2 … 15 = empty VendorID 26 DeviceID HEX 0x800127 DeviceID DEC 8388903
-
Electrical data
Supply voltage UB 10 V DC … 30 V DC 1) Ripple < 5 Vpp 2) Current consumption 20 mA 3) Protection class III Digital output Type PNP Output current Imax. ≤ 100 mA Repeatability (response time) 150 µs 4) Switching frequency 1,000 Hz Switching mode Light/dark switching Circuit protection A 5)
B 6)
C 7)
D 8)
Response time Q/ on Pin 2 300 µs … 450 µs 4) 9) Switching frequency Q / to pin 2 1,000 Hz 10) - 1) Limit values when operated in short-circuit protected network: max. 8 A.
- 2) May not exceed or fall below Uv tolerances.
- 3) Without load.
- 4) Valid for Q on Pin2, if configured with software.
- 5) A = VS connections reverse-polarity protected.
- 6) B = inputs and output reverse-polarity protected.
- 7) C = interference suppression.
- 8) D = outputs overcurrent and short-circuit protected.
- 9) Signal transit time with resistive load.
- 10) With light / dark ratio 1:1, valid for Q on Pin2, if configured with software.
-
Mechanical data
Housing Rectangular Design detail Slim Dimensions (W x H x D) 12.2 mm x 41.8 mm x 17.3 mm Connection Male connector M8, 4-pin Material Housing Plastic, ABS Front screen Plastic, PMMA Weight 30 g
-
Ambient data
Enclosure rating IP67
IP66
Ambient operating temperature –40 °C … +60 °C Ambient temperature, storage –40 °C … +75 °C UL File No. NRKH.E181493 & NRKH7.E181493
-
Smart Task
Smart Task name Base logics Logic function Direct
AND
OR
WINDOW
Hysteresis
Timer function Deactivated
On delay
Off delay
ON and OFF delay
Impulse (one shot)
Inverter Yes Switching frequency SIO Direct: 1000 Hz
SIO Logic: 1000 Hz
IOL: 900 Hz
Response time SIO Direct: 300 µs … 450 µs 1)
SIO Logic: 500 µs … 600 µs 2)
IOL: 500 µs … 900 µs 3)
Repeatability SIO Direct: 150 µs 1)
SIO Logic: 150 µs 2)
IOL: 400 µs 3)
Switching signal Switching signal QL1 Switching signal Switching signal QL2 Switching signal - 1) SIO Direct: sensor operation in standard I/O mode without IO-Link communication and without using internal sensor logic or time parameters (set to “direct”/”deactivated”).
- 2) SIO Logic: Sensor operation in standard I/O mode without IO-Link communication. Sensor-internal logic or timing parameters plus Automation Functions used.
- 3) IOL: Sensor operation with full IO-Link communication and usage of logic, timing and Automation Function parameters.
-
Diagnosis
Device status Yes Quality of teach Yes Quality of run Yes, Contamination display
-
Classifications
eCl@ss 5.0 27270902 eCl@ss 5.1.4 27270902 eCl@ss 6.0 27270902 eCl@ss 6.2 27270902 eCl@ss 7.0 27270902 eCl@ss 8.0 27270902 eCl@ss 8.1 27270902 eCl@ss 9.0 27270902 eCl@ss 10.0 27270902 eCl@ss 11.0 27270902 eCl@ss 12.0 27270902 ETIM 5.0 EC002717 ETIM 6.0 EC002717 ETIM 7.0 EC002717 ETIM 8.0 EC002717 UNSPSC 16.0901 39121528