CABLE-FLK50/OE/0,14/2000/S 2909784 PHOENIX CONTACT Assembled shielded round cable connection 1: IDC/FLK sock..

Assembled shielded round cable; connection 1: IDC/FLK socket strip (1x 50-position); connection 2: Single wires (50-position) (The wires are marked and fitted with ferrules.); cable length: 20 m

sản phẩm chính hãng, MỚI 100% CHƯA SỬ DỤNG
SẢN PHẨM LUÔN ĐƯỢC KIỂM TRA TRƯỚC KHI XUẤT KHO
BẢO HÀNH 12 THÁNG ĐỐI VỚI LỖI CỦA NHÀ SẢN XUẤT / HOẶC THEO CHÍNH SÁCH CỦA SẢN PHẨM DO TRƯỜNG THỊNH PHÂN PHỐI
HỖ TRỢ KỸ THUẬT 24/7
MIỄN PHÍ GIAO HÀNG ĐỐI VỚI CÁC ĐƠN HÀNG TỪ 8,000,000VNĐ

Liên hệ:

Mã: 2909784 Danh mục: INTERFACE Components (IF) Từ khóa: 14/2000/S, 2909784, CABLE-FLK50/OE/0, PHOENIX_CONTACT

Mô tả

Drawings
General
Connection data 2
Supported controller
Classifications

Ambient conditions
Connection data
Standards and Regulations
Environmental Product Compliance

Drawings


Diagram Maximum permissible current per path in uncoiled state

Ambient conditions

Ambient temperature (operation)	-40 °C … 70 °C (fixed installation)
	-10 °C … 70 °C (flexible installation)
Ambient temperature (storage/transport)	-40 °C … 80 °C
Maximum altitude	≤ 2000 m
Degree of protection	IP00
	≥ IP54 (Installation location)

General

Max. permissible operating voltage	25 V AC
	60 V DC
Max. current carrying capacity per path	1 A
Length of cable	20 m
External cable diameter	11 mm ±0,3 mm
Single wire, cross section	0.14 mm²
Single wire, cross section [AWG]	26
Single wire, number of litz wires	7
Single wire, material	Cu tin-plated
Wire diameter incl. insulation	1 mm ±0.03 mm
Smallest bending radius, fixed installation	113 mm
Smallest bending radius, movable installation	203 mm
Bending cycles	5000 (at a radius of ≥ 18x outside diameter)
Cable, preassembly	Insulation displacement, IEC 60352-4/DIN EN 60352-4
Shielding	yes
	Tinned copper-braided shield, approx. 85% covering
Cable insulation resistance	≥ 20 MΩ/km (20 °C)
Cable resistance	≤ 145 Ω/km (at 20 °C)
Outer sheath, material	Semi-rigid PVC
External sheath, color	gray RAL 7035
Nominal operating mode	100% operating factor

Connection data

Connection name	Field level
Connection method	Single wires
Number of positions	48
Note	The wires are marked and fitted with ferrules.

Connection data 2

Connection name	Controller level
Connection in acc. with standard	IEC 60603-13
Connection method	IDC/FLK socket strip
Number of connections	1
Number of positions	50
Insertion/withdrawal cycles	> 50
Pitch	2.54 mm

Standards and Regulations

Flame resistance	UL VW-1
	CSA FT-1
	IEC 60332-1-2
	VDE 0842, Part 332-1-2
	IEC 60332-3-22
Resistance to oil	against occasional splashes
Gasoline resistance	against occasional splashes
Designation	Air clearances and creepage distances
Standards/regulations	DIN EN 50178
Rated insulation voltage	63 V
Rated surge voltage	0.6 kV (1.2/50 μs)
Insulation	Functional insulation
Pollution degree	2
Overvoltage category	II

Supported controller

Controller	universal

Environmental Product Compliance

China RoHS	Environmentally Friendly Use Period = 50 years
	For details about hazardous substances go to tab “Downloads”, Category “Manufacturer’s declaration”

Classifications

[email protected]

[email protected] 5.0	27242200
[email protected] 5.1	27242200
[email protected] 6.0	27249200
[email protected] 7.0	27249205
[email protected] 8.0	27249205
[email protected] 9.0	27242220

ETIM

ETIM 2.0	EC000237
ETIM 3.0	EC000237
ETIM 4.0	EC000237
ETIM 5.0	EC000237
ETIM 6.0	EC000237
ETIM 7.0	EC000237

Drawings
General
Connection data 2
Supported controller
Classifications

Ambient conditions
Connection data
Standards and Regulations
Environmental Product Compliance

Drawings


Diagram Maximum permissible current per path in uncoiled state

General

Max. permissible operating voltage	25 V AC
	60 V DC
Max. current carrying capacity per path	1 A
Length of cable	20 m
External cable diameter	11 mm ±0,3 mm
Single wire, cross section	0.14 mm²
Single wire, cross section [AWG]	26
Single wire, number of litz wires	7
Single wire, material	Cu tin-plated
Wire diameter incl. insulation	1 mm ±0.03 mm
Smallest bending radius, fixed installation	113 mm
Smallest bending radius, movable installation	203 mm
Bending cycles	5000 (at a radius of ≥ 18x outside diameter)
Cable, preassembly	Insulation displacement, IEC 60352-4/DIN EN 60352-4
Shielding	yes
	Tinned copper-braided shield, approx. 85% covering
Cable insulation resistance	≥ 20 MΩ/km (20 °C)
Cable resistance	≤ 145 Ω/km (at 20 °C)
Outer sheath, material	Semi-rigid PVC
External sheath, color	gray RAL 7035
Nominal operating mode	100% operating factor

MÁY IN CÔNG NGHIỆP

MÁY SẢN XUẤT KHÍ NI-TƠ

MÁY ĐÓNG GÓI

DỊCH VỤ TƯ VẤN

Dịch vụ tư vấn - Khảo sát miễn phí duy nhất tại Trường Thịnh Tech

thi công lắp đặt

Trường Thịnh Tech cung cấp và lắp đặt hoàn thiện dự án

bảo dưỡng định kỳ

Bảo hành - bảo dưỡng với các sản phẩm, dịch vụ do Trường Thịnh Tech cấp ra

THIẾT BỊ

Trường Thịnh cung cấp thiết bị và máy móc trọn gói, đúng chuẩn cho Quý doanh nghiệp