Key Commercial Data
Orderkey | 2866255 |
---|---|
Packing unit | 1 pc |
Catalog page | Page 484 (IF-2007) |
GTIN | 4017918951191 |
Weight per Piece (excluding packing) | 1,300.000 g |
Custom tariff number | 85044030 |
Country of origin | TH (Thailand) |
Dimensions
Width | 85 mm |
---|---|
Height | 130 mm |
Depth | 125 mm |
Width with alternative assembly | 122 mm |
Height with alternative assembly | 130 mm |
Depth with alternative assembly | 88 mm |
Ambient conditions
Degree of protection | IP20 |
---|---|
Ambient temperature (operation) | -25 °C … 70 °C (> 60 °C Derating: 2.5 %/K) |
Ambient temperature (storage/transport) | -40 °C … 85 °C |
Max. permissible relative humidity (operation) | 95 % (at 25 °C, non-condensing) |
Input data
Nominal input voltage range | 100 V AC … 240 V AC |
---|---|
Input voltage range | 85 V AC … 264 V AC |
90 V DC … 350 V DC | |
AC frequency range | 45 Hz … 65 Hz |
Frequency range DC | 0 Hz |
Current consumption | approx. 2.2 A (120 V AC) |
1.2 A (230 V AC) | |
Nominal power consumption | 263 W |
Inrush surge current | < 15 A (typical) |
Mains buffering | > 50 ms (120 V AC) |
> 50 ms (230 V AC) | |
Input fuse | 6.3 A (slow-blow, internal) |
Choice of suitable circuit breakers | 10 A … 16 A (Characteristics B, C, D, K) |
Type of protection | Transient surge protection |
Protective circuit/component | Varistor |
Output data
Nominal output voltage | 48 V DC ±1 % |
---|---|
Setting range of the output voltage (USet) | 40 V DC … 56 V DC |
Nominal output current (IN) | 5 A (up to 60°C) |
POWER BOOST (IBoost) | 7.5 A |
Connection in parallel | Yes, for redundancy and increased capacity |
Connection in series | yes |
Max. capacitive load | unlimited |
Residual ripple | < 30 mVPP |
Output power | 240 W |
Typical response time | < 1 s |
Peak switching voltages nominal load | < 50 mVPP(20 MHz) |
Maximum power dissipation in no-load condition | 2 W |
Power loss nominal load max. | 24 W |
General
Net weight | 1.3 kg |
---|---|
Operating voltage display | Green LED |
Efficiency | > 91 % |
Insulation voltage input/output | 4 kV (type test) |
2 kV (routine test) | |
Protection class | I (with PE connection) |
Degree of protection | IP20 |
MTBF (IEC 61709, SN 29500) | > 500000 h |
Mounting position | horizontal DIN rail NS 35, EN 60715 |
Assembly instructions | alignable: horizontally 0 mm, vertically 50 mm |