DT1000-S11112

Long range distance sensors
Dx1000 / DT1000

sản phẩm chính hãng, MỚI 100% CHƯA SỬ DỤNG
SẢN PHẨM LUÔN ĐƯỢC KIỂM TRA TRƯỚC KHI XUẤT KHO
BẢO HÀNH 12 THÁNG ĐỐI VỚI LỖI CỦA NHÀ SẢN XUẤT / HOẶC THEO CHÍNH SÁCH CỦA SẢN PHẨM DO TRƯỜNG THỊNH PHÂN PHỐI
HỖ TRỢ KỸ THUẬT 24/7
MIỄN PHÍ GIAO HÀNG ĐỐI VỚI CÁC ĐƠN HÀNG TỪ 8,000,000VNĐ

SKU: DT1000-S11112 Danh mục: Long range distance sensors Thẻ: 1097425, DT1000-S11112

Mechanics/electronics

Supply voltage V_s	DC 18 V … 30 V, reverse polarity protected
Ripple	≤ 5 V_pp ¹⁾
Power consumption	≤ 22 W, With heating switched off ²⁾ ≤ 35 W, With heating switched on ²⁾
Initialization time	> 30 s
Housing material	Metal (Aluminum alloy (AlSi12))
Window material	Glass
Connection type	Round connector M12 x 1
Indication	Graphical, resistive touch display, status LEDs
Weight	1,000 g
Dimensions (W x H x D)	84 mm x 104.4 mm x 140.5 mm
Enclosure rating	IP65 ³⁾ IP67 ³⁾
Protection class	III (EN 61140)

Performance

Measurement principle	HDDM⁺
Measuring range	0.2 m … 155 m, 6 % remission ¹⁾ ²⁾ ³⁾ 0.2 m … 460 m, 90 % remission ¹⁾ ²⁾ ³⁾
Target	Natural objects
Resolution	0.001 mm … 100 mm, adjustable ⁴⁾
Repeatability	≥ 1 mm, See repeatability characteristic lines ¹⁾ ⁵⁾ ⁶⁾ ⁷⁾
Accuracy	Typ. ± 15 mm ⁸⁾ ⁹⁾
Response time	3 ms … 384 ms ⁷⁾
Measurement cycle time	1 ms 4 ms 16 ms 64 ms 128 ms
Output time	≥ 1 ms ¹⁰⁾
Light source	Infrared light (905 nm, measuring laser) Visible red light (650 nm, Adjustment aid)
Laser class	1, even with simultaneous operation of measurement and alignment laser (IEC 60825-1:2014, EN 60825-1:2014)
Typ. light spot size (distance)	5 mm x 20 mm (at 1 m) ¹¹⁾ 20 mm x 20 mm (at 5 m) ¹¹⁾ 35 mm x 25 mm (at 10 m) ¹¹⁾ 150 mm x 50 mm (at 50 m) ¹¹⁾ 290 mm x 80 mm (at 100 m) ¹¹⁾ 570 mm x 140 mm (at 200 m) ¹¹⁾
Filter	Rain and snow filter Fog filter Moving average distance value Kalman filter Moving average speed value
Max. object temperature	+1,400 °C ¹²⁾
Additional function	Selection of relevant distance and signal level range, Selection of first or last echo in selected distance and signal level range
Average laser service life (at 25 °C)	100,000 h ¹³⁾
Max. movement speed	128 m/s

¹⁾ With max. ambient light 100 kLux sunlight.
²⁾ See measuring range diagram.
³⁾ Dependent on remission and measuring cycle time.
⁴⁾ Data interface resolution.
⁵⁾ Statistical error 1 σ, environmental conditions constant, min. warm-up time > about 15 min.
⁶⁾ 6 % … 90 % remission.
⁷⁾ Dependent on selected filter settings and measuring cycle time.
⁸⁾ See measurement accuracy diagram.
⁹⁾ At T = +23 °C and after warm-up time > about 15 min.
¹⁰⁾ Depending on interface used.
¹¹⁾ See light spot size diagram.
¹²⁾ For object temperatures > +1,200 °C, the use of the additional filter is required for high-temperature applications. The additional filter reduces the measuring range limit by approx. 25%.
¹³⁾ Measuring laser.

Interfaces

Ethernet	✔ , TCP/IP
Function	Parameterization, output of measurement data
Data transmission rate	10/100 MBit/s

Serial	✔ , RS-422
Remark	Switchable to SSI

PROFINET	✔
Function	Parameterization, output of measurement data

Network load class

III

Inputs/outputs
In1/Q1	Digital input, digital output (Switchable)
QA/Q2	Analog output, digital output (Switchable)

Digital input

Internal pull-down circuit
HIGH switching voltage: min. 13 V … max. supply voltage

LOW switching voltage: max. 5 V

Switching functions: deactivate measuring laser, activate alignment laser, preset

¹⁾ Short-circuit protected, switching voltage U_V – 4 V.
²⁾ Internal pull-down switching, switching voltage HIGH: min. 13 V … max. supply voltage, switching voltage LOW: max. 5 V.
³⁾ Max. load = (U_v– 7 V) / 21.5 mA.

Ambient data

Ambient temperature, operation	–40 °C … +55 °C ¹⁾ –40 °C … +95 °C, operation with cooling case
Ambient temperature, storage	–40 °C … +75 °C
Max. rel. humidity (not condensing)	≤ 95 %
Effect of air pressure	0.3 ppm/hPa
Effect of air temperature	–1 ppm/K
Temperature drift	Typ. 0.25 mm/K
Typ. Ambient light immunity	≤ 100,000 lx
Mechanical load	Shock: 30 g / 6 ms according to DIN EN 60068-2-27 (Ea), 6 axes Continuous shock: 25 g / 6 ms according to DIN EN 60068-2-27 (fatigue), 500 shocks, 6 axes

¹⁾ At a temperature of –40 °C, a warm-up time of typ. 20 minutes is required (when supply voltage V_s = 24 V).

Classifications