TTC-6-3-HF-F-24AC-PT-I 1088786 PHOENIX CONTACT Surge protection with integrated status indicator for three s..
TTC-6-3-HF-F-24AC-PT-I 1088786 PHOENIX CONTACT Surge protection with integrated status indicator for three s..
Surge protection with integrated status indicator for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps). Indirect grounding via gas discharge tube.
Liên hệ:
Key Commercial Data
| Orderkey | 1088786 |
|---|---|
| Packing unit | 1 |
| GTIN | 4055626891712 |
| Custom tariff number | 85363010 |
Ambient conditions
| Ambient temperature (operation) | -40 °C … 85 °C |
|---|---|
| Ambient temperature (storage/transport) | -40 °C … 85 °C |
| Permissible humidity (operation) | 5 % … 95 % (non-condensing) |
| Altitude | ≤ 4000 m (amsl (above mean sea level)) |
| Degree of protection | IP20 |
General
| Housing material | PBT |
|---|---|
| Flammability rating according to UL 94 | V-0 |
| Color | traffic grey A RAL 7042 |
| Mounting type | DIN rail: TH 35 – 7.5 mm |
| Type | DIN rail module, one-piece |
| Direction of action | Line-Line & Line-Signal Ground/Shield & optional Signal Ground/Shield-Earth Ground |
Protective circuit
| IEC test classification | C1 |
|---|---|
| C2 | |
| C3 | |
| D1 | |
| Nominal voltage UN | 24 V AC |
| Maximum continuous voltage UC | 43 V DC |
| 30 V AC | |
| Rated current | 600 mA (40 °C) |
| Residual current IPE | ≤ 1 µA |
| Nominal discharge current In(8/20) µs | 10 kA |
| Pulse discharge current Iimp(10/350) µs | 2.5 kA |
| Total discharge current Itotal(8/20) µs | 10 kA |
| Voltage protection level Up(line-line) | ≤ 80 V (C1 – 1 kV/500 A) |
| ≤ 80 V (C1 – 1 kV / 500 A, >1 µs) | |
| ≤ 150 V (C2 – 10 kV / 5 kA) | |
| ≤ 70 V (C2 – 10 kV / 5 kA, >1 µs) | |
| ≤ 75 V (C3 – 100 A) | |
| ≤ 75 V (C3 – 100 A, >1 µs) | |
| Voltage protection level Up(line-earth) | ≤ 900 V (C1 – 1 kV/500 A) |
| ≤ 100 V (C1 – 1 kV / 500 A, >1 µs) | |
| ≤ 1 kV (C2 – 10 kV / 5 kA) | |
| ≤ 70 V (C2 – 10 kV / 5 kA, >1 µs) | |
| ≤ 1200 V (C3 – 100 A) | |
| ≤ 70 V (C3 – 100 A, >1 µs) | |
| Voltage protection level Up(line-signalground) | ≤ 90 V (C1 – 1 kV/500 A) |
| ≤ 90 V (C1 – 1 kV / 500 A, >1 µs) | |
| ≤ 170 V (C2 – 10 kV / 5 kA) | |
| ≤ 70 V (C2 – 10 kV / 5 kA, >1 µs) | |
| ≤ 75 V (C3 – 70 A) | |
| ≤ 75 V (C3 – 70 A, >1 µs) | |
| Response time tA(line-line) | ≤ 1 ms |
| Response time tA(line-signalground) | ≤ 1 ms |
| Response time tA(line-earth) | ≤ 55 ms |
| Input attenuation aE, sym. | typ. 0.3 dB (≤ 10 MHz/150 Ω) |
| Cut-off frequency fg (3 dB), sym. in 150 Ohm system | typ. 60 MHz |
| Capacity (line-line) | typ. 25 pF |
| Capacity (line-signalground) | typ. 25 pF |
| Capacity (line-earth) | typ. 50 pF |
| Resistance per path | 1.65 Ω ±20 % |
| Max. required back-up fuse | 630 mA (FF) |
| Impulse durability (line-line) | C1 – 1 kV / 500 A |
| C2 – 10 kV / 5 kA | |
| C2 – 10 kA | |
| C3 – 100 A | |
| Impulse durability (line-earth) | C1 – 1 kV / 500 A |
| C2 – 10 kV / 5 kA | |
| C2 – 10 kA | |
| C3 – 100 A | |
| D1 – 2.5 kA | |
| Impulse durability (line-signalground) | C1 – 1 kV / 500 A |
| C2 – 10 kV / 5 kA | |
| C2 – 10 kA | |
| C3 – 70 A |
Connection data
| Connection method | Push-in connection |
|---|---|
| Stripping length | 8 mm |
| Conductor cross section flexible | 0.2 mm² … 2.5 mm² |
| Conductor cross section solid | 0.2 mm² … 4 mm² |
| Conductor cross section AWG | 24 … 12 |
Standards and Regulations
| Standards/specifications | IEC 61643-21 2000 + A1:2008 + A2:2012 |
|---|---|
| EN 61643-21 2001 + A1:2009 + A2:2013 |
Classifications
Sản phẩm tương tự
Industrial Relays
Industrial Relays
REL-IR/LDP- 12DC/4X21AU 2834083 PHOENIX CONTACT Single relay
Industrial Relays
Industrial Relays
Industrial Relays
Industrial Relays
Industrial Relays
