PLZ6-D1,6/1N-MW 242821 EATON ELECTRIC Over current switch, 1, 6 A, 1pole+N, type D characteristic

Over current switch, 1, 6 A, 1pole+N, type D characteristic

sản phẩm chính hãng, MỚI 100% CHƯA SỬ DỤNG
SẢN PHẨM LUÔN ĐƯỢC KIỂM TRA TRƯỚC KHI XUẤT KHO
BẢO HÀNH 12 THÁNG ĐỐI VỚI LỖI CỦA NHÀ SẢN XUẤT / HOẶC THEO CHÍNH SÁCH CỦA SẢN PHẨM DO TRƯỜNG THỊNH PHÂN PHỐI
HỖ TRỢ KỸ THUẬT 24/7
MIỄN PHÍ GIAO HÀNG ĐỐI VỚI CÁC ĐƠN HÀNG TỪ 8,000,000VNĐ

Liên hệ:

SKU: 242821 Danh mục: Modular Switchgear - Tertiary Thẻ: 242821, 6/1N-MW, EATON-MOELLER, PLZ6-D1

Mô tả

Miniature circuit breaker (MCB) PLZ6, 1 pole+N, Tripping characteristic: D, Rated current In: 1.6 A, Rated switching capacity according to IEC/EN 60898-1: 6 kA, Switchgear for residential and commercial applications

Basic function

Miniature circuit-breakers

Number of poles

1 pole+N

Tripping characteristic

Application

Switchgear for residential and commercial applications

Rated current [I_n]

1.6 A

Rated switching capacity according to IEC/EN 60898-1 [I_cn]

6 kA

Product range

PLZ6

Miniature circuit-breakers

Number of poles

1 pole+N

Switchgear for residential and commercial applications

Rated current [I_n]

1.6 A

6 kA

PLZ6

Electrical

Rated switching capacity according to IEC/EN 60898-1 [I_cn]

6 kA

Rated switching capacity according to IEC/EN 60898-1 [I_cn]

6 kA

Design verification as per IEC/EN 61439

Technical data for design verification

Rated operational current for specified heat dissipation [I_n]

1.6 A

Heat dissipation per pole, current-dependent [P_vid]

0 W

Equipment heat dissipation, current-dependent [P_vid]

1.4 W

Static heat dissipation, non-current-dependent [P_vs]

0 W

Heat dissipation capacity [P_diss]

0 W

Operating ambient temperature min.

-25 °C

Operating ambient temperature max.

+75 °C

linear, per +1 °C, results in a 0.5% reduction of current carrying capacity

IEC/EN 61439 design verification

10.2 Strength of materials and parts10.2.2 Corrosion resistance

Meets the product standard’s requirements.

10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures

Meets the product standard’s requirements.

10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat

Meets the product standard’s requirements.

10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects

Meets the product standard’s requirements.

10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation

Meets the product standard’s requirements.

10.2 Strength of materials and parts10.2.5 Lifting

Does not apply, since the entire switchgear needs to be evaluated.

10.2 Strength of materials and parts10.2.6 Mechanical impact

Does not apply, since the entire switchgear needs to be evaluated.

10.2 Strength of materials and parts10.2.7 Inscriptions

Meets the product standard’s requirements.

10.3 Degree of protection of ASSEMBLIES

Does not apply, since the entire switchgear needs to be evaluated.

10.4 Clearances and creepage distances

Meets the product standard’s requirements.

10.5 Protection against electric shock

Does not apply, since the entire switchgear needs to be evaluated.

10.6 Incorporation of switching devices and components

Does not apply, since the entire switchgear needs to be evaluated.

10.7 Internal electrical circuits and connections

Is the panel builder’s responsibility.

10.8 Connections for external conductors

Is the panel builder’s responsibility.

10.9 Insulation properties10.9.2 Power-frequency electric strength

Is the panel builder’s responsibility.

10.9 Insulation properties10.9.3 Impulse withstand voltage

Is the panel builder’s responsibility.

10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material

Is the panel builder’s responsibility.

10.10 Temperature rise

The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.

10.11 Short-circuit rating

Is the panel builder’s responsibility. The specifications for the switchgear must be observed.

10.12 Electromagnetic compatibility

Is the panel builder’s responsibility. The specifications for the switchgear must be observed.

10.13 Mechanical function

The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Technical data for design verification

Rated operational current for specified heat dissipation [I_n]

1.6 A

Heat dissipation per pole, current-dependent [P_vid]

0 W

Equipment heat dissipation, current-dependent [P_vid]

1.4 W

Static heat dissipation, non-current-dependent [P_vs]

0 W

Heat dissipation capacity [P_diss]

0 W

Operating ambient temperature min.

-25 °C

Operating ambient temperature max.

+75 °C

linear, per +1 °C, results in a 0.5% reduction of current carrying capacity

IEC/EN 61439 design verification

10.2 Strength of materials and parts10.2.2 Corrosion resistance

Meets the product standard’s requirements.

10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures

Meets the product standard’s requirements.

10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat

Meets the product standard’s requirements.

10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects

Meets the product standard’s requirements.

10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation

Meets the product standard’s requirements.

10.2 Strength of materials and parts10.2.5 Lifting

Does not apply, since the entire switchgear needs to be evaluated.

10.2 Strength of materials and parts10.2.6 Mechanical impact

Does not apply, since the entire switchgear needs to be evaluated.

10.2 Strength of materials and parts10.2.7 Inscriptions

Meets the product standard’s requirements.

10.3 Degree of protection of ASSEMBLIES

Does not apply, since the entire switchgear needs to be evaluated.

10.4 Clearances and creepage distances

Meets the product standard’s requirements.

10.5 Protection against electric shock

Does not apply, since the entire switchgear needs to be evaluated.

10.6 Incorporation of switching devices and components

Does not apply, since the entire switchgear needs to be evaluated.

10.7 Internal electrical circuits and connections

Is the panel builder’s responsibility.

10.8 Connections for external conductors

Is the panel builder’s responsibility.

10.9 Insulation properties10.9.2 Power-frequency electric strength

Is the panel builder’s responsibility.

10.9 Insulation properties10.9.3 Impulse withstand voltage

Is the panel builder’s responsibility.

10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material

Is the panel builder’s responsibility.

10.10 Temperature rise

The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.

10.11 Short-circuit rating

Is the panel builder’s responsibility. The specifications for the switchgear must be observed.

10.12 Electromagnetic compatibility

Is the panel builder’s responsibility. The specifications for the switchgear must be observed.

10.13 Mechanical function

The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Rated operational current for specified heat dissipation [I_n]

1.6 A

0 W

1.4 W

Static heat dissipation, non-current-dependent [P_vs]

0 W

-25 °C

+75 °C

linear, per +1 °C, results in a 0.5% reduction of current carrying capacity

Meets the product standard’s requirements.

Does not apply, since the entire switchgear needs to be evaluated.

Meets the product standard’s requirements.

Does not apply, since the entire switchgear needs to be evaluated.

Meets the product standard’s requirements.

Does not apply, since the entire switchgear needs to be evaluated.

Is the panel builder’s responsibility.

The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.

Is the panel builder’s responsibility. The specifications for the switchgear must be observed.

The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Circuit breakers and fuses (EG000020) / Miniature circuit breaker (MCB) (EC000042)

Electric engineering, automation, process control engineering / Electrical installation, device / Miniature circuit breaker system (MCB) / Miniature circuit breaker (MCB) ([email protected] [AAB905014])

Release characteristic

Number of poles (total)

Number of protected poles

Rated current

1.6 A

Rated voltage

230 V

Rated insulation voltage Ui

440 V

Rated impulse withstand voltage Uimp

4 kV

Rated short-circuit breaking capacity Icn EN 60898 at 230 V

6 kA

Rated short-circuit breaking capacity Icn EN 60898 at 400 V

6 kA

Rated short-circuit breaking capacity Icu IEC 60947-2 at 230 V

0 kA

Rated short-circuit breaking capacity Icu IEC 60947-2 at 400 V

0 kA

Voltage type

Frequency

50 – 60 Hz

Current limiting class

Suitable for flush-mounted installation

Concurrently switching N-neutral

Yes

Over voltage category

Pollution degree

Additional equipment possible

Yes

Width in number of modular spacings

Built-in depth

70.5 mm

Degree of protection (IP)

IP20

Ambient temperature during operating

-25 – 55 °C

Connectable conductor cross section multi-wired

1 – 25 mm²

Connectable conductor cross section solid-core

1 – 25 mm²

Number of protected poles

1.6 A

230 V

440 V

4 kV

6 kA

0 kA

50 – 60 Hz

Yes

70.5 mm

IP20

-25 – 55 °C

1 – 25 mm²

MÁY IN CÔNG NGHIỆP

MÁY SẢN XUẤT KHÍ NI-TƠ

MÁY ĐÓNG GÓI

DỊCH VỤ TƯ VẤN

Dịch vụ tư vấn - Khảo sát miễn phí duy nhất tại Trường Thịnh Tech

thi công lắp đặt

Trường Thịnh Tech cung cấp và lắp đặt hoàn thiện dự án

bảo dưỡng định kỳ

Bảo hành - bảo dưỡng với các sản phẩm, dịch vụ do Trường Thịnh Tech cấp ra

THIẾT BỊ

Trường Thịnh cung cấp thiết bị và máy móc trọn gói, đúng chuẩn cho Quý doanh nghiệp

PLZ6-D1,6/1N-MW 242821 EATON ELECTRIC Over current switch, 1, 6 A, 1pole+N, type D characteristic

sản phẩm chính hãng, MỚI 100% CHƯA SỬ DỤNG

SẢN PHẨM LUÔN ĐƯỢC KIỂM TRA TRƯỚC KHI XUẤT KHO

BẢO HÀNH 12 THÁNG ĐỐI VỚI LỖI CỦA NHÀ SẢN XUẤT / HOẶC THEO CHÍNH SÁCH CỦA SẢN PHẨM DO TRƯỜNG THỊNH PHÂN PHỐI

HỖ TRỢ KỸ THUẬT 24/7

MIỄN PHÍ GIAO HÀNG ĐỐI VỚI CÁC ĐƠN HÀNG TỪ 8,000,000VNĐ

Liên hệ:

Design verification as per IEC/EN 61439

MÁY IN CÔNG NGHIỆP

MÁY SẢN XUẤT KHÍ NI-TƠ

MÁY ĐÓNG GÓI

DỊCH VỤ TƯ VẤN

Dịch vụ tư vấn - Khảo sát miễn phí duy nhất tại Trường Thịnh Tech

thi công lắp đặt

Trường Thịnh Tech cung cấp và lắp đặt hoàn thiện dự án

bảo dưỡng định kỳ

Bảo hành - bảo dưỡng với các sản phẩm, dịch vụ do Trường Thịnh Tech cấp ra

THIẾT BỊ

Trường Thịnh cung cấp thiết bị và máy móc trọn gói, đúng chuẩn cho Quý doanh nghiệp

PLZ6-D1,6/1N-MW 242821 EATON ELECTRIC Over current switch, 1, 6 A, 1pole+N, type D characteristic

sản phẩm chính hãng, MỚI 100% CHƯA SỬ DỤNG

SẢN PHẨM LUÔN ĐƯỢC KIỂM TRA TRƯỚC KHI XUẤT KHO

BẢO HÀNH 12 THÁNG ĐỐI VỚI LỖI CỦA NHÀ SẢN XUẤT / HOẶC THEO CHÍNH SÁCH CỦA SẢN PHẨM DO TRƯỜNG THỊNH PHÂN PHỐI

HỖ TRỢ KỸ THUẬT 24/7

MIỄN PHÍ GIAO HÀNG ĐỐI VỚI CÁC ĐƠN HÀNG TỪ 8,000,000VNĐ

Liên hệ:

Design verification as per IEC/EN 61439

Sản phẩm tương tự

Đăng nhập