Key Commercial Data
Orderkey | 1143069 |
---|---|
Packing unit | 1 |
GTIN | 4063151130329 |
Custom tariff number | 85444290 |
General
Rated voltage | 120 V AC |
---|---|
120 V DC | |
Current carrying capacity per I/O signal | 2 A |
Current carrying capacity per slot | 4 A |
Total rated current | 10 A |
Number of slots | 4 |
Note | NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. |
Insulation material
Housing material | PBT |
---|---|
Material of contact, master cable side | CU alloy |
Material of contact surface, master cable side | Sn |
Material of the contact carrier on the master cable side | PA |
Sealing material | NBR |
Cable
Cable type | PUR/PVC black |
---|---|
Cable type (abbreviation) | PUR |
Cable abbreviation | LiYY11Y-HF |
UL AWM style | 20549 |
Conductor cross section | 8x 0.5 mm² (Signal line) |
3x 1 mm² (power line) | |
AWG signal line | 20 |
AWG power supply | 17 |
Conductor structure signal line | 28x 0.15 mm |
Conductor structure, voltage supply | 56x 0.15 mm |
Core diameter including insulation | 1.5 mm ±0.1 mm (Signal line) |
2.1 mm ±0.1 mm (power line) | |
Wire colors | brown, blue, green/yellow, white, green, yellow, gray, gray/pink, red/blue, white/green, brown/green |
Overall twist | Wires twisted in layers |
External sheath, color | black RAL 9005 |
Inner sheath thickness | ≥ 0.15 mm |
Outer sheath thickness | ≥ 0.38 mm |
External cable diameter D | 8.7 mm ±0.2 mm |
Minimum bending radius, fixed installation | 7.5 x D |
Minimum bending radius, flexible installation | 10 x D |
Number of bending cycles | 1500000 |
Bending radius | 87 mm |
Traversing path | 2 m |
Traversing rate | 2 m/s |
Cable weight | 122 kg/km |
Outer sheath, material | PUR |
Material, inner sheath | PVC |
Material conductor insulation | PVC |
Conductor material | Bare Cu litz wires |
Nominal voltage, cable | 300 V |
Test voltage, cable | 2000 V |
Special properties | Silicone-free |
Flame resistance | DIN EN 50265 |
Resistance to oil | according to VDE 0472 Part 803 |
Other resistance | Highly resistant to acids, alkaline solutions and solvents |
Ambient temperature (operation) | -40 °C … 90 °C (cable, fixed installation) |
-5 °C … 80 °C (cable, flexible installation) |