EASY800-BLT-ADP 167651 EATON ELECTRIC Bluetooth Adapter, communication easy800/MFD-CP8/CP10/EC4P with PC, pl..
EASY800-BLT-ADP 167651 EATON ELECTRIC Bluetooth Adapter, communication easy800/MFD-CP8/CP10/EC4P with PC, pl..
Bluetooth Adapter, communication easy800/MFD-CP8/CP10/EC4P with PC, plug-in
Liên hệ:
Bluetooth adapter for radio connection between the PC and 800 IEC8-10-4, V2.0 EDR conform, 4 dBm, PIN code-based secure connection, range approx. 10 m
Product range
Control relay easyRelay
Multi-function-display MFD-Titan
Multi-function-display MFD-Titan
Subrange
Programming accessories
Cables, component adapters and plugs
Cables, component adapters and plugs
Function
For secure radio connection between control relay and PC (programming and online communication)/Android smartphone and tablet (easyRemote display app, easyParameter app)
For use with
easy81…, easy82…
MFD-CP8, MFD-CP10 ≧ V. 3.0
EC4P
MFD-CP8, MFD-CP10 ≧ V. 3.0
EC4P
radio interface
Bluetooth module used
easy800-BLT-ADP 02, 03: PAN1321 SPP, ENW89811K4CF
easy800-BLT-ADP 04: PAN1322 SPP, ENW89841A3KF
easy800-BLT-ADP 04: PAN1322 SPP, ENW89841A3KF
BlueTooth [Version]
2.0, EDR conform
Transmitting powerOutput level
typ. 2.5 mW
Transmitting powerOutput power
typ. 4 dBm
Transmitting powerClass
2
Transmitting powerTransission mode
easy800-BLT-ADP 02, 03 secure connection using PIN code
easy800-BLT-ADP 04 secure connection using secure simple pairing
easy800-BLT-ADP 04 secure connection using secure simple pairing
Transmitting powerBaud rate
57600 Bd
Transmitting powerRange
10 m
Communications partners [Count]
max. 4
Communications partners [Type]
PC
Control relay easyRelay
Multi-function-display MFD-Titan
Multi-function-display MFD-Titan
Subrange
Programming accessories
Cables, component adapters and plugs
Cables, component adapters and plugs
Programming accessories
Cables, component adapters and plugs
Cables, component adapters and plugs
For secure radio connection between control relay and PC (programming and online communication)/Android smartphone and tablet (easyRemote display app, easyParameter app)
easy81…, easy82…
MFD-CP8, MFD-CP10 ≧ V. 3.0
EC4P
MFD-CP8, MFD-CP10 ≧ V. 3.0
EC4P
radio interface
easy800-BLT-ADP 02, 03: PAN1321 SPP, ENW89811K4CF
easy800-BLT-ADP 04: PAN1322 SPP, ENW89841A3KF
easy800-BLT-ADP 04: PAN1322 SPP, ENW89841A3KF
2.0, EDR conform
typ. 2.5 mW
typ. 4 dBm
2
easy800-BLT-ADP 02, 03 secure connection using PIN code
easy800-BLT-ADP 04 secure connection using secure simple pairing
easy800-BLT-ADP 04 secure connection using secure simple pairing
57600 Bd
10 m
max. 4
PC
General
Standards
EN 55011, EN 50178, IEC EN 61000-4, IEC60068-2-6, IEC60068-2-27
Dimensions (W x H x D)
15 x 45 x 17 mm
Weight
0.08 kg
Mounting
Can be plugged into the easy800-Standard, MFD‑CP8/CP10, EC4P serial interface
Climatic proofing
Cold to EN 60068-2-1
Heat to IEC 60068-2-2
Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Temperature change as per IEC 68000-2-14
Heat to IEC 60068-2-2
Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Temperature change as per IEC 68000-2-14
Operating ambient temperature
–25 to +55 (–13 to +131) °C
Condensation
Take appropriate measures to prevent condensation
Storage [ϑ]
–40 to +70, (–40 to +158) °C
relative humidity
5 – 95 %
Air pressure (operation)
795 – 1080 hPa
Ambient conditions, mechanical
Protection type (IEC/EN 60529, EN50178, VBG 4)
IP20
Vibrations [3,5 mm / 1 g]
constant amplitude 3,5 mm: 5 – 8,4
constant acceleration 1 g: 8,4 – 150 Hz
constant acceleration 1 g: 8,4 – 150 Hz
Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms
18 Impacts
Drop to IEC/EN 60068-2-31 [Drop height]
50 mm
Free fall, packaged (IEC/EN 60068-2-32)
0.3 m
Mounting position
Any, depends on the device’s position
Electromagnetic compatibility (EMC)
Electrostatic discharge (ESD)applied standard
IEC EN 61000-4-3
Electrostatic discharge (ESD)Air discharge
8 kV
Electrostatic discharge (ESD)Contact discharge
6 kV
Electromagnetic fields (RFI) to IEC EN 61000-4-3
0.8 – 1.0 GHz: 10
1.4 – 2 GHz: 3
2.0 – 2.7 GHz: 1 V/m
1.4 – 2 GHz: 3
2.0 – 2.7 GHz: 1 V/m
Radio interference suppression
Class B
Burst
2 kV
Immunity to line-conducted interference to (IEC/EN 61000-4-6)
10 V
Insulation resistance
Pollution degree
2
radio interface
Radio licenses and certifications
easy800-BLT-ADP 02, 03 for ENW89811K4C
easy800-BLT-ADP 04 for ENW89841A3KF
R&TTE 1999/5/EC (part of CE Declaration of Conformity)
FCC ID: T7VEBMU (USA)
IC: 216QEBMU (Canada)
easy800-BLT-ADP 04 for ENW89841A3KF
R&TTE 1999/5/EC (part of CE Declaration of Conformity)
FCC ID: T7VEBMU (USA)
IC: 216QEBMU (Canada)
BlueTooth [Version]
2.0, EDR conform
Bluetooth module used
easy800-BLT-ADP 02, 03: PAN1321 SPP, ENW89811K4CF
easy800-BLT-ADP 04: PAN1322 SPP, ENW89841A3KF
easy800-BLT-ADP 04: PAN1322 SPP, ENW89841A3KF
Coupling time
60 Sekunden für Secure Simple Pairing
Transmitting power
Output level
typ. 2.5 mW
Output power
typ. 4 dBm
Transission mode
easy800-BLT-ADP 02, 03 secure connection using PIN code
easy800-BLT-ADP 04 secure connection using secure simple pairing
easy800-BLT-ADP 04 secure connection using secure simple pairing
Baud rate
57600 Bd
Range
10 m
Number of computers that can be connected
4
Standards
EN 55011, EN 50178, IEC EN 61000-4, IEC60068-2-6, IEC60068-2-27
EN 55011, EN 50178, IEC EN 61000-4, IEC60068-2-6, IEC60068-2-27
15 x 45 x 17 mm
0.08 kg
Mounting
Can be plugged into the easy800-Standard, MFD‑CP8/CP10, EC4P serial interface
Can be plugged into the easy800-Standard, MFD‑CP8/CP10, EC4P serial interface
Cold to EN 60068-2-1
Heat to IEC 60068-2-2
Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Temperature change as per IEC 68000-2-14
Heat to IEC 60068-2-2
Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Temperature change as per IEC 68000-2-14
–25 to +55 (–13 to +131) °C
Take appropriate measures to prevent condensation
–40 to +70, (–40 to +158) °C
5 – 95 %
795 – 1080 hPa
IP20
constant amplitude 3,5 mm: 5 – 8,4
constant acceleration 1 g: 8,4 – 150 Hz
constant acceleration 1 g: 8,4 – 150 Hz
18 Impacts
50 mm
0.3 m
Any, depends on the device’s position
IEC EN 61000-4-3
8 kV
6 kV
0.8 – 1.0 GHz: 10
1.4 – 2 GHz: 3
2.0 – 2.7 GHz: 1 V/m
1.4 – 2 GHz: 3
2.0 – 2.7 GHz: 1 V/m
Class B
2 kV
10 V
2
easy800-BLT-ADP 02, 03 for ENW89811K4C
easy800-BLT-ADP 04 for ENW89841A3KF
R&TTE 1999/5/EC (part of CE Declaration of Conformity)
FCC ID: T7VEBMU (USA)
IC: 216QEBMU (Canada)
easy800-BLT-ADP 04 for ENW89841A3KF
R&TTE 1999/5/EC (part of CE Declaration of Conformity)
FCC ID: T7VEBMU (USA)
IC: 216QEBMU (Canada)
2.0, EDR conform
easy800-BLT-ADP 02, 03: PAN1321 SPP, ENW89811K4CF
easy800-BLT-ADP 04: PAN1322 SPP, ENW89841A3KF
easy800-BLT-ADP 04: PAN1322 SPP, ENW89841A3KF
60 Sekunden für Secure Simple Pairing
typ. 2.5 mW
typ. 4 dBm
easy800-BLT-ADP 02, 03 secure connection using PIN code
easy800-BLT-ADP 04 secure connection using secure simple pairing
easy800-BLT-ADP 04 secure connection using secure simple pairing
57600 Bd
10 m
4
Design verification as per IEC/EN 61439
Technical data for design verification
Operating ambient temperature min.
-25 °C
Operating ambient temperature max.
+55 °C
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard’s requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard’s requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard’s requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard’s requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard’s requirements.
10.2 Strength of materials and parts10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard’s requirements.
10.3 Degree of protection of ASSEMBLIES
Meets the product standard’s requirements.
10.4 Clearances and creepage distances
Meets the product standard’s requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder’s responsibility.
10.8 Connections for external conductors
Is the panel builder’s responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Is the panel builder’s responsibility.
10.9 Insulation properties10.9.3 Impulse withstand voltage
Is the panel builder’s responsibility.
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Is the panel builder’s responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder’s responsibility.
10.12 Electromagnetic compatibility
Is the panel builder’s responsibility.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Technical data for design verification
Operating ambient temperature min.
-25 °C
Operating ambient temperature max.
+55 °C
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard’s requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard’s requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard’s requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard’s requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard’s requirements.
10.2 Strength of materials and parts10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard’s requirements.
10.3 Degree of protection of ASSEMBLIES
Meets the product standard’s requirements.
10.4 Clearances and creepage distances
Meets the product standard’s requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder’s responsibility.
10.8 Connections for external conductors
Is the panel builder’s responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Is the panel builder’s responsibility.
10.9 Insulation properties10.9.3 Impulse withstand voltage
Is the panel builder’s responsibility.
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Is the panel builder’s responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder’s responsibility.
10.12 Electromagnetic compatibility
Is the panel builder’s responsibility.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Operating ambient temperature min.
-25 °C
-25 °C
+55 °C
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard’s requirements.
Meets the product standard’s requirements.
Meets the product standard’s requirements.
Meets the product standard’s requirements.
Meets the product standard’s requirements.
Meets the product standard’s requirements.
Does not apply, since the entire switchgear needs to be evaluated.
Does not apply, since the entire switchgear needs to be evaluated.
Meets the product standard’s requirements.
Meets the product standard’s requirements.
Meets the product standard’s requirements.
Does not apply, since the entire switchgear needs to be evaluated.
Does not apply, since the entire switchgear needs to be evaluated.
Is the panel builder’s responsibility.
Is the panel builder’s responsibility.
Is the panel builder’s responsibility.
Is the panel builder’s responsibility.
Is the panel builder’s responsibility.
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Is the panel builder’s responsibility.
Is the panel builder’s responsibility.
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
PLC’s (EG000024) / PLC communication module (EC001423)
Electric engineering, automation, process control engineering / Control / Programmable logic control (SPS) / SPS communication module ([email protected] [AKE531014])
Number of HW-interfaces industrial Ethernet
0
Number of interfaces PROFINET
0
Number of HW-interfaces RS-232
0
Number of HW-interfaces RS-422
0
Number of HW-interfaces RS-485
0
Number of HW-interfaces serial TTY
0
Number of HW-interfaces USB
0
Number of HW-interfaces parallel
0
Number of HW-interfaces Wireless
1
Number of HW-interfaces other
0
With optical interface
No
Supporting protocol for TCP/IP
No
Supporting protocol for PROFIBUS
No
Supporting protocol for CAN
No
Supporting protocol for INTERBUS
No
Supporting protocol for ASI
No
Supporting protocol for KNX
No
Supporting protocol for MODBUS
No
Supporting protocol for Data-Highway
No
Supporting protocol for DeviceNet
No
Supporting protocol for SUCONET
No
Supporting protocol for LON
No
Supporting protocol for PROFINET IO
No
Supporting protocol for PROFINET CBA
No
Supporting protocol for SERCOS
No
Supporting protocol for Foundation Fieldbus
No
Supporting protocol for EtherNet/IP
No
Supporting protocol for AS-Interface Safety at Work
No
Supporting protocol for DeviceNet Safety
No
Supporting protocol for INTERBUS-Safety
No
Supporting protocol for PROFIsafe
No
Supporting protocol for SafetyBUS p
No
Supporting protocol for other bus systems
No
Radio standard Bluetooth
Yes
Radio standard WLAN 802.11
No
Radio standard GPRS
No
Radio standard GSM
No
Radio standard UMTS
No
IO link master
No
Redundancy
No
Type of data transmission
Serial
Transmission rate
57.6 kBit/s
With potential separation
Yes
Category according to EN 954-1
SIL according to IEC 61508
None
Suitable for safety functions
No
Performance level acc. EN ISO 13849-1
None
Appendant operation agent (Ex ia)
No
Appendant operation agent (Ex ib)
No
Explosion safety category for gas
None
Explosion safety category for dust
None
Width
15 mm
Height
45 mm
Depth
17 mm
Electric engineering, automation, process control engineering / Control / Programmable logic control (SPS) / SPS communication module ([email protected] [AKE531014])
0
0
Number of HW-interfaces RS-232
0
0
0
0
0
0
0
1
0
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Yes
No
No
No
No
No
No
Serial
57.6 kBit/s
Yes
None
No
None
No
No
None
None
15 mm
45 mm
17 mm
Product Standards
IEC/EN: see Technical Data; UL508; CSA-C22.2; CE marking
UL File No.
E135462
IEC/EN: see Technical Data; UL508; CSA-C22.2; CE marking
UL File No.
E135462
E135462
Sản phẩm tương tự
Modular Switchgear – Big Home
PLS6-C50/3-MW 242954 EATON ELECTRIC Over current switch, 50A, 3 p, type C characteristic
Modular Switchgear – Big Home
PLS6-C4/3N-MW 243010 EATON ELECTRIC Over current switch, 4A, 3pole+N, type C characteristic
Modular Switchgear – Big Home
PLS6-C40/4-MW 243091 EATON ELECTRIC Over current switch, 40A, 4 p, type C characteristic
Modular Switchgear – Big Home
PLS6-C10/4-MW 243083 EATON ELECTRIC Over current switch, 10A, 4 p, type C characteristic
Modular Switchgear – Big Home
PLS6-C50/3N-MW 243023 EATON ELECTRIC Over current switch, 50A, 3pole+N, type C characteristic
Modular Switchgear – Big Home
HN-C16/3 194891 EATON ELECTRIC Residential magnetothermic int., 3P, C-curve, 16A
Modular Switchgear – Big Home
PLS6-C63/4-MW 243093 EATON ELECTRIC Over current switch, 63A, 4 p, type C characteristic
Modular Switchgear – Big Home
PLS6-C40/3N-MW 243022 EATON ELECTRIC Over current switch, 40A, 3pole+N, type C characteristic
