MACX MCR-TC-I 1050228 PHOENIX CONTACT Temperature transducer: converts signals from thermocouples and mV sou..

Temperature transducer: converts signals from thermocouples and mV sources into 0/4…20 mA signals. Freely programmable, 3-way electrical isolation, screw connection, SIL.

sản phẩm chính hãng, MỚI 100% CHƯA SỬ DỤNG
SẢN PHẨM LUÔN ĐƯỢC KIỂM TRA TRƯỚC KHI XUẤT KHO
BẢO HÀNH 12 THÁNG ĐỐI VỚI LỖI CỦA NHÀ SẢN XUẤT / HOẶC THEO CHÍNH SÁCH CỦA SẢN PHẨM DO TRƯỜNG THỊNH PHÂN PHỐI
HỖ TRỢ KỸ THUẬT 24/7
MIỄN PHÍ GIAO HÀNG ĐỐI VỚI CÁC ĐƠN HÀNG TỪ 8,000,000VNĐ

Liên hệ:

Mô tả

Key Commercial Data

Orderkey	1050228
Packing unit	1 pc
Catalog page	Page 132 (C-5-2019)
GTIN	4055626662794
Weight per Piece (excluding packing)	0.000 g
Custom tariff number	85437090
Country of origin	DE (Germany)

Drawings
Dimensions
Input data
Power supply
EMC data
Environmental Product Compliance

Note
Ambient conditions
Output data
General
Standards and Regulations
Classifications

Drawings


Block diagram		Pictogram

Note

Utilization restriction	EMC: class A product, see manufacturer’s declaration in the download area

Dimensions

Width	12.5 mm
Height	112.5 mm
Depth	114.5 mm

Ambient conditions

Ambient temperature (operation)	-40 °C … 70 °C (Any mounting position)
Ambient temperature (storage/transport)	-40 °C … 80 °C
Maximum altitude	≤ 2000 m
Permissible humidity (operation)	5 % … 95 % (non-condensing)
Noise immunity	EN 61000-6-2 When being exposed to interference, there may be minimal deviations.

Input data

Sensor types that can be used (TC)	B, E, J, K, N, R, S, T, L, U, C, D, A-1, A-2, A-3, M, Lr
Temperature measuring range	-250 °C … 2500 °C (Range depending on the sensor type)
Input signal range	-1000 mV … 1000 mV
Measuring range span	Min. 50 K with thermocouple, 10% of the nominal span of the respective range with mV sources

Output data

Signal output	Current output
Configurable/programmable	Yes
Current output signal	0 mA … 20 mA
	4 mA … 20 mA (SIL)
Load/output load current output	≤ 600 Ω
Output ripple (current)	< 15 µA_PP
Behavior in the event of a sensor error	As per NE 43 or can be freely defined

Power supply

Nominal supply voltage	24 V DC
Supply voltage range	19.2 V DC … 30 V DC (24 V DC -20%…+25%)
Max. current consumption	< 40 mA (24 V DC)
Power dissipation	≤ 0.76 W
Power consumption	≤ 1 W

General

No. of channels	1
Transmission error, typical	0.1 % (E.g., for type J, 600 K span, 4 mA … 20 mA)
Temperature coefficient, typical	0.01 %/K
Typical cold point errors	± 2 K
Step response (0–99%)	typ. 700 ms
	≤ 1000 ms
Alignment zero	± 5 %
Alignment span	± 5 %
Status display	Green LED (supply voltage, PWR)
	Red LED, flashing 2.4 Hz (cable error, sensor error on input or output, ERR)
	Red LED, flashing 1.2 Hz (service operation, ERR)
	Red LED, permanently on (module error, ERR)
Electromagnetic compatibility	Conformance with EMC directive
Interference emission	EN 61000-6-4
Housing material	PA 6.6-FR
Color	gray
Designation	Input/output/power supply
Electrical isolation	300 V_rms(Rated insulation voltage (overvoltage category II; degree of pollution 2, safe isolation as per EN 61010-1))
	2.5 kV (50 Hz, 1 min., test voltage)
Designation	Input/output
Electrical isolation	375 V (Peak value in accordance with EN 60079-11)
Designation	Input/power supply
Electrical isolation	375 V (Peak value in accordance with EN 60079-11)
Conformance	CE-compliant, additionally EN 61326
ATEX	 II 3 G Ex ec ic IIC T4 Gc
IECEx	Ex ec ic IIC T4 Gc
SIL	2

EMC data

Designation	Electromagnetic RF field
Standards/regulations	EN 61000-4-3
Typical deviation from the measuring range final value	1 %
Designation	Fast transients (burst)
Standards/regulations	EN 61000-4-4
Typical deviation from the measuring range final value	1 %
Designation	Conducted interferences
Standards/regulations	EN 61000-4-6
Typical deviation from the measuring range final value	1 %

Standards and Regulations

Electromagnetic compatibility	Conformance with EMC directive
Noise emission	EN 61000-6-4
Designation	Electromagnetic RF field
Standards/regulations	EN 61000-4-3
	EN 61000-4-4
Designation	Conducted interferences
Standards/regulations	EN 61000-4-6
Conformance	CE-compliant, additionally EN 61326
ATEX	 II 3 G Ex ec ic IIC T4 Gc
IECEx	Ex ec ic IIC T4 Gc
DNV GL-Temperature	B
DNV GL-Humidity	B
DNV GL-Vibration	A
DNV GL-EMC	B
DNV GL-Enclosure	Required protection according to the Rules shall be provided upon installation on board

Environmental Product Compliance

REACh SVHC	Lead 7439-92-1
China RoHS	Environmentally Friendly Use Period = 50
	For details about hazardous substances go to tab “Downloads”, Category “Manufacturer’s declaration”

Classifications

[email protected]

[email protected] 8.0	27200206
[email protected] 9.0	27210129

ETIM

ETIM 5.0	EC001446
ETIM 6.0	EC002919
ETIM 7.0	EC002919

Drawings
Dimensions
Input data
Power supply
EMC data
Environmental Product Compliance

Note
Ambient conditions
Output data
General
Standards and Regulations
Classifications

Drawings


Block diagram		Pictogram

Dimensions

Width	12.5 mm
Height	112.5 mm
Depth	114.5 mm

MÁY IN CÔNG NGHIỆP

MÁY SẢN XUẤT KHÍ NI-TƠ

MÁY ĐÓNG GÓI

DỊCH VỤ TƯ VẤN

Dịch vụ tư vấn - Khảo sát miễn phí duy nhất tại Trường Thịnh Tech

thi công lắp đặt

Trường Thịnh Tech cung cấp và lắp đặt hoàn thiện dự án

bảo dưỡng định kỳ

Bảo hành - bảo dưỡng với các sản phẩm, dịch vụ do Trường Thịnh Tech cấp ra

THIẾT BỊ

Trường Thịnh cung cấp thiết bị và máy móc trọn gói, đúng chuẩn cho Quý doanh nghiệp