PLC-BPT- 12DC/ 1IC/ACT 1090868 PHOENIX CONTACT 14 mm PLC basic terminal block for high switch-on currents wi..

PLC-BPT- 12DC/ 1IC/ACT 1090868 PHOENIX CONTACT 14 mm PLC basic terminal block for high switch-on currents wi..

PLC-BPT- 12DC/ 1IC/ACT 1090868 PHOENIX CONTACT 14 mm PLC basic terminal block for high switch-on currents wi..

14 mm PLC basic terminal block for high switch-on currents with push-in connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, with load return line connection (BB), 1 N/O contact, input voltage: 12 V DC

sản phẩm chính hãng, MỚI 100% CHƯA SỬ DỤNG
SẢN PHẨM LUÔN ĐƯỢC KIỂM TRA TRƯỚC KHI XUẤT KHO
BẢO HÀNH 12 THÁNG ĐỐI VỚI LỖI CỦA NHÀ SẢN XUẤT / HOẶC THEO CHÍNH SÁCH CỦA SẢN PHẨM DO TRƯỜNG THỊNH PHÂN PHỐI
HỖ TRỢ KỸ THUẬT 24/7
MIỄN PHÍ GIAO HÀNG ĐỐI VỚI CÁC ĐƠN HÀNG TỪ 8,000,000VNĐ

Liên hệ:

SKU: 1090868 Danh mục: INTERFACE Components (IF) Thẻ: 1090868, PHOENIX_CONTACT, PLC-BPT- 12DC/ 1IC/ACT

Mô tả

Key Commercial Data

Orderkey	1090868
Packing unit	1 pc
GTIN	4055626902609
Weight per Piece (excluding packing)	0.000 g
Custom tariff number	85366990
Country of origin	DE (Germany)

Drawings
Dimensions
Input data
General
Connection data 2
Environmental Product Compliance

Note
Ambient conditions
Output data
Connection data
Standards and Regulations
Classifications

Drawings


Circuit diagram

Note

Note	Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules.
	The PLC-ATP separating plate should be installed for safe isolation between adjacent modules
	The PLC-ATP separating plate is required at the start and end of every PLC terminal strip.
	The system installer must ensure the touch protection of the product (at voltages > 25 V AC/60 V DC). The product is a built-in device without protection against direct contact.

Dimensions

Width	14 mm
Height	80 mm
Depth	94 mm

Ambient conditions

Ambient temperature (operation)	-40 °C … 60 °C
Ambient temperature (storage/transport)	-40 °C … 85 °C
Maximum altitude	≤ 2000 m
Degree of protection	IP20
	≥ IP54 (Installation location)

Input data

Nominal input voltage U_N	12 V DC
Protective circuit	Damping diode
	Polarity protection diode

Output data

Compatible components	Miniature relay, 2904475 REL-MR- 12DC/1IC, 1081616 REL-MR- 12DC/1ICT

General

Color	gray
Operating mode	100% operating factor
Mounting position	any
Assembly instructions	In rows with zero spacing
Test voltage relay winding/relay contact	4 kV_rms(50 Hz, 1 min.)

Connection data

Connection name	Input side
Connection method	Push-in connection
Stripping length	10 mm
Conductor cross section solid	0.14 mm² … 2.5 mm²
Conductor cross section flexible	0.14 mm² … 2.5 mm²
	0.2 mm² … 2.5 mm² (Single ferrule)
	2x 0.5 mm² … 1 mm² (TWIN ferrule)
Conductor cross section AWG	26 … 14

Connection data 2

Connection name	Output side
Connection method	Push-in connection
Stripping length	10 mm
Conductor cross section solid	0.14 mm² … 2.5 mm²
Conductor cross section flexible	0.14 mm² … 2.5 mm²
	0.2 mm² … 2.5 mm² (Single ferrule)
	2x 0.5 mm² … 1 mm² (TWIN ferrule)
Conductor cross section AWG	26 … 14

Standards and Regulations

Standards/regulations	EN 50178
	EN 61810-1
Rated insulation voltage	250 V AC
Rated surge voltage	6 kV
Insulation	Safe isolation, reinforced insulation
Pollution degree	2
Overvoltage category	III

Environmental Product Compliance

China RoHS	Environmentally Friendly Use Period = 50
	For details about hazardous substances go to tab “Downloads”, Category “Manufacturer’s declaration”

Classifications

[email protected]

[email protected] 8.0	27371603
[email protected] 9.0	27371603

ETIM

ETIM 5.0	EC001456
ETIM 6.0	EC001456
ETIM 7.0	EC001456

Drawings
Dimensions
Input data
General
Connection data 2
Environmental Product Compliance

Note
Ambient conditions
Output data
Connection data
Standards and Regulations
Classifications

Drawings


Circuit diagram

Dimensions

Width	14 mm
Height	80 mm
Depth	94 mm

(+84) 908 556 822

(+84) 938 388 289