Key Commercial Data
Orderkey | 2904335 |
---|---|
Packing unit | 1 pc |
Note | Made to Order (non-returnable) |
Catalog page | Page 33 (C-5-2017) |
GTIN | 4046356802857 |
Weight per Piece (excluding packing) | 350.000 g |
Custom tariff number | 85371098 |
Country of origin | DE (Germany) |
Device supply
Rated control circuit supply voltage US | 24 V DC |
---|---|
Control supply voltage range | 19.2 V DC … 30 V DC |
Rated control supply current IS | 40 mA |
Type of protection | Surge protection |
Reverse polarity protection |
Input data
Input name | Control input right/left |
---|---|
Rated actuating voltage UC | 24 V DC |
Triggering voltage range | 19.2 V DC … 30 V DC |
Rated actuating current IC | 5 mA |
Switching threshold | 9.6 V (“0” signal) |
19.2 V (“1” signal) | |
Switching level | < 5 V DC (For EMERGENCY STOP) |
Typical turn-off time | < 30 ms |
Output data load output
Output name | AC output |
---|---|
Rated operating voltage Ue | 500 V AC |
Operating voltage range | 42 V AC … 550 V AC |
Mains frequency | 50/60 Hz |
Load current range | 180 mA … 2.4 A |
Trigger characteristic in acc. with IEC 60947-4-2 | Class 10A |
Cooling time | 20 min. (for auto reset) |
Leakage current | 0 mA |
Type of protection | Surge protection |
Short-circuit protection |
Output data reply output
Output name | Acknowledge output |
---|---|
Note | Confirmation: floating change-over contact, signal contact |
Contact type | 1 PDT |
Switching capacity according to IEC 60947-5-1 | 3 A (230 V, AC15) |
2 A (24 V, DC13) |
General
Switching frequency | ≤ 2 Hz (Load-dependent) |
---|---|
Mounting position | vertical (horizontal DIN rail, motor output below) |
Mounting type | Bus bar mounting |
Assembly instructions | alignable, for spacing see derating |
Operating mode | 100% operating factor |
Maximum power dissipation | 4.1 W |
Minimum power dissipation | 0.88 W |
Operating voltage display | Green LED |
Status display | Yellow LED |
Indication | Red LED |